Did anyone reviewed this patch?
On 9/7/07, Alejandro Guerrieri <[EMAIL PROTECTED]> wrote:
> The original condition was commented:
>
> + if (/*user == NULL || pass == NULL ||*/ /* we don't need this anymore */
> + octstr_compare(user, conndata->username) != 0 ||
> + octstr_compare(pass, conndata->password) != 0) {
> + error(0, "HTTP[%s]: Authorization failure",
>
> The piece of code you're referencing it's before the original (now
> commented) evaluation. The purpose is to truly make user and password
> optionals.
>
> And yes, you're absolutely right, it should be "||" to avoid
> octstr_compare on an undefined value.
>
> Thanks for pointing this out. I've uploaded a new patch here:
>
> http://www.magicom-bcn.net/kannel/full-mo-http-params-20070907.patch
>
> Regards,
>
> Alejandro
>
>
> On 9/7/07, Vincent CHAVANIS <[EMAIL PROTECTED]> wrote:
> > Hi alejandro,
> >
> > I'm wondering why this condition has been changed
> >
> > if (user == NULL || pass == NULL) {
> > user = octstr_create("");
> > pass = octstr_create("");
> > }
> >
> > into:
> >
> > if (user == NULL && pass == NULL) {
> > user = octstr_create("");
> > pass = octstr_create("");
> > }
> >
> > I think that we need to check both of these values.
> > if user = blah and password = NULL
> > we will do octstr_compare with password and this is not safe.
> >
> > Vincent.
> >
> > --
> > Telemaque - 06560 SOPHIA-ANTIPOLIS - (FR)
> > Service Technique/Reseau - NOC
> > Developpement SMS/MMS/Kiosques
> > http://www.telemaque.fr/
> > [EMAIL PROTECTED]
> > Tel : +33 4 92 90 99 84 (fax 9142)
> > ----- Original Message -----
> > From: "Alejandro Guerrieri" <[EMAIL PROTECTED]>
> > To: "Alexander Malysh" <[EMAIL PROTECTED]>
> > Cc: <[email protected]>
> > Sent: Thursday, September 06, 2007 10:31 PM
> > Subject: Re: [PATCH] Support for MO parameters on 'generic' HTTP SMSC -
> > Secondrevision
> >
> >
> > > Done,
> > > Done,
> > >
> > > New version of the patch, using generic_receive_sms() instead of
> > > kannel_receive_sms()
> > >
> > > http://www.magicom-bcn.net/kannel/full-mo-http-params-20070906.patch
> > >
> > > Regards,
> > >
> > > Alejandro
> > >
> > > On 9/6/07, Alexander Malysh <[EMAIL PROTECTED]> wrote:
> > >> Hi,
> > >>
> > >> please doesn't change kannel http mode. Please define new MO function for
> > >> generic HTTP mode instead.
> > >>
> > >> Alejandro Guerrieri wrote:
> > >>
> > >> > Hi,
> > >> >
> > >> > I've improved my patch and added extra flexibility. Now it's possible
> > >> > to implement full clickatell functionality (including DLR's) by
> > >> > properly configure the 'generic' http smsc.
> > >> >
> > >> > The patch is available here:
> > >> >
> > >> > http://magicom-bcn.net/kannel/full-mo-http-params-20070905.patch
> > >> >
> > >> > The patch allows for this new parameters on config:
> > >> >
> > >> > * This parameters allows to rename the proper MO parameters to
> > >> > whatever you like:
> > >> >
> > >> > mo-from
> > >> > mo-to
> > >> > mo-text
> > >> > mo-udh
> > >> > mo-account
> > >> > mo-binfo
> > >> > mo-dlr-url
> > >> > mo-dlr-mid
> > >> > mo-flash
> > >> > mo-mclass
> > >> > mo-mwi
> > >> > mo-coding
> > >> > mo-validity
> > >> > mo-deferred
> > >> > mo-dlr-mask
> > >> > mo-dlr-stat -> this special one allows you to rename the message_id
> > >> > being returned by an external dlr confirmation, such as clickatell's
> > >> > "status" parameter.
> > >> >
> > >> > For example, setting mo-from = whatever, then the "from" parameter
> > >> > will be renamed "whatever".
> > >> >
> > >> > * This allows you to rename the return string the http generic smsc
> > >> > returns:
> > >> >
> > >> > mo-ret-accepted
> > >> > mo-ret-denied
> > >> > mo-ret-unknown-dlr
> > >> > mo-ret-missing-args
> > >> > mo-ret-udh-mismatch
> > >> > mo-ret-udh-long
> > >> > mo-ret-auth-failed
> > >> > mo-ret-dlr-accepted
> > >> > mo-ret-dlr-denied
> > >> >
> > >> > For example, the mo-ret-accpeted allows you to change the "Sent." text
> > >> > you get for anything else.
