1)open minicom or any serial terminal and type ATI you should get Siemens firmware version 2)if you loose power during the upgrade.. well, what happens if you drop a hummer on your siemens ? I think these are equal, and the answer would be - go to the service center.
----- Original Message ----- From: "Patrick Mignott" <[EMAIL PROTECTED]> To: "Alexei Pashkovsky" <[EMAIL PROTECTED]> Sent: Tuesday, October 30, 2001 6:39 PM Subject: Re: For your kind attention! two questions, how do i know what frameware my m20t is running? also what if i lose power during upgrade? what recover efforts can be made? ----- Original Message ----- From: "Alexei Pashkovsky" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, October 30, 2001 12:50 AM Subject: Re: For your kind attention! Hi all, reminding the location of siemens firmware i uploaded : www.pashkovsky.com/siemens/ Just FYI, we currently run AT2 module from lastest CVS with 8(!) siemens m20T devices connected on same machine and we use them for both incoming and outgoing traffic. System is stable, and works smooth. If you wonder how one connected 8 serial devices to a PC, check this : http://www.ionetworks.com/products/edgeport.html ----- Original Message ----- From: "Stipe Tolj" <[EMAIL PROTECTED]> To: "idowu oduntan" <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Tuesday, October 30, 2001 10:47 AM Subject: Re: For your kind attention! > I am presently setting up Kannel to run as an SMS > gateway using compiled version of 1.0.3. I am using a > siemens GSM modem as the SMSC. > > With my present configurations, I can send messages > through my smsc from the admin html console via a > browser. But messages sent to me are not received and > no indications of these are made in any form, even in > the logs. If you are running an "older firmware version on your Siemens M20 then this may be the cause. Please search the mailing list archive for an update location someone posted recently, where you can get the update for the firmware software. Anyway, 1.0.3 is quite old, considered in terms of smsc_at.c (the GSM modem SMSC implementation). You should be using a CVS snapshot instead. Unfortunatly we currently don't have any "latest" stable release, so CVS is appropriate for now. > I am not receiving messages via the smsc. Is there a > specific receive-thread that must be started before > messages can be recieved? No, bearerbox is responsible for serial com communication and smsbox for the processing. > Does the bearerbox listen continuosly to the smsc and > is there a way I can dictate the frequency at which > the bearerbox retrieves messages from the smsc(phone > modem). No, bearerbox does (or should :)) listen continously for incomding messages. Can you send as much messages as you want via the SMSC, but don't receive any? Or may it be that you send a couple of messages, the SMSC connection drops and you try to receive and wonder why it does not come? Anyway, a bearerbox and smsbox log (not to heavy please :)) would be best for the list to review what you are trying. Stipe [EMAIL PROTECTED] ------------------------------------------------------------------- Wapme Systems AG Münsterstr. 248 40470 Düsseldorf Tel: +49-211-74845-0 Fax: +49-211-74845-299 E-Mail: [EMAIL PROTECTED] Internet: http://www.wapme-systems.de ------------------------------------------------------------------- wapme.net - wherever you are
