Alexei Pashkovsky wrote:
>
> Hi there,
> OK, I got the 1601 cisco connected, now trying to configure it for x.25, can
> you help me ?
> Thanks.
OK, this is a chopped version of the config I used to do satellite comms,
it should get you started but you'll need to fiddle.
The most interesting bit is the line 33 command, it refers to one of the serial
ports,
either Serial 1/0 or Serial 1/1 and allows you to address an interface as a
serial port.
!
version 12.0
service nagle
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec
service timestamps log uptime
no service password-encryption
!
memory-size iomem 15
ip subnet-zero
ip tcp path-mtu-discovery
ip telnet source-interface Loopback0
ip tftp source-interface Loopback0
no ip domain-lookup
!
!
!
interface Loopback0
ip address x.x.x.x 255.255.255.255
no ip directed-broadcast
!
interface Ethernet0/0
ip address x.x.x.x 255.255.255.0
no ip directed-broadcast
!
interface Serial0/0
ip address x.x.x.x 255.255.255.252
no ip directed-broadcast
no ip mroute-cache
keepalive 2
no fair-queue
down-when-looped
!
interface Serial1/0
physical-layer async
no ip address
no ip directed-broadcast
!
interface Serial1/1
no ip address
no ip directed-broadcast
no ignore-hw local-loopback
!
router ospf 10
network x.x.x.x 0.255.255.255 area x.x.x.x
default-information originate metric 50
!
!
line 33
no motd-banner
no exec-banner
exec-timeout 0 0
no flush-at-activation
no activation-character
no vacant-message
login
autocommand telnet x.x.x.x yyyy /stream
special-character-bits 8
escape-character NONE
autohangup
stopbits 1
speed 19200
line aux 0
no motd-banner
no exec-banner
exec-timeout 20 0
no flush-at-activation
no activation-character
no vacant-message
special-character-bits 8
escape-character NONE
autohangup
stopbits 1
speed 19200
line vty 0 4
exec-timeout 0 0
password 7 1511021F0725
login
!
no scheduler allocate
--
Derry Hamilton, [EMAIL PROTECTED]
"I think your cats need tuning - according to a couple of quick measurements
on a recently calibrated reference cat, the dominant frequency of a correctly
adjusted cat should be 12Hz +/-20%." ===Lionel Lauer on a.s.r===
