Re: [edk2-devel] EDK2 environment setup

Sean Mon, 04 May 2020 10:35:44 -0700

A few things.

1. Do you have a log from the console?

2. Are you running WinHost.exe from a command line with current workingdirectory set to the same folder? Is it finding your FD?


For example if I run from the wrong folder i see.

C:\src\Platform-Ci\edk2\Build\EmulatorX64\DEBUG_VS2019>X64\WinHost.exe

EDK II WIN Host Emulation Environment from http://www.tianocore.org/edk2/
  BootMode 0x00
  OS Emulator passing in 128 KB of temp RAM at 0xe60a0000 to SEC

ERROR : Can not open Firmware Device File ../FV/FV_RECOVERY.fd (0xE).Exiting.



If I run with CWD set to X64 folder then it works fine.

3. If you want, the platform CI has landed into master. The emulator isbeing build and booted to shell on each PR. You can follow the sameprocess.

https://github.com/tianocore/edk2/tree/master/EmulatorPkg/PlatformCI#building-with-pytools-for-emulatorpkg


Thanks
Sean



On 5/3/2020 10:17 PM, navdeeppal.si...@dell.com wrote:

Hi,
Any suggestions.

Regards,
Navdeep

From: Singh, Navdeeppal
Sent: Thursday, April 30, 2020 10:39 AM
To: 'Leif Lindholm'; 'devel@edk2.groups.io'; 'guomin.ji...@intel.com'
Cc: 'spbro...@outlook.com'; 'sean.bro...@microsoft.com'; 
'bret.barke...@microsoft.com'; 'jim.slaugh...@sage-micro.com'
Subject: RE: [edk2-devel] EDK2 environment setup


Hi,

After launching Winhost.exe. Emulator exits after displaying "Sec Has Started".

I have not built any platform pkgs yet. This is just after building Emulator 
Pkg .

To boot to Shell what shall I do. How can I achive this.

Is there a document I can refer to.

[cid:image001.jpg@01D62201.0F368030]



Regards,

Navdeep

-----Original Message-----
From: Singh, Navdeeppal
Sent: Tuesday, April 28, 2020 3:23 PM
To: 'Leif Lindholm'; devel@edk2.groups.io<mailto:devel@edk2.groups.io>; 
guomin.ji...@intel.com<mailto:guomin.ji...@intel.com>
Cc: spbro...@outlook.com<mailto:spbro...@outlook.com>; 
sean.bro...@microsoft.com<mailto:sean.bro...@microsoft.com>; 
bret.barke...@microsoft.com<mailto:bret.barke...@microsoft.com>; 
jim.slaugh...@sage-micro.com<mailto:jim.slaugh...@sage-micro.com>
Subject: RE: [edk2-devel] EDK2 environment setup



Thank you.

Able to build Emulator pkg after adding VS2019 build options.

Regards,

Navdeep



-----Original Message-----

From: Leif Lindholm <l...@nuviainc.com<mailto:l...@nuviainc.com>>

Sent: Tuesday, April 28, 2020 3:18 PM

To: devel@edk2.groups.io<mailto:devel@edk2.groups.io>; 
guomin.ji...@intel.com<mailto:guomin.ji...@intel.com>

Cc: Singh, Navdeeppal; spbro...@outlook.com<mailto:spbro...@outlook.com>; 
sean.bro...@microsoft.com<mailto:sean.bro...@microsoft.com>; 
bret.barke...@microsoft.com<mailto:bret.barke...@microsoft.com>; 
jim.slaugh...@sage-micro.com<mailto:jim.slaugh...@sage-micro.com>

Subject: Re: [edk2-devel] EDK2 environment setup





[EXTERNAL EMAIL]



My bad, was checking on a different computer than I thought where the

edk2 checkout wasn't up to date. Still, gives me a way to close out the 
stackoverflow question, so thanks :)



/

     Leif



On Tue, Apr 28, 2020 at 09:35:22 +0000, Guomin Jiang wrote:

It is known issue and can refer 
https://bugzilla.tianocore.org/show_bug.cgi?id=2637 for detail.

It have been fixed in newest repository, you can update to the newest 
repository and try again.

From: devel@edk2.groups.io<mailto:devel@edk2.groups.io> 
<devel@edk2.groups.io<mailto:devel@edk2.groups.io>> On Behalf Of

navdeeppal.si...@dell.com<mailto:navdeeppal.si...@dell.com>

Sent: Tuesday, April 28, 2020 5:15 PM

To: spbro...@outlook.com<mailto:spbro...@outlook.com>; 
devel@edk2.groups.io<mailto:devel@edk2.groups.io>;

sean.bro...@microsoft.com<mailto:sean.bro...@microsoft.com>; 
bret.barke...@microsoft.com<mailto:bret.barke...@microsoft.com>;

jim.slaugh...@sage-micro.com<mailto:jim.slaugh...@sage-micro.com>

Subject: Re: [EXTERNAL] [edk2-devel] EDK2 environment setup

Hi,

Yes I am using edksetup.bat.

