Been running reasonably happily with f7 builds (primarily Joyride 2056). G1G1; Q2D16. When I couldn't stand sitting still any longer, I installed yesterday's Joyride (f9). Ran almost acceptably (needed manual intervention during boot).
One problem I had was that my USB removable storage devices (except for my SD card) were not being recognized, neither by OFW nor by the system drivers. The insoluble problem was that when I installed a build (e.g., Joyride 2089), the first boot would work -- but thereafter every attempt at booting would "stop" somewhere. [If I used the 'check' key to get out of "pretty boot", the booting process would always stop after the console message "Starting anacron:". If I used manual intervention to get to the text console, after the "Starting anacron:" message there would be periodic "msh0: link becomes ready" messages, sometimes interspersed with messages complaining about bad checksums in the jffs2 filesystem -- but sooner or later the XO would just sit there.] My problem is that I do not know if I did something after the first boot to cause this situation, Nor do I know how to "correct" jffs2. Each time the XO would not allow me to boot, I re-flashed the entire nand. Eventually got tired of it - am now back to running f7 builds. mikus _______________________________________________ Devel mailing list [email protected] http://lists.laptop.org/listinfo/devel
