A number of the comments in the private data struct definition are causing checkpatch.pl to complain about "WARNING: line over 80 characters". Fix the comments.
Signed-off-by: H Hartley Sweeten <[email protected]> Cc: Ian Abbott <[email protected]> Cc: Frank Mori Hess <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> --- drivers/staging/comedi/drivers/cb_pcidas.c | 31 +++++++++++++++--------------- 1 file changed, 16 insertions(+), 15 deletions(-) diff --git a/drivers/staging/comedi/drivers/cb_pcidas.c b/drivers/staging/comedi/drivers/cb_pcidas.c index eba39b4..9e21e68 100644 --- a/drivers/staging/comedi/drivers/cb_pcidas.c +++ b/drivers/staging/comedi/drivers/cb_pcidas.c @@ -342,34 +342,35 @@ static const struct cb_pcidas_board cb_pcidas_boards[] = { }, }; -/* this structure is for data unique to this hardware driver. If - several hardware drivers keep similar information in this structure, - feel free to suggest moving the variable to the struct comedi_device struct. */ struct cb_pcidas_private { - /* would be useful for a PCI device */ struct pci_dev *pci_dev; - /* base addresses */ + /* base addresses */ unsigned long s5933_config; unsigned long control_status; unsigned long adc_fifo; unsigned long pacer_counter_dio; unsigned long ao_registers; - /* divisors of master clock for analog input pacing */ + /* divisors of master clock for analog input pacing */ unsigned int divisor1; unsigned int divisor2; - unsigned int count; /* number of analog input samples remaining */ - unsigned int adc_fifo_bits; /* bits to write to interrupt/adcfifo register */ - unsigned int s5933_intcsr_bits; /* bits to write to amcc s5933 interrupt control/status register */ - unsigned int ao_control_bits; /* bits to write to ao control and status register */ + /* number of analog input samples remaining */ + unsigned int count; + /* bits to write to registers */ + unsigned int adc_fifo_bits; + unsigned int s5933_intcsr_bits; + unsigned int ao_control_bits; + /* fifo buffers */ short ai_buffer[AI_BUFFER_SIZE]; short ao_buffer[AO_BUFFER_SIZE]; - /* divisors of master clock for analog output pacing */ + /* divisors of master clock for analog output pacing */ unsigned int ao_divisor1; unsigned int ao_divisor2; - unsigned int ao_count; /* number of analog output samples remaining */ - int ao_value[2]; /* remember what the analog outputs are set to, to allow readback */ - unsigned int caldac_value[NUM_CHANNELS_8800]; /* for readback of caldac */ - unsigned int trimpot_value[NUM_CHANNELS_8402]; /* for readback of trimpot */ + /* number of analog output samples remaining */ + unsigned int ao_count; + /* cached values for readback */ + int ao_value[2]; + unsigned int caldac_value[NUM_CHANNELS_8800]; + unsigned int trimpot_value[NUM_CHANNELS_8402]; unsigned int dac08_value; unsigned int calibration_source; }; -- 1.7.11 _______________________________________________ devel mailing list [email protected] http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