I was able to fix VFR compiler after making path changes.

And I was able to build MdeModulePkg Successfully.

But while building Emulator Pkg. I see the following Linker Error. Do I need to 
build some other module before building Emulator Pkg.

[cid:image001.jpg@01D61D83.5E9F0750]

Regards,

Navdeep

-----Original Message-----

From: Sean Brogan 
<spbro...@outlook.com<mailto:spbro...@outlook.com<mailto:spbro...@outlook.com%3cmailto:spbro...@outlook.com>>>

Sent: Tuesday, April 28, 2020 2:28 AM

To: 
devel@edk2.groups.io<mailto:devel@edk2.groups.io<mailto:devel@edk2.groups.io%3cmailto:devel@edk2.groups.io>>;
 Singh,

Navdeeppal;

sean.bro...@microsoft.com<mailto:sean.bro...@microsoft.com<mailto:sean.bro...@microsoft.com%3cmailto:sean.bro...@microsoft.com>>;

bret.barke...@microsoft.com<mailto:bret.barke...@microsoft.com<mailto:bret.barke...@microsoft.com%3cmailto:bret.barke...@microsoft.com>>;

jim.slaugh...@sage-micro.com<mailto:jim.slaugh...@sage-micro.com<mailto:jim.slaugh...@sage-micro.com%3cmailto:jim.slaugh...@sage-micro.com>>

Subject: Re: [EXTERNAL] [edk2-devel] EDK2 environment setup

[EXTERNAL EMAIL]

Are you using edksetup.bat?  I would have expected this code to set the path 
for you.

https://github.com/tianocore/edk2/blob/master/BaseTools/toolsetup.bat#<https://github.com/tianocore/edk2/blob/master/BaseTools/toolsetup.bat>

L134

   So without more logs i don't know.

If you want to use "stuart" (my preferred method) I have a commit here for 
EmulatorPkg which has a platformbuild.py and readme.md that describes the process.  This 
should be committed to edk2 master this week to enable Platform CI for every PR.

Here is the readme and details.

https://github.com/spbrogan/edk2/tree/PlatformAndCoreCIForOvmfArmVirtE

mulatorPackages_v10/EmulatorPkg/PlatformCI

Here is the commit you should cherry-pick if you want to try it.

https://github.com/spbrogan/edk2/commit/8bdb9075b52a9d1c196b068729eefd

76f068d0a2

Thanks

Sean

On 4/27/2020 1:26 AM, 
navdeeppal.si...@dell.com<mailto:navdeeppal.si...@dell.com<mailto:navdeeppal.si...@dell.com%3cmailto:navdeeppal.si...@dell.com>>
 wrote:

Hi,

Thanks for your help.

I am to build base tools and able to generate bin files.

"Build" command is generated.

Later, I am trying to build "EmulatorPkg".

And running into VfrCompile error.

'VfrCompile' is not recognized as an internal or external command,

operable program or batch file.

NMAKE : fatal error U1077: '"VfrCompile' : return code '0x1'

Stop.

'VfrCompile' is not recognized as an internal or external command,

operable program or batch file.

I can see VfrCompile.exe generated in "BaseTools".

Attached build log for "Emulator Pkg".

I tried checking the Env Paths .

Regards,

Navdeep

*From:* Sean Brogan

<sean.bro...@microsoft.com<mailto:sean.bro...@microsoft.com<mailto:sean.bro...@microsoft.com%3cmailto:sean.bro...@microsoft.com>>>

*Sent:* Friday, April 24, 2020 12:33 AM

*To:* 
devel@edk2.groups.io<mailto:devel@edk2.groups.io<mailto:devel@edk2.groups.io%3cmailto:devel@edk2.groups.io>>;
 Singh,

Navdeeppal; Bret Barkelew;

jim.slaugh...@sage-micro.com<mailto:jim.slaugh...@sage-micro.com<mailto:jim.slaugh...@sage-micro.com%3cmailto:jim.slaugh...@sage-micro.com>>

*Subject:* RE: [EXTERNAL] [edk2-devel] EDK2 environment setup

[EXTERNAL EMAIL]

Navdeep,

Yes since the 202002 stable tag there have been submodules

introduced

to the basetools.  If you look closely you will see in the CI

process

this required a change where stuart_setup is run before calling

edk2toolsbuild.py.

https://github.com/tianocore/edk2/commit/e1fbff3ded87704fb0086f9b5fb

8080eb4db51#diff-6973939bf9ad6f6a3082d99ce3b32ff1

If you are using "stuart" to build then that is the suggested path

as

stuar_setup will init your submodules listed in the

RequiredSubmodules

(https://github.com/tianocore/edk2/blob/master/.pytool/CISettings.py#L136).

