I just updated to 8.2-762 and things seemed to work better with the network connections. I'm about to update to 8.2-763 and hope to get to some more testing tomorrow.
--Chris Ricardo Carrano wrote: > > Have you tried removing your old/previous network configuration? > This can be done in the Control Panel > Network > "Discard network history" > > On Sun, Sep 21, 2008 at 2:10 PM, <[EMAIL PROTECTED]> wrote: >> I recently did a reinstall of 8.2-760 on my >> MP G1G1 XO. The new install seems to be >> very finicky about connecting to my AP: >> >> 1. mesh connect keeps trying and seems >> to stay there with out finishing >> >> 2. clicking on my AP circle in the Neighborhood >> used to stop the mesh and start the AP >> connect process, now the mesh connect >> keeps blinking and the AP always asks for >> the password but then fails to connect. >> >> 3. repeated clicks or waiting for some mins >> eventually gets an AP connection although >> often if the startup is not monitored the >> XO will select mesh and never get to the >> AP >> >> 4. turning on 2 XOs at the same time seems >> to make them both more insistent to get >> a mesh going rather than the AP >> >> 5. suspend and resume can cause this dance >> (nightmare?) to start again... _______________________________________________ Devel mailing list Devel@lists.laptop.org http://lists.laptop.org/listinfo/devel