[AMD Official Use Only - General] > -----Original Message----- > From: Konstantin Aladyshev <aladyshe...@gmail.com> > Sent: Saturday, October 14, 2023 4:26 PM > To: Chang, Abner <abner.ch...@amd.com> > Cc: disc...@edk2.groups.io; devel@edk2.groups.io > Subject: Re: [edk2-devel] [edk2-discuss] PLDM messages via MCTP over KCS > > Caution: This message originated from an External Source. Use proper caution > when opening attachments, clicking links, or responding. > > > Sorry I got confused a little bit by your answer. > You were talking about PLDM TIDs (Terminus IDs) and I was asking about > MCTP EIDs. Don't they like different concepts? Or did you mean that we > need to have a mapping of TIDs<-->EIDs in PldmProtocolLib? I just distinguish the ID naming for PLDM and MCTP using the terminologies defined in spec. For PLDM to MCTP, the values are the same as the SID and EID are passed to MCTP from PLDM.
> > > I reviewed these patches just now, that looks good to me. However this way > we don’t have the history in the mailing list. > If the code looks good to you, I'll try to properly format all our > patches and send them to the mailing list next week. Ok, I see. > > > BTW, are you an individual contributor or you are the representative of a > firm? > As a part of my job I develop UEFI and BMC firmware. But all the > open-source work that I do I perform on my own free time. So you can > count me as an individual contributor) I am asking this because I am looking for an additional reviewer for ManageabilityPkg as the replacement of Isaac from Intel as he is no longer works on edk2 stuff. Thanks Abner > > Best regards, > Konstantin Aladyshev > > On Sat, Oct 14, 2023 at 11:06 AM Chang, Abner <abner.ch...@amd.com> > wrote: > > > > [AMD Official Use Only - General] > > > > > -----Original Message----- > > > From: Konstantin Aladyshev <aladyshe...@gmail.com> > > > Sent: Friday, October 13, 2023 8:16 PM > > > To: Chang, Abner <abner.ch...@amd.com> > > > Cc: disc...@edk2.groups.io; devel@edk2.groups.io > > > Subject: Re: [edk2-devel] [edk2-discuss] PLDM messages via MCTP over > KCS > > > > > > Caution: This message originated from an External Source. Use proper > caution > > > when opening attachments, clicking links, or responding. > > > > > > > > > Hi Chang! > > > > > > Thanks for the response! > > > Is it ok that because of 1) we would need to include MCTP > > > SrcEID/DstEID in each function of the > PLDM_SMBIOS_TRANSFER_PROTOCOL? > > > > > > https://github.com/tianocore/edk2- > > > > platforms/blob/06f6274d56422084281886fad447ab117fd0e487/Features/ > > > > ManageabilityPkg/Universal/PldmSmbiosTransferDxe/PldmSmbiosTransferDx > > > e.c#L459 > > > ``` > > > EDKII_PLDM_SMBIOS_TRANSFER_PROTOCOL_V1_0 > > > mPldmSmbiosTransferProtocolV10 = { > > > GetSmbiosStructureTableMetaData, > > > SetSmbiosStructureTableMetaData, > > > GetSmbiosStructureTable, > > > SetSmbiosStructureTable, > > > GetSmbiosStructureByType, > > > GetSmbiosStructureByHandle > > > }; > > > ``` > > For the PLDM_SMBIOS_TRANSFER_PROTOCOL, we can add a API in > EDKII_PLDM_SMBIOS_TRANSFER_PROTOCOL_V1_0 for setting the PLDM > terminus. As adding Terminus STID and DTID seems a burden to this protocol. > > So, we can do this, > > > > Define SetPldmTerminus (UINT8 SourceTid, UINT8 DestinationTid) API and > put it in the first member of > EDKII_PLDM_SMBIOS_TRANSFER_PROTOCOL_V1_0. > > Define PldmSetTerminus in PldmProtocolLib and invoked by > SetPldmTerminus API, this way each PLDM application driver (e.g., SMBIOS) > has its own PLDM terminus ID in the PldmProtocolLib instance. We still define > PCDs for these two PLDM ID which is similar to MCTP protocol. Use PCD > instead in case SourceTid and DestinationTid had never been set in > PldmProtocolLib. > > > > EDKII_PLDM_SMBIOS_TRANSFER_PROTOCOL_V1_0 = > > mPldmSmbiosTransferProtocolV10 = { > > SetPldmTerminus, > > GetSmbiosStructureTableMetaData, > > SetSmbiosStructureTableMetaData, > > GetSmbiosStructureTable, > > SetSmbiosStructureTable, > > GetSmbiosStructureByType, > > GetSmbiosStructureByHandle > > }; > > > > > > > > I've also send you pull requests with my changes to the > > > edk2/edk2-platforms repos: > > > https://github.com/changab/edk2/pull/1 > > > https://github.com/changab/edk2-platforms/pull/6 > > > > > > If you don't mind I would send patches in this fashion before posting > > > them to the mailing list. So you can review them and provide feedback. > > I reviewed these patches just now, that looks good to me. However this way > we don’t have the history in mailing list. > > > > > > > > Also I wanted to ask if you plan to work on the required changes > > > yourself, or am I on my own from here?) > > That would be good if you can help, that is also fine for me to update the > code, however it would be later next week as I have to work on some tasks. > > > > BTW, are you an individual contributor or you are the representative of a > firm? > > > > Thanks > > Abner > > > > > > Best regards, > > > Konstantin Aladyshev > > > > > > On Wed, Oct 11, 2023 at 8:58 AM Chang, Abner > <abner.ch...@amd.com> > > > wrote: > > > > > > > > [AMD Official Use Only - General] > > > > > > > > Hi Aladyshev, > > > > Here is my response, > > > > > > > > 1. Shouldn't we update the PLDM protocol's 'PldmSubmit' function to > > > receive 'MctpSrcEID'/'MctpDestEID'. > > > > Yes, I see the use case of EFI shell application. I would like to have > > > > the > input > > > parameters similar with MctpSubmitCommand. Use pointers for the given > > > SEID and DEID, adopt the fix PCD value of the pointer is NULL. > > > > > > > > 2. The 'PldmProtocolCommon' code contains array ofexpected response > > > sizes. > > > > The idea is as an high level PLDM driver, such as SMBIOS, it doesn't > > > > have > to > > > handle the full size of PLDM message. It should only care about the > response > > > data belong to it. That's why I added the array to define the PLDM > response > > > size for any PLDM spec. > > > > As the PLDM message and PLDM complete code is in a fixe size. I think we > > > can remove the array and just adjust the response size in PLDM Protocol > > > driver. > > > > > > > > 3. The 'AdditionalTransferError' is designed to accommodate error codes > for > > > the specific transport or protocol. We don’t have much implementation of > > > 'AdditionalTransferError' as the entire Manageability needs more practices > to > > > make it more mature. > > > > I suggest we can categorize 'AdditionalTransferError' using the most > > > significant byte, for example > > > > 0x00 - Common additional transfer error. > > > > 0x80 - KCS transport error > > > > 0x81 - MCTP > > > > ... > > > > 0xC0 - IPMI protocol error > > > > 0xC1 - PLDM protocol error > > > > ... > > > > > > > > How do you think? > > > > Thanks > > > > Abner > > > > > > > > > > > > > -----Original Message----- > > > > > From: Konstantin Aladyshev <aladyshe...@gmail.com> > > > > > Sent: Thursday, October 5, 2023 11:18 PM > > > > > To: Chang, Abner <abner.ch...@amd.com> > > > > > Cc: disc...@edk2.groups.io; devel@edk2.groups.io > > > > > Subject: Re: [edk2-devel] [edk2-discuss] PLDM messages via MCTP > over > > > KCS > > > > > > > > > > Caution: This message originated from an External Source. Use proper > > > caution > > > > > when opening attachments, clicking links, or responding. > > > > > > > > > > > > > > > Sorry for many messages today, but I have one more observation. > > > > > > > > > > I think the MCTP code should set specific 'AdditionalTransferError' > > > > > for the caller when it fails on each of the response header checks: > > > > > https://github.com/changab/edk2- > > > > > > > > > platforms/blob/5af7ca1555863288bd2887ca465ad07d74b9868e/Features/ > > > > > > > > > ManageabilityPkg/Universal/MctpProtocol/Common/MctpProtocolCommon. > > > > > c#L464 > > > > > > > > > > But I'm not sure how 'AdditionalTransferError' can be utilized for > > > > > this. Right now the errors are generic for the IPMI/MCTP protocols > > > > > https://github.com/changab/edk2- > > > > > > > > > platforms/blob/5af7ca1555863288bd2887ca465ad07d74b9868e/Features/ > > > > > ManageabilityPkg/Include/Library/ManageabilityTransportLib.h#L63 > > > > > Maybe it would be good to reserve some bits for the protocol specific > > > > > errors? What do you think? > > > > > > > > > > Also I don't see anything like 'AdditionalTransferError' in the PLDM > > > > > protocol code. Shouldn't it also support reporting additional error > > > > > information to the user? > > > > > > > > > > I've also created PRs for your edk2/edk2-platforms forks with some > > > > > things that I've found today. > > > > > https://github.com/changab/edk2/pull/1 > > > > > https://github.com/changab/edk2-platforms/pull/6 > > > > > > > > > > Best regards, > > > > > Konstantin Aladyshev > > > > > > > > > > On Thu, Oct 5, 2023 at 3:31 PM Konstantin Aladyshev > > > > > <aladyshe...@gmail.com> wrote: > > > > > > > > > > > > I was thinking more about it and I think the right solution would be > > > > > > to move these checks to the > > > EDKII_PLDM_SMBIOS_TRANSFER_PROTOCOL > > > > > code > > > > > > (i.e. https://github.com/changab/edk2- > > > > > > > > > platforms/blob/MCTP_OVER_KCS_UPDATE/Features/ManageabilityPkg/Univ > > > > > ersal/PldmSmbiosTransferDxe/PldmSmbiosTransferDxe.c) > > > > > > > > > > > > Because only the PldmSmbios protocol code should know such > > > information > > > > > > as expected response sizes for its commands. > > > > > > > > > > > > Best regards, > > > > > > Konstantin Aladyshev > > > > > > > > > > > > On Thu, Oct 5, 2023 at 3:19 PM Konstantin Aladyshev > > > > > > <aladyshe...