So what happens if you issue ATE0 at minicom? If all is well, you should get no reply.
Does it work? From: [email protected] [mailto:[email protected]] On Behalf Of sunita abc mittal Sent: Thursday, 05 August, 2010 22:02 To: [email protected] Subject: Re: RE: Problem conneting to modem by Kannel SMS Gateway The same model , is working at another location, The person, who had, configured there, tried to check ours too, But he also couldn't trace any issue. We are trying to setup things again, on other system too. There is Rare chances of Hardware problem as all the AT commands are working using MiniCom. The Server is Lunix RH 5 On Thu, 05 Aug 2010 23:43:57 +0530 wrote > Could possibly be a hardware problem. Did you try another modem? From:[email protected] [mailto:[email protected]] On Behalf Of sunitaabc mittal >Sent: Thursday, 05 August, 2010 20:02 >To: [email protected] >Subject: Re: RE: RE: Re: RE: Problem conneting to modem by Kannel SMSGateway What if you set your speed = 4800 in group = modems? Does thathelp? > - It did n't helped. > >I am not able catch why are the commands not dispatched to Modem. > >I have already checked with the things mentioned in the link you provided. > >Thanks >Sunita Mittal > >On Thu, 05 Aug 2010 01:46:41 +0530 wrote >> Betteryou post this to the Kannel users list. Youmight get better response to it. See: http://docs.google.com/viewer?a=v&q=cache:mUjeu8u4DQIJ:ethesis.nitrkl.ac.in/51/1/10307006.pdf+SIMADO+GDT11+ATE0&hl=en&pid=bl&srcid=ADGEESiVNAcaeJTCsAluNKeUnwM1FmQ7IpqQnsPuyqD-6tirBTlXZVdz9jCDCXUQIBcDQoTkzaO1f54g3O0QYUleGxYyhhbsqz022LAOuYHjpZC_OMRlCOo99S4z53HCIeAFZqXtklN1&sig=AHIEtbT9nQ7RCv0CVgTT7Z1OMxLXYswPHw.Whatif you set your speed = 4800 in group = modems? Does that help? ==Rene From: sunitaabc mittal[mailto:[email protected]] >>Sent: Wednesday, 04 August, 2010 20:39 >>To: [email protected] >>Subject: Re: RE: Re: RE: Problem conneting to modem by KannelSMSGateway Idon't have my log right now, as Its on my office system,But its same to the onegiven below. >> >>which have been reported in thread: >>http://old.nabble.com/forum/ViewPost.jtp?post=29322605&action=pending >> >> >>*After all the setting, I tried to run *bearerbox /etc/kannel.conf >>*Then, it returns the following*: >> >>*2009-04-15 18:24:39 [9679] [0] INFO: Kannel bearerbox II version 1.4.3 >>starting >>2009-04-15 18:24:39 [9679] [0] INFO: Loading store file >>`/var/log/kannel/kannel.store' >>2009-04-15 18:24:39 [9679] [0] INFO: Store-file size 0, starting to unpack >>2009-04-15 18:24:39 [9679] [0] INFO: Retrieved 0 messages, non-acknowledged >>messages: 0 >>2009-04-15 18:24:39 [9679] [8] DEBUG: Thread 8 >>(gw/bb_store_file.c:store_dumper) maps to pid 9679. >>2009-04-15 18:24:39 [9679] [8] DEBUG: Dumping 0 messages to store >>2009-04-15 18:24:39 [9679] [0] DEBUG: Started thread 8 >>(gw/bb_store_file.c:store_dumper) >>2009-04-15 18:24:39 [9679] [0] INFO: MAIN: Start-up done, entering mainloop >>2009-04-15 18:24:39 [9679] [0] DEBUG: AT2[itegno]: start called >>2009-04-15 18:24:39 [9679] [6] DEBUG: AT2[itegno]: device opened. Telnet >>mode = 0 >>2009-04-15 18:24:40 [9679] [6] DEBUG: AT2[itegno]: