Hi, I soldered two boards and all of them works! When insert to my laptop, there are two devices appeared as /dev/ttyUSB0 and /dev/ttyUSB1. It seems that both two ports are worked as serial ports.
What should I do next? Do I need to change or write the driver to support JTAG download? How can I use urjtag? Does urjtag need a special driver or does current driver is good enough now? Also, there is a mechanical problem, the serial port connector (J5) is higher than JTAG's (J6), so I only can connect serial port, I can't insert JTAG. I cut the serial port connector J5 and the female connector on my board a little (about 2mm), then it looks like JTAG can be connected (although my board looks a little lean), I'll try to see if it works. If all the boards are good, I'll solder 5 of them total, I'll keep one, send one to Wolfgang (Adam?) and three of them to Sebastien. Regards, Yanjun Luo. _______________________________________________ http://lists.milkymist.org/listinfo.cgi/devel-milkymist.org IRC: #milkym...@freenode Twitter: www.twitter.com/milkymistvj
