Mitch Bradley wrote:
end_request: I/O error, dev sda, sector 383248
end_request: I/O error, dev sda, sector 382816
end_request: I/O error, dev sda, sector 107510
end_request: I/O error, dev sda, sector 105236
end_request: I/O error, dev sda, sector 107036
That's usually the kind of error you get when you have a bad hard
drive/flash drive, or there's not enough power.
The USB key works fine on an EPIA system running DSL Linux, and also
under Windows with the freeware ext2 fs driver. So I think the drive
hardware is probably okay.
You would think that the powered hub would take care of the power issue.
Also, LinuxBIOS+payload doesn't seem to have any problems while loading
the kernel + initrd from the device.
OK, we'll have to see if we can reproduce and try to spend some time
tracking it down. Not good.
--Chris
_______________________________________________
Devel mailing list
[email protected]
http://mailman.laptop.org/mailman/listinfo/devel
