toujours pour ma question; une image pour mieux illustré : http://www.communautel.net/IMG/jpg/Antennes_sectorielles.jpg
Le 2 mai 2008 09:15, Mathias HOUNGBO <[EMAIL PROTECTED]> a écrit : > Bonjour à tous, > > j'ai une question; google n'a pas été mon ami cette fois ci > je veux mettre 4 routeurs (sous freifunk) ensemble > (avec 4 antennes panneaux : nord sud est ouest sur un meme mat) > et les reliés tous par leur interface WAN; pour faire un semblant de super > antenne omni . > > > j'ai trouvé la solution pour deux routeurs > --- > To interconnect two nodes with an ethernet wire, this setup is easy: > Connect two nodes via WAN port. Configure both WAN/IP with a narrow > netmask using 4 IPs out of the mesh range. Example (10.0.0.0/8 used > in mesh): Node1/WAN has 10.111.222.65/255.255.255.252 and Node2/WAN has > 10.111.222.66/255.255.255.252. Of course the Wifi IP is not in the > 64/65/66/67 range of this mini network segment. Firewall+NAT between the > to WAN ports is open then, Firewall on LAN still active. OLSR is used > to route automatically through WAN/WAN if this connection has lower packet > loss. May be optimized with Admin/OLSR/Filter to exclude the neighbours > wifi IP address. > ---- > > > Puis je appliquer cette solution à 4 routeurs en WAN ? ou quelqu'un a deja > eu ce cas là ? > > > > > -- > Mathias HOUNGBO > http://mathias.houngbo.net/ (mon blog) > http://www.cotonou-wireless.org (le wifi enchainé) -- Mathias HOUNGBO http://mathias.houngbo.net/ (mon blog) http://www.cotonou-wireless.org (le wifi enchainé)