> > >> >
> > >> > Now comes the "new" features:
> > >> >
> > >> > id-from-reply -> When you send an MT message to an external http smsc
> > >> > and you ask for a DLR, kannel "invents" a message_id. This parameters
> > >> > allows you to get that message id from the external source,
> > >> > effectively enabling the use of DLR's with clickatell. You must fill
> > >> > this field with the text expected _before_ the message_id. In the case
> > >> > of clickatell that's "ID:". So, if you get "ID:12345678" the
> > >> > message_id will be "12345678".
> > >> >
> > >> > err-from-reply -> Same thing but for error id's.
> > >> >
> > >> > This 3 parameters allows you to map different external statuses to
> > >> > kannel dlr statuses:
> > >> >
> > >> > dlr-success-regex -> maps to DLR_SUCCESS (0x08)
> > >> > dlr-permfail-regex -> maps to DLR_BUFFERED (0x04)
> > >> > dlr-tempfail-regex -> maps to DLR_FAILED (0x02)
> > >> >
> > >> > So, to implement clickatell's connectivity for MT and DLR's, you just
> > >> > need to configure like this:
> > >> >
> > >> > group = smsc
> > >> > smsc = http
> > >> > system-type = generic
> > >> > smsc-id = clicka
> > >> > allowed-smsc-id = clicka
> > >> > port = 15000
> > >> > send-url =
> > >> > "https://api.clickatell.com/http/sendmsg?to=%p&from=%P&text=%b&api_id=NNNNNN&user=XXXXXX&password=PPPPPP&callback=3&deliv_ack=3&req_feat=8192";
> > >> > status-success-regex = "ID" status-permfail-regex = "ERR"
> > >> > status-tempfail-regex = "TEMP"
> > >> > mo-dlr-mid = apiMsgId
> > >> > mo-dlr-stat = status
> > >> > id-from-reply = "ID:"
> > >> > err-from-reply = "ERR:"
> > >> > dlr-success-regex ="(004|008)"
> > >> > dlr-permfail-regex = "(001|005|006|007|009|010)"
> > >> > dlr-tempfail-regex ="(002|003|011)"
> > >> >
> > >> > I'll explain a little more:
> > >> >
> > >> > send-url points to the clickatell http api. A few parameters are
> > >> > hardcoded, like api_id, user/pass, etc.
> > >> > status-*-regex (current kannel functionality) is used to detect
> > >> > whether the message was accepted by clickatell's api.
> > >> >
> > >> > mo-dlr-* is used to map the DLR parameters to kannel's own.
> > >> >
> > >> > id/err-from-reply is used to fetch the message/error id on MT from
> > >> > clickatell's http response. This is mandatory for DLR's only.
> > >> >
> > >> > dlr-*-regex is used to map the different possible responses to
> > >> > different kannel DLR status. So, if kannel responds with "004" or
> > >> > "008" a DLR Success will be sent (0x08 for Kannel).
> > >> >
> > >> > I don't have a two-way account for clickatell, so I couldn't test the
> > >> > MO part, but it should be as simple as to map the proper parameters by
> > >> > configuring mo-* parameters and maybe mapping some mo-ret-* strings
> > >> > also.
> > >> >
> > >> > Last by not least, the goal of this patch wasn't to replace the
> > >> > clickatell interface, but to provide a generic mean to implement other
> > >> > SMSC's without writing source code and recompiling. The clickatell
> > >> > example was just that, an example of the capabilities being added.
> > >> >
> > >> > I'd happily try to model other http smsc's (even extending the patch
> > >> > to accomodate extra flexibility), just drop me a line in private and
> > >> > send me docs about it.
> > >> >
> > >> > Regards,
> > >>
> > >> --
> > >> Thanks,
> > >> Alex
> > >>
> > >>
> > >>
> > >
> > >
> > > --
> > > Alejandro Guerrieri
> > > Magicom
> > > http://www.magicom-bcn.net/
> > > LinkedIn: http://www.linkedin.com/in/aguerrieri
> > >
> > >
> >
> >
> >
> >
>
>
> --
> Alejandro Guerrieri
> Magicom
> http://www.magicom-bcn.net/
> LinkedIn: http://www.linkedin.com/in/aguerrieri
>
--
Alejandro Guerrieri
Magicom
http://www.magicom-bcn.net/
LinkedIn: http://www.linkedin.com/in/aguerrieri