Given that the edk2 project and ecosystem has numerous ways to setup

your environment and build, you can also just make sure your

workspace

is complete prior to running Edk2ToolsBuild.py.  In this case you

only

need to run "git submodule update --init"

I just did this and it works fine with VS2019.

Jim,

Just as fyi as I know there are lots of reasons for toolchain selection.

I believe the Visual studio build tools are available free of charge

(not the IDE but the compilers).   Directions here.

https://microsoft.github.io/mu/CodeDevelopment/prerequisites/#visual

-s

tudio-2019-preferred

Thanks

Sean

*From:* 
devel@edk2.groups.io<mailto:devel@edk2.groups.io<mailto:devel@edk2.groups.io%3cmailto:devel@edk2.groups.io>>

<mailto:devel@edk2.groups.io>

<devel@edk2.groups.io

<mailto:devel@edk2.groups.io<mailto:devel@edk2.groups.io%20%3cmailto

:devel@edk2.groups.io>>> *On Behalf Of

*Navdeeppal.Singh via groups.io

*Sent:* Thursday, April 23, 2020 9:14 AM

*To:* Bret Barkelew <bret.barke...@microsoft.com

<mailto:bret.barke...@microsoft.com>>;

devel@edk2.groups.io<mailto:devel@edk2.groups.io<mailto:devel@edk2.groups.io%3cmailto:devel@edk2.groups.io>>

<mailto:devel@edk2.groups.io>

*Subject:* Re: [EXTERNAL] [edk2-devel] EDK2 environment setup

Hi Bret,

Yes PIP requirements are up to date.

On further digging through the logging file BASETOOLS_BUILD.txt.

INFO - subprocess not exit successfully

INFO - Error while execute command 'nmake all' in direcotry

C:\edk2\BaseTools\Source\C\BrotliCompress

Regards,

Navdeep

*From:* Bret Barkelew <bret.barke...@microsoft.com

<mailto:bret.barke...@microsoft.com>>

*Sent:* Thursday, April 23, 2020 9:37 PM

*To:* 
devel@edk2.groups.io<mailto:devel@edk2.groups.io<mailto:devel@edk2.groups.io%3cmailto:devel@edk2.groups.io>>

<mailto:devel@edk2.groups.io>; Singh,

Navdeeppal

*Subject:* RE: [EXTERNAL] [edk2-devel] EDK2 environment setup

[EXTERNAL EMAIL]

Have you installed the up-to-date Python requirements? "pip install

-upgrade -r pip-requirements.txt"?

That's the first thing I would check. Otherwise, happy to look at

the

problem with you.

- Bret

*From: *NAVDEEPPAL_SINGH via groups.io

<mailto:NAVDEEPPAL_SINGH=dell....@groups.io>

*Sent: *Thursday, April 23, 2020 6:05 AM

*To: 
*devel@edk2.groups.io<mailto:*devel@edk2.groups.io<mailto:*devel@edk2.groups.io%3cmailto:*devel@edk2.groups.io>>

<mailto:devel@edk2.groups.io>

*Subject: *[EXTERNAL] [edk2-devel] EDK2 environment setup

I am trying to setup EDK2 environment setup from Tianocore/EDK2.

While doing the Base Tool setup. After running

BaseTool/EDK2ToolsBuild.py -t VS2019 Getting following error :-

c:\edk2\BaseTools>python Edk2ToolsBuild.py  -t VS2019 SECTION - Init

SDE SECTION - Loading Plugins SECTION - Start Invocable Tool

Traceback

(most recent call last):

    File "Edk2ToolsBuild.py", line 177, in <module>

      main()

    File "Edk2ToolsBuild.py", line 173, in main

      Edk2ToolsBuild().Invoke()

    File "C:\Program

Files\Python38\lib\site-packages\edk2toolext\base_abstract_invocable

.p

y", line 141, in Invoke

      retcode = self.Go()

    File "Edk2ToolsBuild.py", line 139, in Go

      raise Exception("Failed to build.")

Exception: Failed to build.

set EDK_TOOLS_PATH=C:\edk2\BaseTools

set EDK_TOOLS_BIN=C:\edk2\BaseTools\Bin\Win32

Can some one help


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#58563): https://edk2.groups.io/g/devel/message/58563
Mute This Topic: https://groups.io/mt/73323736/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub  [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [edk2-devel] EDK2 environment setup

Reply via email to