On Friday 09 April 2010 03:57:50 Adam Wang wrote: > 1, verify if all I/O chips(audio codec, vga encode, ddrram, flash, > midi, dmx512, etc.) connected well to fpga.
I will need time and experiments to put together such a piece of software (and FPGA design). Furthermore, there is currently no logic in the FPGA to drive some parts (USB, Video in, ...) and I will need to develop that. So, for now, I just need a prototype to do this work. We must of course try to get the board 100% correct the first time, but if it still has a few PCB errors, they won't be a show-stopper as I can do SMT rework. > 2, I may directly add Test Points for easy measurement/test purposes > for manufacturer/end user if you won't mind. Ok, this would be a good idea. Just don't put test points on the SDRAM pins, I'm afraid they might degrade the signals and we already have an easy access to them via the termination resistors and the TSOP pins. Thanks, Sébastien _______________________________________________ http://lists.milkymist.org/listinfo.cgi/devel-milkymist.org IRC: #milkym...@freenode Webchat: www.milkymist.org/irc.html Wiki: www.milkymist.org/wiki