@gmail.com> wrote: > > > > > > > > > > > > > > Also I see that the 'PldmProtocolCommon' code contains array of > > > > > > > expected response sizes for every supported PLDM command: > > > > > > > https://github.com/changab/edk2- > > > > > > > > > platforms/blob/5af7ca1555863288bd2887ca465ad07d74b9868e/Features/ > > > > > > > > > ManageabilityPkg/Universal/PldmProtocol/Common/PldmProtocolCommon. > > > > > c#L24 > > > > > > > > > > > > > > I'm not sure that we should have this, since we don't need to know > the > > > > > > > MCTP response size apriori. > > > > > > > This only limits allowed PLDM commands to the supported array: > > > > > > > https://github.com/changab/edk2- > > > > > > > > > platforms/blob/5af7ca1555863288bd2887ca465ad07d74b9868e/Features/ > > > > > > > > > ManageabilityPkg/Universal/PldmProtocol/Common/PldmProtocolCommon. > > > > > c#L261 > > > > > > > > > > > > > > This means that right now I can't execute my simple 'GetPLDMTypes' > > > > > > > command through the 'PldmSubmit' protocol function. > > > > > > > > > > > > > > Best regards, > > > > > > > Konstantin Aladyshev > > > > > > > > > > > > > > On Thu, Oct 5, 2023 at 12:55 PM Konstantin Aladyshev > > > > > > > <aladyshe...@gmail.com> wrote: > > > > > > > > > > > > > > > > Shouldn't we update the PLDM protocol's 'PldmSubmit' function > to > > > > > > > > receive 'MctpSrcEID'/'MctpDestEID' as incoming parameters? Or > > > maybe > > > > > > > > add some 'PldmInit' function to set those parameters for further > > > PLDM > > > > > > > > communication? > > > > > > > > Because right now the MCTP EIDs are fixed to PCDs with no > flexibility > > > > > > > > https://github.com/tianocore/edk2- > > > > > > > > > platforms/blob/d6e36a151ff8365cdc55a6914cc5e6138d5788dc/Features/ > > > > > > > > > ManageabilityPkg/Universal/PldmProtocol/Common/PldmProtocolCommon. > > > > > c#L121 > > > > > > > > > > > > > > > > Best regards, > > > > > > > > Konstantin Aladyshev > > > > > > > > > > > > > > > > On Thu, Oct 5, 2023 at 7:03 AM Chang, Abner > > > > > <abner.ch...@amd.com> wrote: > > > > > > > > > > > > > > > > > > [AMD Official Use Only - General] > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > > > > > From: disc...@edk2.groups.io <disc...@edk2.groups.io> On > > > Behalf > > > > > Of > > > > > > > > > > Konstantin Aladyshev via groups.io > > > > > > > > > > Sent: Thursday, October 5, 2023 1:57 AM > > > > > > > > > > To: Chang, Abner <abner.ch...@amd.com> > > > > > > > > > > Cc: devel@edk2.groups.io; disc...@edk2.groups.io > > > > > > > > > > Subject: Re: [edk2-devel] [edk2-discuss] PLDM messages via > > > MCTP > > > > > over KCS > > > > > > > > > > > > > > > > > > > > Caution: This message originated from an External Source. > > > > > > > > > > Use > > > proper > > > > > caution > > > > > > > > > > when opening attachments, clicking links, or responding. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > That is great, and I'm surprised there are some build > > > > > > > > > > > errors at > > > your > > > > > end. > > > > > > > > > > > > > > > > > > > > I'm surprised your compiler didn't catch that since it is > > > > > > > > > > all basic > > > > > > > > > > syntax errors. > > > > > > > > > > I've used your https://github.com/changab/edk2- > > > > > > > > > > platforms/tree/MCTP_OVER_KCS_UPDATE > > > > > > > > > > directly. > > > > > > > > > > > > > > > > > > Ah I know why, I forget to rebuild the changes of both PEC and > > > MCTP > > > > > EID after I verifying the functionality of IPMI on the new > KbcCommonLib.c. > > > > > Yes, I do see the build error now and was fixed at my end. My fault. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > How do you think we just send it to the mailing list for > > > > > > > > > > > review > > > and > > > > > keep > > > > > > > > > > working on other problems based on it.? > > > > > > > > > > > Could you please send the patches out, with you as the > author > > > and > > > > > I'm the > > > > > > > > > > coauthor? I will review it again on dev mailing list. > > > > > > > > > > > > > > > > > > > > No problem, I can send a patch to the 'edk2-devel' mailing > > > > > > > > > > list. > > > > > > > > > > But before that I think I'll write a test app to check if > > > > > > > > > > PLDM > > > > > > > > > > protocols work correctly. > > > > > > > > > Ok. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Also earlier I've pointed to a fact that > > > > > > > > > > 'MctpSourceEndpointId' > and > > > > > > > > > > 'MctpDestinationEndpointId' aren't actually used in the > > > > > > > > > > 'MctpSubmitMessage' function. > > > > > > > > > > EIDs are always taken from the PCDs: > > > > > > > > > > https://github.com/changab/edk2- > > > > > > > > > > > > > > > > > > > platforms/blob/1c8d0d3fa403b47a34667f7f690add7822163111/Features/ > > > > > > > > > > > > > > > > > > > ManageabilityPkg/Universal/MctpProtocol/Common/MctpProtocolCommon. > > > > > > > > > > c#L178 > > > > > > > > > > What can we do about that? > > > > > > > > > Ah yes, we should update the algorithm, it is done here: > > > > > https://github.com/changab/edk2- > > > > > platforms/tree/MCTP_OVER_KCS_UPDATE. You have to update your > code > > > > > here: > > > > > > > > > https://github.com/Kostr/PLDM/blob/master/PldmMessage/PldmMessage.c > > > > > > > > > And we also need the fix the typo on edk2, > > > > > https://github.com/changab/edk2/tree/MCTP_OVER_KCS_UPDATE > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Btw, how long do you think I would take to merge your > changes > > > on > > > > > > > > > > openBMC? > > > > > > > > > > > > > > > > > > > > So as I've described in the > > > > > https://github.com/Kostr/PLDM/tree/master > > > > > > > > > > there are basically 2 approaches for the MCTP stack in > OpenBMC: > > > > > > > > > > (1) userspace approach (legacy, shouldn't be really used > > > > > > > > > > now) > > > > > > > > > > (2) kernel approach > > > > > > > > > > > > > > > > > > > > It is hard to tell if OpenBMC patches for the (1) approach > > > > > > > > > > will be > > > > > > > > > > merged. Since I've developed the Linux kernel driver (2) > > > > > > > > > > nobody > > > really > > > > > > > > > > cares about (1). > > > > > > > > > > > > > > > > > > > > For the (2) there are a couple of OpenBMC patches which I've > > > helped > > > > > to > > > > > > > > > > develop, but I'm just a coathor in them. So it is hard for > > > > > > > > > > me to > tell > > > > > > > > > > when they would be merged. For me it looks like they are > mostly > > > > > ready: > > > > > > > > > > 66591: transport: af-mctp: Add > pldm_transport_af_mctp_bind() | > > > > > > > > > > https://gerrit.openbmc.org/c/openbmc/libpldm/+/66591 > > > > > > > > > > 63652: pldm: Convert to using libpldm transport APIs | > > > > > > > > > > https://gerrit.openbmc.org/c/openbmc/pldm/+/63652 > > > > > > > > > > > > > > > > > > > > For the (2) I also need to push the mctp Linux kernel driver > > > upstream. > > > > > > > > > > Linux kernel development is not what I do every day, so I'm > > > > > > > > > > not > > > sure > > > > > > > > > > how long it would take. But I'm pretty determined to finish > > > > > > > > > > the > > > work > > > > > > > > > > and push my driver upstream. Currently there are some > questions > > > > > > > > > > regarding Linux KCS subsystem, so along with the KCS > subsystem > > > > > creator > > > > > > > > > > we have to figure out how to rewrite the subsystem > > > > > > > > > > correctly. > So > > > this > > > > > > > > > > can take some time. > > > > > > > > > > After the code is pushed to the torvalds/linux, it would be > picked > > > up > > > > > > > > > > by the openbmc/linux automatically. > > > > > > > > > Ok, I got it. Thanks for the detailed information. > > > > > > > > > > > > > > > > > > Regards, > > > > > > > > > Abner > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Best regards, > > > > > > > > > > Konstantin Aladyshev > > > > > > > > > > > > > > > > > > > > On Wed, Oct 4, 2023 at 7:12 PM Chang, Abner > > > > > <abner.ch...@amd.com> > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > [AMD Official Use Only - General] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > That is great, and I'm surprised there are some build > > > > > > > > > > > errors at > > > your > > > > > end. > > > > > > > > > > > How do you think we just send it to the mailing list for > > > > > > > > > > > review > > > and > > > > > keep > > > > > > > > > > working on other problems based on it.? > > > > > > > > > > > Could you please send the patches out, with you as the > author > > > and > > > > > I'm the > > > > > > > > > > coauthor? I will review it again on dev mailing list. > > > > > > > > > > > > > > > > > > > > > > I will take a look on kernal change. Btw, how long do you > > > > > > > > > > > think > I > > > > > would take > > > > > > > > > > to merge your changes on openBMC? > > > > > > > > > > > > > > > > > > > > > > Thanks > > > > > > > > > > > Abner > > > > > > > > > > > > > > > > > > > > > > Get Outlook for Android > > > > > > > > > > > > > > > > > > > > > > ________________________________ > > > > > > > > > > > From: Konstantin Aladyshev <aladyshe...@gmail.com> > > > > > > > > > > > Sent: Wednesday, October 4, 2023 11:59:16 PM > > > > > > > > > > > To: Chang, Abner <abner.ch...@amd.com> > > > > > > > > > > > Cc: devel@edk2.groups.io <devel@edk2.groups.io>; > > > > > > > > > > disc...@edk2.groups.io <disc...@edk2.groups.io> > > > > > > > > > > > Subject: Re: [edk2-devel] [edk2-discuss] PLDM messages via > > > MCTP > > > > > over KCS > > > > > > > > > > > > > > > > > > > > > > Caution: This message originated from an External Source. > Use > > > > > proper > > > > > > > > > > caution when opening attachments, clicking links, or > responding. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi Chang! > > > > > > > > > > > > > > > > > > > > > > Thanks! > > > > > > > > > > > There were a couple of trivial compilation errors, but > > > > > > > > > > > after I've > > > > > > > > > > > fixed them everything seems to work fine! > > > > > > > > > > > Just in case I've tested the OpenBMC side with the mctp > > > > > > > > > > > Linux > > > kernel > > > > > > > > > > > driver approach > > > > > > > > > > > (https://github.com/Kostr/PLDM/tree/master/mctp-kernel) > > > > > > > > > > > The latest kernel patches can be found here: > > > > > > > > > > > https://lore.kernel.org/lkml/20231003131505.337-1- > > > > > > > > > > aladyshe...