device opened >>2009-04-15 18:24:40 [9679] [6] INFO: AT2[itegno]: speed set to 115200 >>*2009-04-15 18:24:40 [9679] [6] DEBUG: AT2[itegno]: --> ^M >>2009-04-15 18:24:40 [9679] [6] DEBUG: AT2[itegno]: <-- OK >>2009-04-15 18:24:40 [9679] [6] DEBUG: AT2[itegno]: --> AT^M >>2009-04-15 18:24:40 [9679] [6] DEBUG: AT2[itegno]: <-- OK >>2009-04-15 18:24:40 [9679] [6] DEBUG: AT2[itegno]: --> AT&F^M >>2009-04-15 18:24:40 [9679] [6] DEBUG: AT2[itegno]: <-- OK >>2009-04-15 18:24:40 [9679] [6] DEBUG: AT2[itegno]: --> ATE0^M >>2009-04-15 18:24:44 [9679] [6] ERROR: AT2[itegno]: Couldn't connect >>(retrying in 10 seconds). >>2009-04-15 18:24:54 [9679] [6] DEBUG: AT2[itegno]: detecting modem type >>2009-04-15 18:24:54 [9679] [6] INFO: AT2[itegno]: opening device >>2009-04-15 18:24:54 [9679] [6] WARNING: AT2[itegno]: trying to open device >>with not closed device!!! Please report!!! >>2009-04-15 18:24:54 [9679] [6] INFO: AT2[itegno]: Closing device** >> >> >>Thanks >>Sunita Mittal >> >>On Wed, 04 Aug 2010 20:49:09 +0530 wrote >>> Couldyoupost the relavant part of your bearerbox log files? Sowe can see where itdoeswrong? ==Rene From:[email protected][mailto:[email protected]]on Behalf Of sunitaabc mittal >>>Sent: Wednesday, 04 August, 2010 04:37 >>>To: [email protected] >>>Cc: [email protected] >>>Subject: Re: Re: RE: Problem conneting to modem by KannelSMSGateway Iamusing ·Matrix makeSIMADOGDT11 GSM Modem. Thanks >>>Sunita >>> >>>>On Wed, 04 Aug 2010 01:45:14 +0530 wrote >>>>> Whatkindof modem are you using? From:[email protected][mailto:[email protected]]onbehalf Of sunitaabc mittal >>>>>Sent: Tuesday, 03 August, 2010 21:36 >>>>>To: [email protected] >>>>>Subject: Re: Problem conneting to modem by KannelSMSGateway Hi >>>>> >>>>> please help out. I am totally struck. >>>>> >>>>>Thanks >>>>>Sunita Mittal >>>>> >>>>>On Tue, 03 Aug 2010 09:01:12 +0530 wrote >>>>>>Hello, >>>>>> >>>>>>I am trying to start brearbox , but it startsreconnectionwhilecheckingfor >>>>>>modem Type. >>>>>> >>>>>>AT >>>>>>OK >>>>>>AT&F >>>>>>OK >>>>>>And ATE0 is dispatched, I get message could n'tconnectretrying. >>>>>> >>>>>>I am also attaching the config file. Please help me out. >>>>>> >>>>>> >>>>>>Thanks and Regards >>>>>>Sunita Mittal >>>>>> >>>>>> Image removed by sender. >>>>>> <http://immail.rediff.com/icons/rediff_mail_gold/grayblock.gif> >>>>>Image removed by sender. >>>>Image removed by sender. >>>Image removed by sender. >> <http://www.rediffmail.com/cgi-bin/red.cgi?red=http%3A%2F%2Fwww%2Erediffmail%2Ecom%2Fcgi%2Dbin%2Fred%2Ecgi%3Fred%3Dhttp%253A%252F%252Fsigads%252Erediff%252Ecom%252FRealMedia%252Fads%252Fclick%255Fnx%252Eads%252Fwww%252Erediffmail%252Ecom%252Fsignatureline%252Ehtm%2540Middle%253F%26amp%3BisImage%3D0%26amp%3BBlockImage%3D0&isImage=0&BlockImage=0> >> Error! Filename notspecified. > <http://www.rediffmail.com/cgi-bin/red.cgi?red=http%3A%2F%2Fsigads%2Erediff%2Ecom%2FRealMedia%2Fads%2Fclick%5Fnx%2Eads%2Fwww%2Erediffmail%2Ecom%2Fsignatureline%2Ehtm%40Middle%3F&isImage=0&BlockImage=0> > Error! Filename not specified. <http://sigads.rediff.com/RealMedia/ads/click_nx.ads/www.rediffmail.com/signatureline....@middle?>
