Hi, I am using ISE Webpack 12.1, it's a free of charge download from the Xilinx website.
The JTAG cable is "Platform Cable USB (DLC9/DLC10)". By the way: * I have received the boards today * When powered on, the standby current on 5V is 0.38A - that's high, but no part gets significantly hot or burns. All the voltage levels are measured good. We'll investigate the overcurrent issue later - or maybe you could do that in parallel while I work on the FPGA? * JTAG boundary scan works, the FPGA is detected. * The FPGA can be programmed through JTAG. * A test bitstream that blinks a LED works, which means that the clock is OK too. Regards, Sébastien _______________________________________________ http://lists.milkymist.org/listinfo.cgi/devel-milkymist.org IRC: #milkym...@freenode Webchat: www.milkymist.org/irc.html Wiki: www.milkymist.org/wiki