@gmail.com/ > > > > > > > > > > > > > > > > > > > > > > Here is a fix for the build errors that I've found: > > > > > > > > > > > ``` > > > > > > > > > > > diff --git > > > > > > > > > > > > > > > > > > > a/Features/ManageabilityPkg/Universal/MctpProtocol/Common/MctpProtoc > > > > > > > > > > olCommon.c > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > b/Features/ManageabilityPkg/Universal/MctpProtocol/Common/MctpProto > > > > > > > > > > colCommon.c > > > > > > > > > > > index 79501d27aa..345c6da81a 100644 > > > > > > > > > > > --- > > > > > > > > > > > > > > > > > > > a/Features/ManageabilityPkg/Universal/MctpProtocol/Common/MctpProtoc > > > > > > > > > > olCommon.c > > > > > > > > > > > +++ > > > > > > > > > > > > > > > > > > > b/Features/ManageabilityPkg/Universal/MctpProtocol/Common/MctpProto > > > > > > > > > > colCommon.c > > > > > > > > > > > @@ -193,7 +193,7 @@ SetupMctpRequestTransportPacket ( > > > > > > > > > > > > > > > > > > > > > > // > > > > > > > > > > > // Generate PEC follow SMBUS 2.0 specification. > > > > > > > > > > > - *MctpKcsTrailer->Pec = > > > > > > > > > > > HelperManageabilityGenerateCrc8 > > > > > > > > > > > (MCTP_KCS_PACKET_ERROR_CODE_POLY, 0, ThisPackage, > > > > > > > > > > > MctpKcsHeader->ByteCount); > > > > > > > > > > > + MctpKcsTrailer->Pec = HelperManageabilityGenerateCrc8 > > > > > > > > > > > (MCTP_KCS_PACKET_ERROR_CODE_POLY, 0, ThisPackage, > > > > > > > > > > > MctpKcsHeader->ByteCount); > > > > > > > > > > > *PacketBody = (UINT8 *)ThisPackage; > > > > > > > > > > > *PacketBodySize = MctpKcsHeader->ByteCount; > > > > > > > > > > > *PacketTrailer = > > > > > > > > > > (MANAGEABILITY_TRANSPORT_TRAILER)MctpKcsTrailer; > > > > > > > > > > > diff --git > > > > > > > > > > > > > > > > > > > a/Features/ManageabilityPkg/Universal/MctpProtocol/Dxe/MctpProtocol.c > > > > > > > > > > > > > > > > > > > > b/Features/ManageabilityPkg/Universal/MctpProtocol/Dxe/MctpProtocol.c > > > > > > > > > > > index 863b8d471c..247d032b9b 100644 > > > > > > > > > > > --- > > > > > > > > > > > > > > > > > > > a/Features/ManageabilityPkg/Universal/MctpProtocol/Dxe/MctpProtocol.c > > > > > > > > > > > +++ > > > > > > > > > > > > > > > > > > > b/Features/ManageabilityPkg/Universal/MctpProtocol/Dxe/MctpProtocol.c > > > > > > > > > > > @@ -79,17 +79,17 @@ MctpSubmitMessage ( > > > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > > > // > > > > > > > > > > > - // Chec source EID and destination EDI. > > > > > > > > > > > + // Check source EID and destination EID > > > > > > > > > > > // > > > > > > > > > > > if ((MctpSourceEndpointId >= > > > > > MCTP_RESERVED_ENDPOINT_START_ID) && > > > > > > > > > > > - MctpSourceEndpointId <= > > > > > MCTP_RESERVED_ENDPOINT_END_ID) > > > > > > > > > > > + (MctpSourceEndpointId <= > > > > > MCTP_RESERVED_ENDPOINT_END_ID) > > > > > > > > > > > ) { > > > > > > > > > > > DEBUG ((DEBUG_ERROR, "%a: The value of MCTP source > EID > > > (%x) > > > > > is > > > > > > > > > > > reserved.\n", func, MctpSourceEndpointId)); > > > > > > > > > > > return EFI_INVALID_PARAMETER; > > > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > > > if ((MctpDestinationEndpointId >= > > > > > > > > > > MCTP_RESERVED_ENDPOINT_START_ID) && > > > > > > > > > > > - MctpDestinationEndpointId <= > > > > > MCTP_RESERVED_ENDPOINT_END_ID) > > > > > > > > > > > + (MctpDestinationEndpointId <= > > > > > MCTP_RESERVED_ENDPOINT_END_ID) > > > > > > > > > > > ) { > > > > > > > > > > > DEBUG ((DEBUG_ERROR, "%a: The value of MCTP > destination > > > EID > > > > > (%x) > > > > > > > > > > > is reserved.\n", func, MctpDestinationEndpointId)); > > > > > > > > > > > return EFI_INVALID_PARAMETER; > > > > > > > > > > > ``` > > > > > > > > > > > > > > > > > > > > > > Best regards, > > > > > > > > > > > Konstantin Aladyshev > > > > > > > > > > > > > > > > > > > > > > On Wed, Oct 4, 2023 at 2:52 PM Chang, Abner > > > > > <abner.ch...@amd.com> > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > [AMD Official Use Only - General] > > > > > > > > > > > > > > > > > > > > > > > > Hi Aladyshev, > > > > > > > > > > > > I have updated the change you made and put those code on > > > below > > > > > link, > > > > > > > > > > > > https://github.com/changab/edk2- > > > > > > > > > > > > > > > platforms/commit/1c8d0d3fa403b47a34667f7f690add7822163111 > > > > > > > > > > > > > > > > > > > > > > > > I combined MCTP over KCS changes and IPMI over KCS > > > > > functionality in > > > > > > > > > > KcsCommonLib.c. I also created > > > > > MANAGEABILITY_MCTP_KCS_TRAILER as you > > > > > > > > > > suggested. The source EID and destination EID are checked in > > > > > > > > > > MctpSubmitCommand as well. IPMI/KCS functionality is > verified > > > and > > > > > works > > > > > > > > > > fine after this change. > > > > > > > > > > > > As I am no able to use the corresponding change you made > on > > > > > OpenBMC > > > > > > > > > > site at my end, could you please help to verify my updates > > > > > > > > > > on > your > > > > > machine? > > > > > > > > > > Let's see how it works. > > > > > > > > > > > > I also consider to migrate the code that generates MCTP > over > > > KCS > > > > > > > > > > header/trailer from MctpProtocolCommon.c to > KcsCommonLib.c, > > > > > maybe after > > > > > > > > > > we verifying PLDM->MCTP->KCS route works well on > > > > > ManageabilityPkg. > > > > > > > > > > > > > > > > > > > > > > > > Thank you > > > > > > > > > > > > Abner > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > > > > > > > > From: Konstantin Aladyshev <aladyshe...@gmail.com> > > > > > > > > > > > > > Sent: Friday, September 29, 2023 2:18 AM > > > > > > > > > > > > > To: Chang, Abner <abner.ch...@amd.com> > > > > > > > > > > > > > Cc: devel@edk2.groups.io; disc...@edk2.groups.io > > > > > > > > > > > > > Subject: Re: [edk2-devel] [edk2-discuss] PLDM messages > via > > > > > MCTP over > > > > > > > > > > KCS > > > > > > > > > > > > > > > > > > > > > > > > > > Caution: This message originated from an External > > > > > > > > > > > > > Source. > > > Use > > > > > proper > > > > > > > > > > caution > > > > > > > > > > > > > when opening attachments, clicking links, or > > > > > > > > > > > > > responding. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi, Chang! > > > > > > > > > > > > > > > > > > > > > > > > > > Did you have time to test libmctp MCTP KCS binding > solution? > > > > > > > > > > > > > > > > > > > > > > > > > > Here are some updates from my end. As I was saying, I > was > > > > > working on > > > > > > > > > > > > > the Linux kernel binding solution. > > > > > > > > > > > > > And now I've finished the initial implementation of > > > > > > > > > > > > > the > Linux > > > > > kernel > > > > > > > > > > > > > binding driver for the MCTP-over-KCS binding and > proposed > > > all > > > > > the > > > > > > > > > > > > > patches upstream > > > > > > > > > > > > > > (https://www.spinics.net/lists/kernel/msg4949173.html). > > > > > > > > > > > > > I've also updated instructions in my repo > > > > > > > > > > > > > https://github.com/Kostr/PLDM (the guide for the > > > > > > > > > > > > > kernel > > > > > binding > > > > > > > > > > > > > solution and all the necessary Linux kernel patches > > > > > > > > > > > > > can be > > > found > > > > > here > > > > > > > > > > > > > https://github.com/Kostr/PLDM/tree/master/mctp- > kernel). > > > > > > > > > > > > > So now you can use Linux driver instead of the libmctp > utility > > > on > > > > > the BMC > > > > > > > > > > side. > > > > > > > > > > > > > > > > > > > > > > > > > > Couple of things that I've noticed in the development > > > process: > > > > > > > > > > > > > - `MctpSubmitCommand` receives > > > > > > > > > > > > > 'MctpSourceEndpointId'/'MctpDestinationEndpointId' as > > > > > arguments. But > > > > > > > > > > > > > these values aren't actually used. The current code > > > > > > > > > > > > > just > uses > > > EIDs > > > > > > > > > > > > > that were set via PCDs > > > > > > > > > > > > > (https://github.com/tianocore/edk2- > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > platforms/blob/d03a60523a6086d200d3eb1e2f25530bf1cb790e/Features/ > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ManageabilityPkg/Universal/MctpProtocol/Common/MctpProtocolCommon. > > > > > > > > > > > > > c#L178) > > > > > > > > > > > > > - According to the specification DSP0236 (section 8.2) > MCTP > > > EID > > > > > 0 to 7 > > > > > > > > > > > > > are reserved. It is critical that we do not use them > > > > > > > > > > > > > since > MCTP > > > > > Linux > > > > > > > > > > > > > kernel subsystem checks that part. So we probably need > to > > > add > > > > > some > > > > > > > > > > > > > check to the `MctpSubmitCommand` that would verify > that > > > we > > > > > don't use > > > > > > > > > > > > > reserved EIDs. > > > > > > > > > > > > > > > > > > > > > > > > > > Best regards, > > > > > > > > > > > > > Konstantin Aladyshev > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Sep 21, 2023 at 5:32 AM Chang, Abner > > > > > > > > > > <abner.ch...@amd.com> > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > [AMD Official Use Only - General] > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi Aladyshev, > > > > > > > > > > > > > > Thanks for providing the details, I will take a > > > > > > > > > > > > > > look at your > > > code > > > > > first, > > > > > > > > > > > > > implement it at my end and then response to your > question. > > > > > > > > > > > > > > > > > > > > > > > > > > > > Abner > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > > > > > > > > > > From: Konstantin Aladyshev > <aladyshe...@gmail.com> > > > > > > > > > > > > > > > Sent: Friday, September 8, 2023 8:57 PM > > > > > > > > > > > > > > > To: Chang, Abner <abner.ch...@amd.com> > > > > > > > > > > > > > > > Cc: devel@edk2.groups.io; disc...@edk2.groups.io > > > > > > > > > > > > > > > Subject: Re: [edk2-devel] [edk2-discuss] PLDM > messages > > > via > > > > > MCTP > > > > > > > > > > over > > > > > > > > > > > > > KCS > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Caution: This message originated from an External > Source. > > > > > Use proper > > > > > > > > > > > > > caution > > > > > > > > > > > > > > > when opening attachments, clicking links, or > responding. