ok !
I didn't get the point from your first message ;)
will try to provide a patch soon.
(We need to add the speed variable)
Vincent.
P. A. Bagyenda a écrit :
Other way round, Vincent. If B9600 != 9600, we will set speed to (the
macro) B9600. Otherwise we'll set it to whatever non-standard bps the
user provided. As I said, this seems reasonable for systems such as
Linux where the BXXXX is never equal to XXXX, and for others such as Mac
OS X where they are always equal.
P.
On Feb 16, 2009, at 21:53, Vincent CHAVANIS wrote:
The function do not *set* any bps.
And i don't see any default cases.
The system will just follows the max->min speeds
in order to found the best speed available
from the OS.
@Paul:
Did i miss something Paul ?
Your previous patch allows non-standard systems
to set at least B9600, if B9600 != 9600
we will set the user value, right ?
(If i remeber well, an issue on old SunOS
and NetBSD version seems to not define 9600 as B9600)
Vincent
Nikos Balkanas a e'crit :
Not exactly the same. In the default case you are supposed to set it
to the actual bps requested, not to 9600. Could you update?
BR,
Nikos
----- Original Message ----- From: "Vincent CHAVANIS"
<[email protected]>
To: <[email protected]>
Sent: Monday, February 16, 2009 12:31 PM
Subject: [PATCH] EMI_X25 smsc module support for high speed modems
--
Telemaque - 06560 SOPHIA-ANTIPOLIS - (FR)
Service Technique/Reseau - NOC
Direction du Developpement xMS+
http://www.telemaque.fr/
[email protected]
Tel : +33 4 92 90 99 84 (fax 9142)
