Hi, You cannot capture tcp packets from the same server. You don't get actual TCP traffic. You need to do it from another server. But, why do you want to capture your lynx output? That's not the issue.
BR, Nikos ----- Original Message ----- From: Benjamin Heryanto To: [email protected] Sent: Saturday, October 10, 2009 3:48 AM Subject: Re: Confuse smpp with tlv Dear List if i use lynx "http://127.0.0.1:13013/cgi-bin/sendsms?user=...... to send sms there is no wireshark capture for what i sent, how to capture this action (capture filter in wireshark) coz i can see the kannel.log (see my email before) ... Thx Benjamin On Fri, Oct 9, 2009 at 6:25 AM, Benjamin Heryanto <[email protected]> wrote: Dear Nikos I attach the wire output Regards Benjamin 2009/10/9 Nikos Balkanas <[email protected]> Hi, Could you please attach relevant wireshark output? BR, Nikos ----- Original Message ----- From: Benjamin Heryanto To: [email protected] Sent: Friday, October 09, 2009 1:23 AM Subject: Confuse smpp with tlv Dear list After configure smpp with tlv (using cvs version "Kannel/cvs-20090520") This is my configuration group = smsc smsc = smpp host = xxx.xxx.xxx.xxx port = 10293 smsc-username = a smsc-password = b system-type = tcp smsc-id = new allowed-smsc-id = new transceiver-mode = yes source-addr-ton = 0 source-addr-npi = 1 source-addr-autodetect = no address-range = "" dest-addr-ton = 0 dest-addr-npi = 1 msg-id-type = 0x01 throughput = 1 /etc/kannel/smpp-tlv.conf group = smpp-tlv name = short_name tag = 0x5120 type = octetstring length = 8 group = smpp-tlv name = txid tag = 0x5121 type = integer length = 20 group = smpp-tlv name = conttype tag = 0x5123 type = octetstring length = 20 lynx "http://127.0.0.1:13013/cgi-bin/sendsms?user=new&smsc=new&pass=new&to=234355058673&from=123404&text=testing+push&meta-data=%3Fsmpp%3Fshort_name%3Dcr9trial"; In /var/log/kannel/access.log 2009-10-08 11:14:56 FAILED Send SMS [SMSC:new] [SVC:abc] [ACT:] [BINF:] [FID:] [META:?smpp?short_name=cr9trial] [from:123404] [to:234355058673] [flags:-1:0:-1:-1:-1] [msg:12:testing push] [udh:0:] In /var/log/kannel/kannel.log 2009-10-08 11:14:55 [10888] [32] DEBUG: boxc_receiver: sms received 2009-10-08 11:14:55 [10888] [32] DEBUG: send_msg: sending msg to box: <127.0.0.1> 2009-10-08 11:14:55 [10888] [9] DEBUG: SMPP[new]: Manually forced source addr ton = 0, source add npi = 1 2009-10-08 11:14:55 [10888] [9] DEBUG: SMPP[new]: Manually forced dest addr ton = 0, dest add npi = 1 2009-10-08 11:14:55 [10888] [9] DEBUG: new group created `smpp' 2009-10-08 11:14:55 [10888] [9] DEBUG: group=`smpp' key=`short_name' value=`cr9trial' 2009-10-08 11:14:55 [10888] [9] DEBUG: SMPP[new]: Sending PDU: 2009-10-08 11:14:55 [10888] [9] DEBUG: SMPP PDU 0xc7c0ef0 dump: 2009-10-08 11:14:55 [10888] [9] DEBUG: type_name: submit_sm 2009-10-08 11:14:55 [10888] [9] DEBUG: command_id: 4 = 0x00000004 2009-10-08 11:14:55 [10888] [9] DEBUG: command_status: 0 = 0x00000000 2009-10-08 11:14:55 [10888] [9] DEBUG: sequence_number: 25577 = 0x000063e9 2009-10-08 11:14:55 [10888] [9] DEBUG: service_type: NULL 2009-10-08 11:14:55 [10888] [9] DEBUG: source_addr_ton: 0 = 0x00000000 2009-10-08 11:14:55 [10888] [9] DEBUG: source_addr_npi: 1 = 0x00000001 2009-10-08 11:14:55 [10888] [9] DEBUG: source_addr: "123404" 2009-10-08 11:14:55 [10888] [9] DEBUG: dest_addr_ton: 0 = 0x00000000 2009-10-08 11:14:55 [10888] [9] DEBUG: dest_addr_npi: 1 = 0x00000001 2009-10-08 11:14:55 [10888] [9] DEBUG: destination_addr: "234355058673" 2009-10-08 11:14:55 [10888] [9] DEBUG: esm_class: 3 = 0x00000003 2009-10-08 11:14:55 [10888] [9] DEBUG: protocol_id: 0 = 0x00000000 2009-10-08 11:14:55 [10888] [9] DEBUG: priority_flag: 0 = 0x00000000 2009-10-08 11:14:55 [10888] [9] DEBUG: schedule_delivery_time: NULL 2009-10-08 11:14:55 [10888] [9] DEBUG: validity_period: NULL 2009-10-08 11:14:55 [10888] [9] DEBUG: registered_delivery: 0 = 0x00000000 2009-10-08 11:14:55 [10888] [9] DEBUG: replace_if_present_flag: 0 = 0x00000000 2009-10-08 11:14:55 [10888] [9] DEBUG: data_coding: 0 = 0x00000000 2009-10-08 11:14:55 [10888] [9] DEBUG: sm_default_msg_id: 0 = 0x00000000 2009-10-08 11:14:55 [10888] [9] DEBUG: sm_length: 15 = 0x0000000f 2009-10-08 11:14:55 [10888] [9] DEBUG: short_message: "testing push" 2009-10-08 11:14:55 [10888] [9] DEBUG: short_name: "cr9trial" 2009-10-08 11:14:55 [10888] [9] DEBUG: SMPP PDU dump ends. 2009-10-08 11:14:56 [10888] [9] DEBUG: SMPP[new]: Got PDU: 2009-10-08 11:14:56 [10888] [9] DEBUG: SMPP PDU 0xc7a0fb8 dump: 2009-10-08 11:14:56 [10888] [9] DEBUG: type_name: submit_sm_resp 2009-10-08 11:14:56 [10888] [9] DEBUG: command_id: 2147483652 = 0x80000004 2009-10-08 11:14:56 [10888] [9] DEBUG: command_status: 1031 = 0x00000407 2009-10-08 11:14:56 [10888] [9] DEBUG: sequence_number: 25577 = 0x000063e9 2009-10-08 11:14:56 [10888] [9] DEBUG: message_id: NULL 2009-10-08 11:14:56 [10888] [9] DEBUG: SMPP PDU dump ends. 2009-10-08 11:14:56 [10888] [9] ERROR: SMPP[new]: SMSC returned error code 0x00000407 (Vendor-specific error, please refer to your SMPP provider) in response to submit_sm. [I edit some data] The situation is my telco doing migration system with optional parameter. and they need wireshark data from us From that there is submit_sm (kannel log above), but i can't see submit_sm in wireshark, why this could happen. i have another connection to other port for the same ip and that connection not using any meta data and it work give submit_sm in wireshark. Regards Benjamin