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi, Chang! > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I've finished my initial implementation of the > > > > > > > > > > > > > > > MCTP > over > > > KCS > > > > > binding. > > > > > > > > > > > > > > > You can find 'edk2-platform' patches and 'openbmc' > > > patches > > > > > along > > > > > > > > > > with > > > > > > > > > > > > > > > all of the instructions in my repository > > > > > > > > > > > > > > > https://github.com/Kostr/PLDM. I hope you'll be > > > > > > > > > > > > > > > able > to > > > > > reproduce > > > > > > > > > > > > > > > everything on your hardware configuration. Feel > > > > > > > > > > > > > > > free > to > > > ask > > > > > any > > > > > > > > > > > > > > > questions. > > > > > > > > > > > > > > > Also I've sent all the openbmc patches upstream, > > > > > > > > > > > > > > > hope > > > they > > > > > will get > > > > > > > > > > > > > > > accepted soon. > > > > > > > > > > > > > > > As for the 'edk2-platform' patches, right now I > > > > > > > > > > > > > > > don't > fully > > > > > understand > > > > > > > > > > > > > > > how to write them correctly to keep IPMI over KCS > stack > > > > > working. I > > > > > > > > > > > > > > > think here I would need your help. Right now I've > > > commited > > > > > them to > > > > > > > > > > my > > > > > > > > > > > > > > > `edk2-platforms` fork > > > > > > > > > > > > > > > https://github.com/tianocore/edk2- > > > > > > > > > > > > > > > > > > > > platforms/commit/99a6c98a63b37f955c0d0480149b84fcc3a03f74 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Couple of questions/notices: > > > > > > > > > > > > > > > 1) You've said that we can differentiate MCTP by > > > > > > > > > > > > > > > the > > > transfer > > > > > token, > > > > > > > > > > > > > > > but it is not passed to the > 'KcsTransportSendCommand' > > > > > function > > > > > > > > > > > > > > > https://github.com/tianocore/edk2- > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > platforms/blob/bb6841e3fd1c60b3f8510b4fc0a380784e05d326/Features/ > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ManageabilityPkg/Library/ManageabilityTransportKcsLib/Common/KcsComm > > > > > > > > > > > > > > > on.c#L414 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 2) What function should know about the > > > > > > > > > > > > > > > MANAGEABILITY_MCTP_KCS_HEADER? > > > > > > > > > > > > > > > Keep in mind that this header includes > > > > > > > > > > > > > > > 'ByteCount' for > the > > > > > incoming > > > > > > > > > > > > > > > data size that we need to read. > > > > > > > > > > > > > > > - KcsTransportSendCommand or > > > > > CommonMctpSubmitMessage ? > > > > > > > > > > > > > > > (https://github.com/tianocore/edk2- > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > platforms/blob/master/Features/ManageabilityPkg/Library/ManageabilityTra > > > > > > > > > > > > > > > nsportKcsLib/Common/KcsCommon.c) > > > > > > > > > > > > > > > (https://github.com/tianocore/edk2- > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > platforms/blob/master/Features/ManageabilityPkg/Universal/MctpProtocol/ > > > > > > > > > > > > > > > Common/MctpProtocolCommon.c)? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 3) As I've said earlier I think it would be good > > > > > > > > > > > > > > > to add > > > > > > > > > > > > > > > MANAGEABILITY_MCTP_KCS_TRAILER to the Mctp.h > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 4) Not sure if it is a good idea to pass these > > > > > > > > > > > > > > > parameters > to > > > the > > > > > > > > > > > > > > > MctpSubmitCommand protocol function: > > > > > > > > > > > > > > > ``` > > > > > > > > > > > > > > > UINT8 MctpType, > > > > > > > > > > > > > > > BOOLEAN RequestDataIntegrityCheck, > > > > > > > > > > > > > > > ``` > > > > > > > > > > > > > > > (https://github.com/tianocore/edk2- > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > platforms/blob/master/Features/ManageabilityPkg/Include/Protocol/MctpPr > > > > > > > > > > > > > > > otocol.h) > > > > > > > > > > > > > > > Shouldn't it be in the `RequestData` directly > > > > > > > > > > > > > > > since it is > more > > > of > > > > > a > > > > > > > > > > > > > > > payload than a header for the MCTP? I don't know > > > > > > > > > > > > > > > the > > > > > specification > > > > > > > > > > > > > > > very well, but what if the > > > > > > > > > > > > > > > RequestDataIntegrityCheck > > > would > > > > > be set in > > > > > > > > > > > > > > > the response? Who would need to check the > > > > > > > > > > > > > > > integrity > of > > > the > > > > > payload > > > > > > > > > > > > > > > buffer in that case? MCTP library or the code > > > > > > > > > > > > > > > calling the > > > MCTP > > > > > > > > > > > > > > > library? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 5) Haven't tested the PldmProtocol, maybe it also > needs > > > > > some > > > > > > > > > > corrections. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Feel free to ask any questions about my solution. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Right now I'll probably focus on the Linux kernel > > > > > > > > > > > > > > > driver > for > > > the > > > > > MCTP > > > > > > > > > > > > > > > over KCS binding. So if you want to finish edk2- > platforms > > > > > code based > > > > > > > > > > > > > > > on my patches, feel free to do it. If not, I'll > > > > > > > > > > > > > > > try to get > back > > > to it > > > > > > > > > > > > > > > after I finish the Linux kernel driver. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Best regards, > > > > > > > > > > > > > > > Konstantin Aladyshev > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Fri, Sep 1, 2023 at 8:58 AM Chang, Abner > > > > > > > > > > <abner.ch...@amd.com> > > > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > [AMD Official Use Only - General] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > See my answer below, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > > > > > > > > > > > > From: devel@edk2.groups.io > <devel@edk2.groups.io> > > > On > > > > > Behalf > > > > > > > > > > Of > > > > > > > > > > > > > > > > > Konstantin Aladyshev via groups.io > > > > > > > > > > > > > > > > > Sent: Friday, September 1, 2023 12:02 AM > > > > > > > > > > > > > > > > > To: Chang, Abner <abner.ch...@amd.com> > > > > > > > > > > > > > > > > > Cc: devel@edk2.groups.io; > disc...@edk2.groups.io > > > > > > > > > > > > > > > > > Subject: Re: [edk2-devel] [edk2-discuss] PLDM > > > messages > > > > > via > > > > > > > > > > MCTP > > > > > > > > > > > > > over > > > > > > > > > > > > > > > KCS > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Caution: This message originated from an > > > > > > > > > > > > > > > > > External > > > Source. > > > > > Use > > > > > > > > > > proper > > > > > > > > > > > > > > > caution > > > > > > > > > > > > > > > > > when opening attachments, clicking links, or > > > responding. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > As I've said there is nothing like "KCS > > > > > > > > > > > > > > > > > completion > code" > > > in > > > > > the > > > > > > > > > > MCTP > > > > > > > > > > > > > > > > > over KCS binding specification > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > (https://www.dmtf.org/sites/default/files/standards/documents/DSP0254_1 > > > > > > > > > > > > > > > > > .0.0.pdf). > > > > > > > > > > > > > > > > > The response packet should have the same > structure as > > > a > > > > > request. > > > > > > > > > > I.e. > > > > > > > > > > > > > > > > > a packet with > MANAGEABILITY_MCTP_KCS_HEADER > > > and > > > > > PEC. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Currently I'm writing "MCTP over KCS" binding > > > > > > > > > > > > > > > > > for > the > > > > > OpenBMC > > > > > > > > > > > > > libmctp > > > > > > > > > > > > > > > > > project. So I can send whatever I want, I > > > > > > > > > > > > > > > > > don't think > > > my > > > > > output > > > > > > > > > > would > > > > > > > > > > > > > > > > > be any useful to you. But I've asked this > > > > > > > > > > > > > > > > > question in > the > > > > > > > > > > community > > > > > > > > > > > > > > > > > and they also confirmed that the response > > > > > > > > > > > > > > > > > packet > has > > > the > > > > > same > > > > > > > > > > > > > > > > > structure. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > (https://discord.com/channels/775381525260664832/7787906385638850 > > > > > > > > > > > > > > > > > 86/1146782595334549554) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Now I'm a little bit confused about the > > > > > > > > > > `KcsTransportSendCommand` > > > > > > > > > > > > > > > > > function. It has the following arguments for > > > > > > > > > > > > > > > > > the > > > function > > > > > output: > > > > > > > > > > > > > > > > > ``` > > > > > > > > > > > > > > > > > OUT UINT8 > > > > > > > > > > > > > > > > > *ResponseData > > > OPTIONAL, > > > > > > > > > > > > > > > > > IN OUT UINT32 > > > > > > > > > > > > > > > > > *ResponseDataSize > > > > > OPTIONAL > > > > > > > > > > > > > > > > > ``` > > > > > > > > > > > > > > > > > Should we include > > > > > > > > > > > > > MCTP_TRANSPORT_HEADER/MCTP_MESSAGE_HEADER > > > > > > > > > > > > > > > to > > > > > > > > > > > > > > > > > this > > > > > > > > > > > > > > > > > output or not? > > > > > > > > > > > > > > > > If the MCTP KCS packet for host->BMC and BMC- > >host > > > are > > > > > in the > > > > > > > > > > same > > > > > > > > > > > > > > > structure, then yes, the response data from BMC > should > > > > > includes > > > > > > > > > > > > > > > > MCTP_TRANSPORT_HEADER/MCTP_MESSAGE_HEADER > > > in > > > > > my > > > > > > > > > > opinion, as > > > > > > > > > > > > > this > > > > > > > > > > > > > > > is defined in MCTP base protocol. