This is a patch to the cb_pcimdas.c file that fixes up a line over 80 character warning found by the checkpatch.pl tool.
Signed-off-by: Ravishankar Karkala Mallikarjunayya <[email protected]> --- drivers/staging/comedi/drivers/cb_pcimdas.c | 29 +++++++++++++++++++------- 1 files changed, 21 insertions(+), 8 deletions(-) diff --git a/drivers/staging/comedi/drivers/cb_pcimdas.c b/drivers/staging/comedi/drivers/cb_pcimdas.c index 8ba6942..26b082b 100644 --- a/drivers/staging/comedi/drivers/cb_pcimdas.c +++ b/drivers/staging/comedi/drivers/cb_pcimdas.c @@ -96,7 +96,10 @@ struct cb_pcimdas_board { int ao_nchan; /* number of analog out channels */ int ao_bits; /* analogue output resolution */ int has_ao_fifo; /* analog output has fifo */ - int ao_scan_speed; /* analog output speed for 1602 series (for a scan, not conversion) */ + int ao_scan_speed; /* + * analog output speed for 1602 series + * (for a scan, not conversion) + */ int fifo_size; /* number of samples fifo can hold */ int dio_bits; /* number of dio bits */ int has_dio; /* has DIO */ @@ -139,9 +142,12 @@ MODULE_DEVICE_TABLE(pci, cb_pcimdas_pci_table); */ #define thisboard ((const struct cb_pcimdas_board *)dev->board_ptr) -/* this structure is for data unique to this hardware driver. If - several hardware drivers keep similar information in this structure, - feel free to suggest moving the variable to the struct comedi_device struct. */ +/* + * this structure is for data unique to this hardware driver. If + * several hardware drivers keep similar information in this structure, + * feel free to suggest moving the variable to the struct comedi_device + * struct. + */ struct cb_pcimdas_private { int data; @@ -317,7 +323,8 @@ found: s->subdev_flags = SDF_WRITABLE; s->n_chan = thisboard->ao_nchan; s->maxdata = 1 << thisboard->ao_bits; - s->range_table = &range_unknown; /* ranges are hardware settable, but not software readable. */ + /* ranges are hardware settable, but not software readable. */ + s->range_table = &range_unknown; s->insn_write = &cb_pcimdas_ao_winsn; s->insn_read = &cb_pcimdas_ao_rinsn; @@ -400,9 +407,15 @@ static int cb_pcimdas_ai_rinsn(struct comedi_device *dev, outb(d, devpriv->BADR3 + 5); } outb(0x01, devpriv->BADR3 + 6); /* set bursting off, conversions on */ - outb(0x00, devpriv->BADR3 + 7); /* set range to 10V. UP/BP is controlled by a switch on the board */ - - /* write channel limits to multiplexer, set Low (bits 0-3) and High (bits 4-7) channels to chan. */ + outb(0x00, devpriv->BADR3 + 7); /* + * set range to 10V. UP/BP is + * controlled by a switch on the board + */ + + /* + * write channel limits to multiplexer, set Low (bits 0-3) + * and High (bits 4-7) channels to chan. + */ chanlims = chan | (chan << 4); outb(chanlims, devpriv->BADR3 + 0); -- 1.7.0.4 _______________________________________________ devel mailing list [email protected] http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
