Bonjour à tous, j'ai une question; google n'a pas été mon ami cette fois ci je veux mettre 4 routeurs (sous freifunk) ensemble (avec 4 antennes panneaux : nord sud est ouest sur un meme mat) et les reliés tous par leur interface WAN; pour faire un semblant de super antenne omni .
j'ai trouvé la solution pour deux routeurs --- To interconnect two nodes with an ethernet wire, this setup is easy: Connect two nodes via WAN port. Configure both WAN/IP with a narrow netmask using 4 IPs out of the mesh range. Example (10.0.0.0/8 used in mesh): Node1/WAN has 10.111.222.65/255.255.255.252 and Node2/WAN has 10.111.222.66/255.255.255.252. Of course the Wifi IP is not in the 64/65/66/67 range of this mini network segment. Firewall+NAT between the to WAN ports is open then, Firewall on LAN still active. OLSR is used to route automatically through WAN/WAN if this connection has lower packet loss. May be optimized with Admin/OLSR/Filter to exclude the neighbours wifi IP address. ---- Puis je appliquer cette solution à 4 routeurs en WAN ? ou quelqu'un a deja eu ce cas là ? -- Mathias HOUNGBO http://mathias.houngbo.net/ (mon blog) http://www.cotonou-wireless.org (le wifi enchainé)