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > So let me explain the implementation for MCTP > > > > > > > > > > > > > > > > over > KCS > > > > > and what > > > > > > > > > > do we > > > > > > > > > > > > > > > miss now. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > A. MCTP protocol driver linked with KCS > > > > > > > > > > > > > > > > Transport > > > interface > > > > > library > > > > > > > > > > > > > > > > - In MCTP protocol driver, if the transport > > > > > > > > > > > > > > > > interface > is > > > KCS > > > > > then > > > > > > > > > > > > > > > > 1. MCTP protocol driver builds up the > > > > > > > > > > > > > > > > MCTP KCS > > > > > transport > > > > > > > > > > header, > > > > > > > > > > > > > which > > > > > > > > > > > > > > > is DefBody, NetFunc and ByeCount > > > > > > > > > > > > > > > > 2. MCTP protocol driver builds up the > > > > > > > > > > > > > > > > MCTP > payload > > > > > > > > > > > > > > > > 3. MCTP protocol driver builds up the > > > > > > > > > > > > > > > > MCTP KCS > > > > > transport trailer, > > > > > > > > > > > > > which > > > > > > > > > > > > > > > is PEC. > > > > > > > > > > > > > > > > Above three steps are already > > > > > > > > > > > > > > > > implemented. > > > > > > > > > > > > > > > > PEC is calculated by MCTP protocol > > > > > > > > > > > > > > > > driver and > should > > > be > > > > > verified > > > > > > > > > > by > > > > > > > > > > > > > KCS > > > > > > > > > > > > > > > using the same algorithm in my understanding of > > > > > > > > > > > > > > > spec. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > B. In KCS Transport interface library > > > > > > > > > > > > > > > > 1. KCS Transport interface library sends > > > > > > > > > > > > > > > > the > transport > > > > > header got > > > > > > > > > > from > > > > > > > > > > > > > > > TransportToken. Same behavior for IPMI protocol, > > > > > > > > > > > > > > > but > > > > > different > > > > > > > > > > content. > > > > > > > > > > > > > KCS > > > > > > > > > > > > > > > Transport interface library doesn't have to > > > > > > > > > > > > > > > understand > > > this. > > > > > > > > > > > > > > > > 2. KCS Transport interface library sends > > > > > > > > > > > > > > > > the > payload > > > > > > > > > > > > > > > > 3. KCS Transport interface library sends > > > > > > > > > > > > > > > > the > transport > > > > > trailer got > > > > > > > > > > from > > > > > > > > > > > > > > > TransportToken. Same behavior for IPMI protocol, > > > > > > > > > > > > > > > but > > > > > different > > > > > > > > > > content. > > > > > > > > > > > > > KCS > > > > > > > > > > > > > > > Transport interface library doesn't have to > > > > > > > > > > > > > > > understand > > > this. > > > > > > > > > > > > > > > > Above three steps are already implemented. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Then, if Manageability protocol is MCTP, > > > > > > > > > > > > > > > > we skip > > > reading > > > > > > > > > > responses > > > > > > > > > > > > > > > header (Not implemented) > > > > > > > > > > > > > > > > For reading response data > > > > > > > > > > > > > > > > 1. If the ResponseData and > > > > > > > > > > > > > > > > ResponseSize is valid > in > > > the > > > > > given > > > > > > > > > > > > > > > TransportToken, then we read ResponseSize data > > > > > > > > > > > > > > > from > > > KCS. > > > > > (Already > > > > > > > > > > > > > > > implemented) > > > > > > > > > > > > > > > > 2. if Manageability protocol is MCTP, > > > > > > > > > > > > > > > > then we > skip > > > > > reading > > > > > > > > > > responses > > > > > > > > > > > > > > > header again (Not implemented) > > > > > > > > > > > > > > > > Now the response is returned to MCTP > > > > > > > > > > > > > > > > protocol > driver > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > C. In MCTP protocol driver, we expect to get > > > > > > > > > > > > > > > > the > whole > > > > > MCTP over > > > > > > > > > > KCS > > > > > > > > > > > > > > > packet response, that includes DefBody, NetFunc > > > > > > > > > > > > > > > and > > > > > ByeCount, > > > > > > > > > > MCTP > > > > > > > > > > > > > > > message and PEC. > > > > > > > > > > > > > > > > 1. MCTP protocol driver verifies the > > > > > > > > > > > > > > > > returned > PEC > > > with > > > > > the > > > > > > > > > > payload. > > > > > > > > > > > > > > > > 2. Strip out DefBody, NetFunc, > > > > > > > > > > > > > > > > ByeCount and > PEC > > > and > > > > > then > > > > > > > > > > returns it > > > > > > > > > > > > > to > > > > > > > > > > > > > > > upper layer (e.g., MCTP transport interface > > > > > > > > > > > > > > > library). > > > Returns > > > > > only > > > > > > > > > > MCTP > > > > > > > > > > > > > > > Transport header and MCTP packet payload as it > > > > > > > > > > > > > > > shows > in > > > > > MCTP base > > > > > > > > > > > > > protocol > > > > > > > > > > > > > > > spec. > > > > > > > > > > > > > > > > Above is not implemented > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > D. In MCTP transport interface library, we can > > > > > > > > > > > > > > > > strip > out > > > > > MCTP > > > > > > > > > > transport > > > > > > > > > > > > > > > header and then return it to upper layer (e.g., > > > > > > > > > > > > > > > PLDM > > > protocol > > > > > driver). > > > > > > > > > > > > > > > > Above is not implemented. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > E. In PLDM protocol driver, > > > > > > > > > > > > > > > > 1. we verify the Message Integrity > > > > > > > > > > > > > > > > Check if the > > > Message > > > > > Type > > > > > > > > > > > > > requests it. > > > > > > > > > > > > > > > > 2. we can remove MCTP message type then > return it > > > to > > > > > upper > > > > > > > > > > layer > > > > > > > > > > > > > (e.g., > > > > > > > > > > > > > > > PLDM SMBIOS transfer) > > > > > > > > > > > > > > > > Above is not implemented. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > We didn’t implement BMC->Host in step C, D and E > as > > > our > > > > > current > > > > > > > > > > > > > demand is > > > > > > > > > > > > > > > to send the SMBIOS table to BMC, which doesn't > require > > > the > > > > > response > > > > > > > > > > data > > > > > > > > > > > > > if I > > > > > > > > > > > > > > > am not wrong. > > > > > > > > > > > > > > > > Let me know if it is problematic in the above > > > > > > > > > > > > > > > > process. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks and regards, > > > > > > > > > > > > > > > > Abner > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Best regards, > > > > > > > > > > > > > > > > > Konstantin Aladyshev > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Aug 31, 2023 at 6:52 PM Chang, Abner > > > > > > > > > > > > > > > <abner.ch...@amd.com> > > > > > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > [AMD Official Use Only - General] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > But wait, wee my another comment below, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > > > > > > > > > > > > > > From: Chang, Abner > > > > > > > > > > > > > > > > > > > Sent: Thursday, August 31, 2023 11:42 PM > > > > > > > > > > > > > > > > > > > To: devel@edk2.groups.io; > > > aladyshe...@gmail.com > > > > > > > > > > > > > > > > > > > Cc: disc...@edk2.groups.io > > > > > > > > > > > > > > > > > > > Subject: RE: [edk2-devel] [edk2-discuss] > > > > > > > > > > > > > > > > > > > PLDM > > > > > messages via > > > > > > > > > > MCTP > > > > > > > > > > > > > > > over > > > > > > > > > > > > > > > > > KCS > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > > > > > > > > > > > > > > > From: devel@edk2.groups.io > > > > > <devel@edk2.groups.io> On > > > > > > > > > > Behalf > > > > > > > > > > > > > Of > > > > > > > > > > > > > > > > > > > > Konstantin Aladyshev via groups.io > > > > > > > > > > > > > > > > > > > > Sent: Thursday, August 31, 2023 10:57 PM > > > > > > > > > > > > > > > > > > > > To: Chang, Abner <abner.ch...@amd.com> > > > > > > > > > > > > > > > > > > > > Cc: disc...@edk2.groups.io; > > > devel@edk2.groups.io > > > > > > > > > > > > > > > > > > > > Subject: Re: [edk2-devel] [edk2-discuss] > PLDM > > > > > messages via > > > > > > > > > > > > > MCTP > > > > > > > > > > > > > > > over > > > > > > > > > > > > > > > > > KCS > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Caution: This message originated from an > External > > > > > Source. > > > > > > > > > > Use > > > > > > > > > > > > > proper > > > > > > > > > > > > > > > > > > > caution > > > > > > > > > > > > > > > > > > > > when opening attachments, clicking > > > > > > > > > > > > > > > > > > > > links, or > > > > > responding. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > (I don see what is the response > > > > > > > > > > > > > > > > > > > > > header for > MCTP > > > > > KCS in spec > > > > > > > > > > > > > though, > > > > > > > > > > > > > > > > > does > > > > > > > > > > > > > > > > > > > it > > > > > > > > > > > > > > > > > > > > mention the KCS response?). > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > The spec doesn't explicitly mention > > > > > > > > > > > > > > > > > > > > that the > > > format of > > > > > a send > > > > > > > > > > and > > > > > > > > > > > > > > > > > > > > response packets differ. So I assume it > > > > > > > > > > > > > > > > > > > > is the > same > > > > > and it is > > > > > > > > > > > > > > > > > > > > described at the "Figure 1 – MCTP over > > > > > > > > > > > > > > > > > > > > KCS > Packet > > > > > Format" > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > (https://www.dmtf.org/sites/default/files/standards/documents/DSP0254_1 > > > > > > > > > > > > > > > > > > > > .0.0.pdf) > > > > > > > > > > > > > > > > > > > > Therefore the format of a response > > > > > > > > > > > > > > > > > > > > would look > > > like > > > > > this: > > > > > > > > > > > > > > > > > > > > ``` > > > > > > > > > > > > > > > > > > > > MANAGEABILITY_MCTP_KCS_HEADER > > > > > > > > > > > > > > > > > > > > (https://github.com/tianocore/edk2- > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > platforms/blob/master/Features/ManageabilityPkg/Include/Library/Managea > > > > > > > > > > > > > > > > > > > > bilityTransportMctpLib.h) > > > > > > > > > > > > > > > > > > > > MCTP_TRANSPORT_HEADER > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > (https://github.com/tianocore/edk2/blob/master/MdePkg/Include/Industry > > > > > > > > > > > > > > > > > > > > Standard/Mctp.h) > > > > > > > > > > > > > > > > > > > > MCTP_MESSAGE_HEADER > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > (https://github.com/tianocore/edk2/blob/master/MdePkg/Include/Industry > > > > > > > > > > > > > > > > > > > > Standard/Mctp.h) > > > > > > > > > > > > > > > > > > > > < response data> > > > > > > > > > > > > > > > > > > > What do you see the KCS response from BMC? > You > > > > > probably > > > > > > > > > > right as > > > > > > > > > > > > > > > the > > > > > > > > > > > > > > > > > > > header and trailer are labeled in > > > > > > > > > > > > > > > > > > > different colors > 😊. > > > > > Could you > > > > > > > > > > > > > please > > > > > > > > > > > > > > > > > enable > > > > > > > > > > > > > > > > > > > the debug message to capture it? