Hi,
patch commited to cvs, thanks!
Am 14.02.2009 um 16:36 schrieb P. A. Bagyenda:
A while back I made some changes to the AT2 module to get it working
with a 460800 baud modem. Here is a cleaned up version of the patch:
It merely includes more speed cases, and allows the default to be
any speed (rather than 9600) *if* the OS behaves like OSX where
B9600 == 9600 (not so under Linux).
Paul.
<smsc_at.diff>
On Aug 03, 2007, at 09:29, Andreas Fink wrote:
On 01.08.2007, at 12:16, P. A. Bagyenda wrote:
Thanks Andreas,
As I indicated, this was just a rough stab to get it to work for
me. Here is what happens without these changes: Regular modem
initialisation seems to work fine, until you try to send out a
message. Then, for some reason, the modem is deemed (by the AT2
module) to never answer the request. Issue the same send request
from minicom and all works fine.
We'd need, as you rightly point out, some form of ifdef usage to
only make the changes for OSX (are there any OSX machines with
serial ports anymore??). Perhaps others could try this out and
advise first...
Yes there are OSX machines with serial ports. The XServe has a 9pin
sub-D connector at the back. Furthermore all of this works
perfectly fine on USB serial adapters.
I would advise you to add modifications one by one and see which
one starts making it work. I presume it might be hardware handshake
or something like that which is not really used on RF based
bluetooth or so.
Andreas Fink
Fink Consulting GmbH
Global Networks Schweiz AG
BebbiCell AG
---------------------------------------------------------------
Tel: +41-61-6666330 Fax: +41-61-6666331 Mobile: +41-79-2457333
Address: Clarastrasse 3, 4058 Basel, Switzerland
E-Mail: [email protected]
www.finkconsulting.com www.global-networks.ch www.bebbicell.ch
---------------------------------------------------------------
ICQ: 8239353 MSN: [email protected] AIM: smsrelay Skype: andreasfink
Yahoo: finkconsulting SMS: +41792457333
