Hi, I imagine that you are including in your file somewhere your tlv definitions.
Your wireshark capture won't show your submit_sm because you have captured only the receive traffic. I imagine that the SMSc is 202.152.224.18 and your kannel is 202.6.233.43. You only show traffic from the smsc to your kannel. Submit_sm is the opposite way. BR, Nikos ----- Original Message ----- From: Benjamin Heryanto To: [email protected] Sent: Friday, October 09, 2009 2:25 AM Subject: Re: Confuse smpp with tlv Dear Nikos I attach the wire output Regards Benjamin 2009/10/9 Nikos Balkanas <[email protected]> Hi, Could you please attach relevant wireshark output? BR, Nikos ----- Original Message ----- From: Benjamin Heryanto To: [email protected] Sent: Friday, October 09, 2009 1:23 AM Subject: Confuse smpp with tlv Dear list After configure smpp with tlv (using cvs version "Kannel/cvs-20090520") This is my configuration group = smsc smsc = smpp host = xxx.xxx.xxx.xxx port = 10293 smsc-username = a smsc-password = b system-type = tcp smsc-id = new allowed-smsc-id = new transceiver-mode = yes source-addr-ton = 0 source-addr-npi = 1 source-addr-autodetect = no address-range = "" dest-addr-ton = 0 dest-addr-npi = 1 msg-id-type = 0x01 throughput = 1 /etc/kannel/smpp-tlv.conf group = smpp-tlv name = short_name tag = 0x5120 type = octetstring length = 8 group = smpp-tlv name = txid tag = 0x5121 type = integer length = 20 group = smpp-tlv name = conttype tag = 0x5123 type = octetstring length = 20 lynx "http://127.0.0.1:13013/cgi-bin/sendsms?user=new&smsc=new&pass=new&to=234355058673&from=123404&text=testing+push&meta-data=%3Fsmpp%3Fshort_name%3Dcr9trial"; In /var/log/kannel/access.log 2009-10-08 11:14:56 FAILED Send SMS [SMSC:new] [SVC:abc] [ACT:] [BINF:] [FID:] [META:?smpp?short_name=cr9trial] [from:123404] [to:234355058673] [flags:-1:0:-1:-1:-1] [msg:12:testing push] [udh:0:] In /var/log/kannel/kannel.log 2009-10-08 11:14:55 [10888] [32] DEBUG: boxc_receiver: sms received 2009-10-08 11:14:55 [10888] [32] DEBUG: send_msg: sending msg to box: <127.0.0.1> 2009-10-08 11:14:55 [10888] [9] DEBUG: SMPP[new]: Manually forced source addr ton = 0, source add npi = 1 2009-10-08 11:14:55 [10888] [9] DEBUG: SMPP[new]: Manually forced dest addr ton = 0, dest add npi = 1 2009-10-08 11:14:55 [10888] [9] DEBUG: new group created `smpp' 2009-10-08 11:14:55 [10888] [9] DEBUG: group=`smpp' key=`short_name' value=`cr9trial' 2009-10-08 11:14:55 [10888] [9] DEBUG: SMPP[new]: Sending PDU: 2009-10-08 11:14:55 [10888] [9] DEBUG: SMPP PDU 0xc7c0ef0 dump: 2009-10-08 11:14:55 [10888] [9] DEBUG: type_name: submit_sm 2009-10-08 11:14:55 [10888] [9] DEBUG: command_id: 4 = 0x00000004 2009-10-08 11:14:55 [10888] [9] DEBUG: command_status: 0 = 0x00000000 2009-10-08 11:14:55 [10888] [9] DEBUG: sequence_number: 25577 = 0x000063e9 2009-10-08 11:14:55 [10888] [9] DEBUG: service_type: NULL 2009-10-08 11:14:55 [10888] [9] DEBUG: source_addr_ton: 0 = 0x00000000 2009-10-08 11:14:55 [10888] [9] DEBUG: source_addr_npi: 1 = 0x00000001 2009-10-08 11:14:55 [10888] [9] DEBUG: source_addr: "123404" 2009-10-08 11:14:55 [10888] [9] DEBUG: dest_addr_ton: 0 = 0x00000000 2009-10-08 11:14:55 [10888] [9] DEBUG: dest_addr_npi: 1 = 0x00000001 2009-10-08 11:14:55 [10888] [9] DEBUG: destination_addr: "234355058673" 2009-10-08 11:14:55 [10888] [9] DEBUG: esm_class: 3 = 0x00000003 2009-10-08 11:14:55 [10888] [9] DEBUG: protocol_id: 0 = 0x00000000 2009-10-08 11:14:55 [10888] [9] DEBUG: priority_flag: 0 = 0x00000000 2009-10-08 11:14:55 [10888] [9] DEBUG: schedule_delivery_time: NULL 2009-10-08 11:14:55 [10888] [9] DEBUG: validity_period: NULL 2009-10-08 11:14:55 [10888] [9] DEBUG: registered_delivery: 0 = 0x00000000 2009-10-08 11:14:55 [10888] [9] DEBUG: replace_if_present_flag: 0 = 0x00000000 2009-10-08 11:14:55 [10888] [9] DEBUG: data_coding: 0 = 0x00000000 2009-10-08 11:14:55 [10888] [9] DEBUG: sm_default_msg_id: 0 = 0x00000000 2009-10-08 11:14:55 [10888] [9] DEBUG: sm_length: 15 = 0x0000000f 2009-10-08 11:14:55 [10888] [9] DEBUG: short_message: "testing push" 2009-10-08 11:14:55 [10888] [9] DEBUG: short_name: "cr9trial" 2009-10-08 11:14:55 [10888] [9] DEBUG: SMPP PDU dump ends. 2009-10-08 11:14:56 [10888] [9] DEBUG: SMPP[new]: Got PDU: 2009-10-08 11:14:56 [10888] [9] DEBUG: SMPP PDU 0xc7a0fb8 dump: 2009-10-08 11:14:56 [10888] [9] DEBUG: type_name: submit_sm_resp 2009-10-08 11:14:56 [10888] [9] DEBUG: command_id: 2147483652 = 0x80000004 2009-10-08 11:14:56 [10888] [9] DEBUG: command_status: 1031 = 0x00000407 2009-10-08 11:14:56 [10888] [9] DEBUG: sequence_number: 25577 = 0x000063e9 2009-10-08 11:14:56 [10888] [9] DEBUG: message_id: NULL 2009-10-08 11:14:56 [10888] [9] DEBUG: SMPP PDU dump ends. 2009-10-08 11:14:56 [10888] [9] ERROR: SMPP[new]: SMSC returned error code 0x00000407 (Vendor-specific error, please refer to your SMPP provider) in response to submit_sm. [I edit some data] The situation is my telco doing migration system with optional parameter. and they need wireshark data from us From that there is submit_sm (kannel log above), but i can't see submit_sm in wireshark, why this could happen. i have another connection to other port for the same ip and that connection not using any meta data and it work give submit_sm in wireshark. Regards Benjamin