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > PEC > > > > > > > > > > > > > > > > > > > > (Probably we need to define > > > > > > > > > > > > > > > > > MANAGEABILITY_MCTP_KCS_TRAILER) > > > > > > > > > > > > > > > > > > > > ``` > > > > > > > > > > > > > > > > > > > We have MANAGEABILITY_MCTP_KCS_HEADER > > > > > defined but no > > > > > > > > > > > > > > > > > > > MANAGEABILITY_MCTP_KCS_TRAILER as it is > > > > > hardcoded to one > > > > > > > > > > > > > byte. > > > > > > > > > > > > > > > > > > > If the KCS response is PEC, then yes, we > > > > > > > > > > > > > > > > > > > can > create > > > > > > > > > > > > > > > > > > > MANAGEABILITY_MCTP_KCS_TRAILER for KCS > > > > > transport > > > > > > > > > > interface. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > In the implementation, PEC is calculated in > > > > > > > > > > > > > > > > > > MCTP > > > > > protocol and > > > > > > > > > > send > > > > > > > > > > > > > > > through > > > > > > > > > > > > > > > > > KCS as the KCS packet trailer. So, when we > > > > > > > > > > > > > > > > > send the > > > MCTP > > > > > request > > > > > > > > > > > > > through > > > > > > > > > > > > > > > > > KCS, KCS shouldn't respond the PEC to upper > > > > > > > > > > > > > > > > > stack, > > > right? > > > > > I still > > > > > > > > > > think > > > > > > > > > > > > > the > > > > > > > > > > > > > > > > > response should be the KCS completion code. > > > > > > > > > > > > > > > > > The > > > debug > > > > > message > > > > > > > > > > from > > > > > > > > > > > > > > > your > > > > > > > > > > > > > > > > > end may help to clarify this as your BMC has > > > > > > > > > > > > > > > > > the > MCTP > > > > > KCS > > > > > > > > > > > > > > > implementation. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks > > > > > > > > > > > > > > > > > > Abner > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > So in the "KcsTransportSendCommand" > > > > > > > > > > > > > > > > > > > > (https://github.com/tianocore/edk2- > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > platforms/blob/14553d31c72afa7289f6a2555b6e91f4f715a05a/Features/ > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ManageabilityPkg/Library/ManageabilityTransportKcsLib/Common/KcsComm > > > > > > > > > > > > > > > > > > > > on.c#L414) > > > > > > > > > > > > > > > > > > > > we can check if we transfer is MCTP > > > > > > > > > > > > > > > > > > > > (based on > > > > > > > > > > > > > > > > > > > > "TransportToken- > > > >ManagebilityProtocolSpecification > > > > > == > > > > > > > > > > MCTP" like > > > > > > > > > > > > > > > > > > > > you've suggested) and handle response > > > accordingly. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > But which headers should we check in > > > > > > > > > > > > > > > > > > > > this > > > function? > > > > > Only > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > MANAGEABILITY_MCTP_KCS_HEADER/MANAGEABILITY_MCTP_KCS_TRAILER > > > > > > > > > > > > > > > > > > > > ? > > > > > > > > > > > > > > > > > > > Yes, only check header and trailer for > > > > > > > > > > > > > > > > > > > transport > > > > > interface. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > What about > > > > > > > > > > > > > > > > MCTP_TRANSPORT_HEADER/MCTP_MESSAGE_HEADER? > > > > > > > > > > > > > > > > > Do > > > > > > > > > > > > > > > > > > > we > > > > > > > > > > > > > > > > > > > > need to > > > > > > > > > > > > > > > > > > > > check them here as well? Or do we need > > > > > > > > > > > > > > > > > > > > to > check > > > > > them > > > > > > > > > > > > > somewhere > > > > > > > > > > > > > > > > > upper > > > > > > > > > > > > > > > > > > > > the call stack? > > > > > > > > > > > > > > > > > > > We should leave this to MCTP protocol > > > > > > > > > > > > > > > > > > > driver as > > > this is > > > > > belong > > > > > > > > > > to > > > > > > > > > > > > > > > protocol > > > > > > > > > > > > > > > > > > > layer, the upper layer stack. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks > > > > > > > > > > > > > > > > > > > Abner > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Best regards, > > > > > > > > > > > > > > > > > > > > Konstantin Aladyshev > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Aug 31, 2023 at 7:59 AM Chang, > Abner > > > > > > > > > > > > > > > > > <abner.ch...@amd.com> > > > > > > > > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > [AMD Official Use Only - General] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi Aladyshev, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > > > > > > > > > > > > > > > > > From: Konstantin Aladyshev > > > > > <aladyshe...@gmail.com> > > > > > > > > > > > > > > > > > > > > > > Sent: Wednesday, August 30, 2023 > > > > > > > > > > > > > > > > > > > > > > 11:09 > PM > > > > > > > > > > > > > > > > > > > > > > To: Chang, Abner > <abner.ch...@amd.com> > > > > > > > > > > > > > > > > > > > > > > Cc: disc...@edk2.groups.io; > > > > > devel@edk2.groups.io > > > > > > > > > > > > > > > > > > > > > > Subject: Re: [edk2-discuss] PLDM > messages > > > via > > > > > MCTP > > > > > > > > > > over KCS > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Caution: This message originated > > > > > > > > > > > > > > > > > > > > > > from an > > > External > > > > > Source. > > > > > > > > > > Use > > > > > > > > > > > > > > > proper > > > > > > > > > > > > > > > > > > > > caution > > > > > > > > > > > > > > > > > > > > > > when opening attachments, clicking > > > > > > > > > > > > > > > > > > > > > > links, > or > > > > > responding. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi! > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I've started to implement MCTP over > > > > > > > > > > > > > > > > > > > > > > KCS > > > binding > > > > > for the > > > > > > > > > > > > > libmctp > > > > > > > > > > > > > > > > > > > > > > (https://github.com/openbmc/libmctp) > and > > > test > > > > > it with > > > > > > > > > > the > > > > > > > > > > > > > > > current > > > > > > > > > > > > > > > > > code > > > > > > > > > > > > > > > > > > > > > > in the ManageabilityPkg. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I was able successfully send the > > > > > > > > > > > > > > > > > > > > > > MCTP > packet > > > to > > > > > the BMC, > > > > > > > > > > but > > > > > > > > > > > > > right > > > > > > > > > > > > > > > > > now > > > > > > > > > > > > > > > > > > > > > > I'm having some troubles with > > > > > > > > > > > > > > > > > > > > > > receiving the > > > > > answer back. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I think I've found some bug in the > > > > > > > > > > > > > `KcsTransportSendCommand` > > > > > > > > > > > > > > > code. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > After it sends data over KCS in > > > > > > > > > > > > > > > > > > > > > > expects a > > > responce > > > > > starting > > > > > > > > > > with > > > > > > > > > > > > > a > > > > > > > > > > > > > > > > > > > > > > 'IPMI_KCS_RESPONSE_HEADER' > > > > > > > > > > > > > > > > > > > > > > https://github.com/tianocore/edk2- > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > platforms/blob/14553d31c72afa7289f6a2555b6e91f4f715a05a/Features/ > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ManageabilityPkg/Library/ManageabilityTransportKcsLib/Common/KcsComm > > > > > > > > > > > > > > > > > > > > > > on.c#L476 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Isn't it wrong, assuming that the > > > > > > > > > > > > > > > > > > > > > > right > header > > > in > > > > > case of > > > > > > > > > > MCTP > > > > > > > > > > > > > > > should > > > > > > > > > > > > > > > > > > > > > > be > 'MANAGEABILITY_MCTP_KCS_HEADER' ? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I guess the > 'IpmiHelperCheckCompletionCode' > > > > > check after > > > > > > > > > > the > > > > > > > > > > > > > data > > > > > > > > > > > > > > > > > > > > > > receive is also not relevant for > > > > > > > > > > > > > > > > > > > > > > the MCTP. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > This is something I don’t really sure > > > > > > > > > > > > > > > > > > > > > as I can't > > > verify > > > > > the > > > > > > > > > > response > > > > > > > > > > > > > > > > > payload > > > > > > > > > > > > > > > > > > > > because our BMC doesn't have the code to > handle > > > > > MCTP over > > > > > > > > > > KCS > > > > > > > > > > > > > > > > > > > command. > > > > > > > > > > > > > > > > > > > > However it is appreciated if community > > > > > > > > > > > > > > > > > > > > can > help > > > to > > > > > verify this. > > > > > > > > > > As I > > > > > > > > > > > > > can > > > > > > > > > > > > > > > > > > > > remember, I can see the return KCS > > > > > > > > > > > > > > > > > > > > status is > 0xC1, > > > > > the invalid > > > > > > > > > > > > > > > command. > > > > > > > > > > > > > > > > > > > Thus I > > > > > > > > > > > > > > > > > > > > think if we do a MCTP over KCS, the > > > > > > > > > > > > > > > > > > > > first > response > > > is > > > > > still KCS > > > > > > > > > > > > > response > > > > > > > > > > > > > > > > > > > header. > > > > > > > > > > > > > > > > > > > > > This is not what do you see on the > > > > > > > > > > > > > > > > > > > > > BCM it > does > > > > > support > > > > > > > > > > MCTP > > > > > > > > > > > > > over > > > > > > > > > > > > > > > > > KCS? If > > > > > > > > > > > > > > > > > > > > so, then I would like to have your help > > > > > > > > > > > > > > > > > > > > to > correct > > > this > > > > > code. