Thanks,
Ray
________________________________
From: Gerd Hoffmann <kra...@redhat.com>
Sent: Thursday, April 25, 2024 14:58
To: Ni, Ray <ray...@intel.com>
Cc: Wu, Jiaxin <jiaxin...@intel.com>; devel@edk2.groups.io
<devel@edk2.groups.io>; Zeng, Star <star.z...@intel.com>; Kumar, Rahul R
<rahul.r.ku...@intel.com>; Dong, Guo <guo.d...@intel.com>; Rhodes, Sean
<sean@starlabs.systems>; Lu, James <james...@intel.com>; Guo, Gua
<gua....@intel.com>; Ard Biesheuvel <ardb+tianoc...@kernel.org>; Yao, Jiewen
<jiewen....@intel.com>; Abdul Lateef Attar <abdullateef.at...@amd.com>; Abner
Chang <abner.ch...@amd.com>; Tom Lendacky <thomas.lenda...@amd.com>
Subject: Re: [edk2-devel] [PATCH v3 00/13] Add SmmRelocationLib
Hi,
> That means the SMMRevId is 0_xx64h for AMD64 processor. But I am not
> sure what the value is for AMD32 processor. Maybe 0 according to the
> OVMF logic.
The smm emulation in the linux kernel uses 0 and 0x64.
[Ray] OK. that supports the OVMF instance's logic. But I'd like Tom or any
other AMD guys to provide spec that says 0 for AMD32.
> But, I am very suspicious about the logic in AMD's version as below:
> --- AMD's version
> SmmSaveStateRegisterLma = (UINT8)EFI_MM_SAVE_STATE_REGISTER_LMA_32BIT;
>
> LMAValue = (UINT32)AsmReadMsr64 (EFER_ADDRESS) & LMA;
> if (LMAValue) {
> SmmSaveStateRegisterLma = (UINT8)EFI_MM_SAVE_STATE_REGISTER_LMA_64BIT;
> }
> ---
> The above logic detects the current CPU mode and 64bit save state area layout
> is used if it's running in 64bit.
> But if a AMD64 CPU runs in 32bit mode, the above logic causes the
> 32bit save state area layout is used. It's not right! The save state
> area layout does not depend on the CPU running mode, but whether it's
> a legacy CPU or a 64-capable CPU.
Well, that is not entirely clear to me. Could it be 64-bit processors
support both 32-bit and 64-bit format, for backward compatibility
reasons?
[Ray] The CPU uses a fixed save state area layout no matter it runs in 32bit or
64bit.
The 64bit cpu only uses the 64bit format, no matter it runs in 32bit or 64bit.
So OvmfPkgIa32 builds could use the 32-bit format, OvmfPkgX64 builds use
the 64-bit format, everything works fine?
[Ray] For OVMF, it depends on how the virtual cpu is defined by QEMU
implementation.
If the underline CPU is a AMD64 cpu, the CPU supports running in 32bit or 64bit
modes. But no matter
it runs in 32bit or 64bit, the save state area layout always follows the 64bit
format.
The tricky corner case is OvmfPkgIa32X64, where (after applying this
series) 32-bit PEI should setup things for 64-bit SMM/DXE, and checking
the current processor mode will not give use the result we need.
> Jiaxin, I agree that the confusion should be cleaned up by AMD
> experts. Let's not change any existing behavior.
Agree. Tom?
take care,
Gerd
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#118310): https://edk2.groups.io/g/devel/message/118310
Mute This Topic: https://groups.io/mt/105593568/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