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Since > > > > > > > > > > > > > > > > > > > > > > 'ManageabilityTransportKcsLib' can > be > > > used > > > > > both for > > > > > > > > > > IPMI > > > > > > > > > > > > > > > and > > > > > > > > > > > > > > > > > > > > > > MCTP, how should we deal with this? > > > > > > > > > > > > > > > > > > > > > If KcsCommon.c, we can have different > > > > > > > > > > > > > > > > > > > > > code > > > path > > > > > for the > > > > > > > > > > given > > > > > > > > > > > > > > > protocol > > > > > > > > > > > > > > > > > > > > GUID. e.g., if (TransportToken- > > > > > > > > > > >ManagebilityProtocolSpecification > > > > > > > > > > > > > == > > > > > > > > > > > > > > > > > MCTP). > > > > > > > > > > > > > > > > > > > > > Then skip reading the > KCS_REPOSNSE_HEADER > > > or > > > > > to read > > > > > > > > > > the > > > > > > > > > > > > > > > > > > > > MCTP_RESPONSE_HEADER (I don see what is > the > > > > > response > > > > > > > > > > header > > > > > > > > > > > > > for > > > > > > > > > > > > > > > > > MCTP > > > > > > > > > > > > > > > > > > > > KCS in spec though, does it mention the > > > > > > > > > > > > > > > > > > > > KCS > > > > > response?). > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks > > > > > > > > > > > > > > > > > > > > > Abner > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Best regards, > > > > > > > > > > > > > > > > > > > > > > Konstantin Aladyshev > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Wed, Aug 23, 2023 at 5:18 AM > > > > > > > > > > > > > > > > > > > > > > Chang, > > > Abner > > > > > > > > > > > > > > > > > > > > <abner.ch...@amd.com> > > > > > > > > > > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > [AMD Official Use Only - General] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Please see my answers inline. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > > > > > > > > > > > > > > > > > > > From: disc...@edk2.groups.io > > > > > > > > > > <disc...@edk2.groups.io> > > > > > > > > > > > > > On > > > > > > > > > > > > > > > > > Behalf > > > > > > > > > > > > > > > > > > > Of > > > > > > > > > > > > > > > > > > > > > > > > Konstantin Aladyshev via > > > > > > > > > > > > > > > > > > > > > > > > groups.io > > > > > > > > > > > > > > > > > > > > > > > > Sent: Wednesday, August 23, 2023 > 1:54 > > > AM > > > > > > > > > > > > > > > > > > > > > > > > To: Chang, Abner > > > <abner.ch...@amd.com> > > > > > > > > > > > > > > > > > > > > > > > > Cc: disc...@edk2.groups.io; > > > > > devel@edk2.groups.io > > > > > > > > > > > > > > > > > > > > > > > > Subject: Re: [edk2-discuss] PLDM > > > messages > > > > > via MCTP > > > > > > > > > > over > > > > > > > > > > > > > KCS > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Caution: This message > > > > > > > > > > > > > > > > > > > > > > > > originated from > an > > > > > External > > > > > > > > > > Source. > > > > > > > > > > > > > Use > > > > > > > > > > > > > > > > > proper > > > > > > > > > > > > > > > > > > > > > > caution > > > > > > > > > > > > > > > > > > > > > > > > when opening attachments, > > > > > > > > > > > > > > > > > > > > > > > > clicking > links, > > > or > > > > > > > > > > responding. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks for the answer! > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I was a little bit confused > > > > > > > > > > > > > > > > > > > > > > > > about the > part, > > > that > > > > > in the > > > > > > > > > > same > > > > > > > > > > > > > > > package > > > > > > > > > > > > > > > > > I > > > > > > > > > > > > > > > > > > > > > > > > actually need to provide > > > > > > > > > > > > > > > > > > > > > > > > different library > > > > > > > > > > implementations > > > > > > > > > > > > > for > > > > > > > > > > > > > > > the > > > > > > > > > > > > > > > > > > > > > > > > same > > > > > > > > > > > > > > > > > > > > > > > > 'ManageabilityTransportLib', > thanks > > > for > > > > > the > > > > > > > > > > > > > clarification! > > > > > > > > > > > > > > > > > > > > > > > > I think your DSC example should > > > > > > > > > > > > > > > > > > > > > > > > go into > > > the > > > > > package > > > > > > > > > > > > > > > > > documentation. > > > > > > > > > > > > > > > > > > > > > > > Yes, this is a good idea. I will > > > > > > > > > > > > > > > > > > > > > > > update it. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > As for me, I'm working with the > OpenBMC > > > > > distribution > > > > > > > > > > > > > > > > > > > > > > > > > (https://github.com/openbmc/openbmc) > > > and > > > > > my goal > > > > > > > > > > is to > > > > > > > > > > > > > > > > > transfer > > > > > > > > > > > > > > > > > > > > data > > > > > > > > > > > > > > > > > > > > > > > > from the BIOS to the BMC via > MCTP/PLDM. > > > > > > > > > > > > > > > > > > > > > > > > Currently there is no solution > > > > > > > > > > > > > > > > > > > > > > > > for the > MCTP > > > > > over KCS > > > > > > > > > > binding > > > > > > > > > > > > > in > > > > > > > > > > > > > > > > > Linux, > > > > > > > > > > > > > > > > > > > > > > > > so I need to add this support: > > > > > > > > > > > > > > > > > > > > > > > > - either to the MCTP userspace > > > > > > > > > > > > > > > > > > > > > > > > library > > > > > > > > > > > > > > > > > > > > > > > > > (https://github.com/openbmc/libmctp) > > > [old > > > > > > > > > > OpenBMC > > > > > > > > > > > > > way, > > > > > > > > > > > > > > > but > > > > > > > > > > > > > > > > > > > > probably > > > > > > > > > > > > > > > > > > > > > > > > easier] > > > > > > > > > > > > > > > > > > > > > > > > - or to the MCTP kernel binding > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > (https://github.com/torvalds/linux/tree/master/drivers/net/mctp) > > > > > > > > > > > > > > > > > > > > > > > > [modern mctp Linux driver > > > > > > > > > > > > > > > > > > > > > > > > approach] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Both don't sound like an easy > > > > > > > > > > > > > > > > > > > > > > > > task, so > can I > > > > > ask, what > > > > > > > > > > MC > > > > > > > > > > > > > (i.e. > > > > > > > > > > > > > > > > > > > > > > > > management controller) device > > > > > > > > > > > > > > > > > > > > > > > > and > > > firmware > > > > > do you > > > > > > > > > > use on > > > > > > > > > > > > > > > the > > > > > > > > > > > > > > > > > other > > > > > > > > > > > > > > > > > > > > > > > > side of the MCTP KCS > > > > > > > > > > > > > > > > > > > > > > > > transmissions? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > We use OpenBMC as well, but as you > > > mention > > > > > there are > > > > > > > > > > some > > > > > > > > > > > > > > > > > missing > > > > > > > > > > > > > > > > > > > > pieces > > > > > > > > > > > > > > > > > > > > > > to fully support manageability > > > > > > > > > > > > > > > > > > > > > > between > host > > > and > > > > > BMC. > > > > > > > > > > > > > > > > > > > > > > > We don’t have code to handle MCTP > IPMI > > > > > either, the > > > > > > > > > > edk2 > > > > > > > > > > > > > > > > > > > > ManageabilityPkg > > > > > > > > > > > > > > > > > > > > > > provides the framework while > > > MCTP/PLDM/KCS > > > > > > > > > > > > > implementation > > > > > > > > > > > > > > > > > > > provides > > > > > > > > > > > > > > > > > > > > a > > > > > > > > > > > > > > > > > > > > > > sample other than IPMI/KCS to prove > > > > > > > > > > > > > > > > > > > > > > the > > > > > flexibility of > > > > > > > > > > > > > > > > > ManageabilityPkg. > > > > > > > > > > > > > > > > > > > > > > > Actually, MCTP over KCS is not > > > > > > > > > > > > > > > > > > > > > > > supported > in > > > our > > > > > BMC > > > > > > > > > > > > > firmware > > > > > > > > > > > > > > > yet, > > > > > > > > > > > > > > > > > > > thus > > > > > > > > > > > > > > > > > > > > > > BMC just returns the invalid > > > > > > > > > > > > > > > > > > > > > > command. > > > However, > > > > > the > > > > > > > > > > transport > > > > > > > > > > > > > > > > > > > framework > > > > > > > > > > > > > > > > > > > > > > has been verified to make sure the > > > > > implementation works > > > > > > > > > > fine > > > > > > > > > > > > > as > > > > > > > > > > > > > > > > > expect. > > > > > > > > > > > > > > > > > > > > > > > We need help from community to > provide > > > more > > > > > > > > > > > > > manageability > > > > > > > > > > > > > > > > > > > protocols > > > > > > > > > > > > > > > > > > > > and > > > > > > > > > > > > > > > > > > > > > > transport interface libraries to > > > > > > > > > > > > > > > > > > > > > > this package. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > You've also mentioned PLDM > > > > > > > > > > > > > > > > > > > > > > > > SMBIOS, > isn't > > > it > > > > > covered > > > > > > > > > > by > > > > > > > > > > > > > the > > > > > > > > > > > > > > > > > > > > > > > > https://github.com/tianocore/edk2- > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > platforms/blob/master/Features/ManageabilityPkg/Universal/PldmSmbiosTr > > > > > > > > > > > > > > > > > > > > > > > > ansferDxe/PldmSmbiosTransferDxe.c > > > > > > > > > > > > > > > > > > > > > > > > ? > > > > > > > > > > > > > > > > > > > > > > > Ah hah, yes I forget I upstream > > > > > > > > > > > > > > > > > > > > > > > it. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Please just feel free to send > > > > > > > > > > > > > > > > > > > > > > > patch to > make > > > more > > > > > > > > > > > > > functionalities to > > > > > > > > > > > > > > > > > this > > > > > > > > > > > > > > > > > > > > > > package. > > > > > > > > > > > > > > > > > > > > > > > Thanks > > > > > > > > > > > > > > > > > > > > > > > Abner > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Best regards, > > > > > > > > > > > > > > > > > > > > > > > > Konstantin Aladyshev > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Tue, Aug 22, 2023 at 7:26 PM > Chang, > > > > > Abner > > > > > > > > > > > > > > > > > > > > > > <abner.ch...@amd.com> > > > > > > > > > > > > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > [AMD Official Use Only - > > > > > > > > > > > > > > > > > > > > > > > > > General] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi Aladyshev, > > > > > > > > > > > > > > > > > > > > > > > > > We use library class to > > > > > > > > > > > > > > > > > > > > > > > > > specify the > desire > > > > > transport > > > > > > > > > > > > > interface > > > > > > > > > > > > > > > for > > > > > > > > > > > > > > > > > the > > > > > > > > > > > > > > > > > > > > > > > > management protocol, such as > > > > > > > > > > > > > > > > > > > > > > > > MCTP, > > > PLDM > > > > > and IPMI. > > > > > > > > > > This > > > > > > > > > > > > > > > way > > > > > > > > > > > > > > > > > we > > > > > > > > > > > > > > > > > > > can > > > > > > > > > > > > > > > > > > > > > > > > flexibly support any transport > > > > > > > > > > > > > > > > > > > > > > > > interface > for > > > the > > > > > > > > > > management > > > > > > > > > > > > > > > > > protocol. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Here is the example of using > > > > > ManageabilityPkg, which > > > > > > > > > > is > > > > > > > > > > > > > > > PLDM > > > > > > > > > > > > > > > > > over > > > > > > > > > > > > > > > > > > > > MCTP > > > > > > > > > > > > > > > > > > > > > > > > over KCS. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ManageabilityPkg/Universal/IpmiProtocol/Dxe/IpmiProtocolDxe.inf > > > > > > > > > > > > > > > > > > > > { > > > > > > > > > > > > > > > > > > > > > > > > > <LibraryClasses> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ManageabilityTransportLib|ManageabilityPkg/Library/ManageabilityTranspor > > > > > > > > > > > > > > > > > > > > > > > > > > > > > tKcsLib/Dxe/DxeManageabilityTransportKcs.inf > > > > > > > > > > > > > > > > > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ManageabilityPkg/Universal/MctpProtocol/Dxe/MctpProtocolDxe.inf > > > > > > > > > > > > > > > { > > > > > > > > > > > > > > > > > > > > > > > > > <LibraryClasses> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ManageabilityTransportLib|ManageabilityPkg/Library/ManageabilityTranspor > > > > > > > > > > > > > > > > > > > > > > > > > > > > > tKcsLib/Dxe/DxeManageabilityTransportKcs.inf > > > > > > > > > > > > > > > > > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ManageabilityPkg/Universal/PldmProtocol/Dxe/PldmProtocolDxe.inf > > > > > > > > > > > > > > > { > > > > > > > > > > > > > > > > > > > > > > > > > <LibraryClasses> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ManageabilityTransportLib|ManageabilityPkg/Library/ManageabilityTranspor > > > > > > > > > > > > > > > > > > > > > > > > > > > > > tMctpLib/Dxe/DxeManageabilityTransportMctp.inf > > > > > > > > > > > > > > > > > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > So you can implement > > > > > ManageabilityTransport library > > > > > > > > > > for > > > > > > > > > > > > > > > either > > > > > > > > > > > > > > > > > > > > industry > > > > > > > > > > > > > > > > > > > > > > > > standard or proprietary > > > > > > > > > > > > > > > > > > > > > > > > implementation > for > > > > > the specific > > > > > > > > > > > > > > > > > management > > > > > > > > > > > > > > > > > > > > > > > > protocol. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > BTW, We do have PLDM SMBIOS > > > > > > > > > > > > > > > > > > > > > > > > > over > > > MCTP > > > > > > > > > > > > > implementation > > > > > > > > > > > > > > > but > > > > > > > > > > > > > > > > > > > not > > > > > > > > > > > > > > > > > > > > > > > > upstream yet. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hope this information helps. > > > > > > > > > > > > > > > > > > > > > > > > > Thanks > > > > > > > > > > > > > > > > > > > > > > > > > Abner > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > > > > > > > > > > > > > > > > > > > > > From: disc...@edk2.groups.io > > > > > > > > > > > > > <disc...@edk2.groups.io> > > > > > > > > > > > > > > > On > > > > > > > > > > > > > > > > > > > > Behalf Of > > > > > > > > > > > > > > > > > > > > > > > > > > Konstantin Aladyshev via > > > > > > > > > > > > > > > > > > > > > > > > > > groups.io > > > > > > > > > > > > > > > > > > > > > > > > > > Sent: Tuesday, August 22, > > > > > > > > > > > > > > > > > > > > > > > > > > 2023 > 7:00 > > > PM > > > > > > > > > > > > > > > > > > > > > > > > > > To: discuss > <disc...@edk2.groups.io>; > > > > > > > > > > > > > > > devel@edk2.groups.io > > > > > > > > > > > > > > > > > > > > > > > > > > Subject: [edk2-discuss] PLDM > messages > > > via > > > > > MCTP > > > > > > > > > > over > > > > > > > > > > > > > KCS > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Caution: This message > > > > > > > > > > > > > > > > > > > > > > > > > > originated > from > > > an > > > > > External > > > > > > > > > > > > > Source. > > > > > > > > > > > > > > > Use > > > > > > > > > > > > > > > > > > > > proper > > > > > > > > > > > > > > > > > > > > > > > > caution > > > > > > > > > > > > > > > > > > > > > > > > > > when opening attachments, > > > > > > > > > > > > > > > > > > > > > > > > > > clicking > > > links, > > > > > or > > > > > > > > > > responding. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi! > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I'm trying to build > `ManageabilityPkg` > > > from > > > > > the > > > > > > > > > > edk2- > > > > > > > > > > > > > > > platforms > > > > > > > > > > > > > > > > > > > > > > > > > > repo to issue PLDM > > > > > > > > > > > > > > > > > > > > > > > > > > messages via > MCTP > > > > > over KCS. > > > > > > > > > > Is it > > > > > > > > > > > > > > > possible > > > > > > > > > > > > > > > > > > > with > > > > > > > > > > > > > > > > > > > > > > > > > > the current code? I see all > > > > > > > > > > > > > > > > > > > > > > > > > > the > building > > > > > blocks, but > > > > > > > > > > have > > > > > > > > > > > > > > > trouble > > > > > > > > > > > > > > > > > > > > > > > > > > putting it all together. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > The main question that > > > > > > > > > > > > > > > > > > > > > > > > > > bothers me > is > > > what > > > > > > > > > > > > > implementation > > > > > > > > > > > > > > > > > should > > > > > > > > > > > > > > > > > > > I > > > > > > > > > > > > > > > > > > > > set > > > > > > > > > > > > > > > > > > > > > > > > > > for the > > > > > > > > > > > > > > > > > > > > > > > > > > `ManageabilityTransportLib`? > > > > > > > > > > > > > > > > > > > > > > > > > > By default it is set to > > > > > > > > > > > > > > > > > > > > > > > > > > dummy > > > > > > > > > > > > > > > > > `BaseManageabilityTransportNull.inf` > > > > > > > > > > > > > > > > > > > > > > > > > > > (https://github.com/tianocore/edk2- > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > platforms/blob/master/Features/ManageabilityPkg/ManageabilityPkg.dsc). > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On one case to get PLDM via > > > > > > > > > > > > > > > > > > > > > > > > > > MCTP it > > > looks > > > > > that I > > > > > > > > > > need to > > > > > > > > > > > > > set > > > > > > > > > > > > > > > it > > > > > > > > > > > > > > > > > to > > > > > > > > > > > > > > > > > > > > > > > > > > > `DxeManageabilityTransportMctp.inf` > > > > > > > > > > > > > > > > > > > > > > > > > > ManageabilityTransportLib| > > > > > > > > > > > > > > > > > > > > <...>/DxeManageabilityTransportMctp.inf > > > > > > > > > > > > > > > > > > > > > > > > > > > (https://github.com/tianocore/edk2- > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > platforms/blob/master/Features/ManageabilityPkg/Library/ManageabilityTra > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > nsportMctpLib/Dxe/DxeManageabilityTransportMctp.inf) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > But on the other case if I > > > > > > > > > > > > > > > > > > > > > > > > > > want MCTP > > > over > > > > > KCS I > > > > > > > > > > need to > > > > > > > > > > > > > set > > > > > > > > > > > > > > > it to > > > > > > > > > > > > > > > > > > > > > > > > > > `DxeManageabilityTransportKcs.inf` > > > > > > > > > > > > > > > > > > > > > > > > > > ManageabilityTransportLib| > > > > > > > > > > > > > > > > > > > <...>/DxeManageabilityTransportKcs.inf > > > > > > > > > > > > > > > > > > > > > > > > > > > (https://github.com/tianocore/edk2- > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > platforms/blob/master/Features/ManageabilityPkg/Library/ManageabilityTra > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > nsportKcsLib/Dxe/DxeManageabilityTransportKcs.inf) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > What is the right way to > > > > > > > > > > > > > > > > > > > > > > > > > > resolve > this? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > There are no platforms in > > > > > > > > > > > > > > > > > > > > > > > > > > the repo > that > > > > > actually > > > > > > > > > > > > > implement > > > > > > > > > > > > > > > > > > > > PLDM/MCTP > > > > > > > > > > > > > > > > > > > > > > > > > > functionality, so there is > > > > > > > > > > > > > > > > > > > > > > > > > > no example > > > that I > > > > > can use > > > > > > > > > > as a > > > > > > > > > > > > > > > > > reference. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Best regards, > > > > > > > > > > > > > > > > > > > > > > > > > > Konstantin Aladyshev > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#109617): https://edk2.groups.io/g/devel/message/109617 Mute This Topic: https://groups.io/mt/100897530/21656 Group Owner: devel+ow...@edk2.groups.io Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
