Hi, Could someone provide some hints on installing drivers while running iMPACT? -------------------------------------------------------------------------------------------------- AutoDetecting cable. Please wait. PROGRESS_START - Starting Operation. OS platform = i686. Connecting to cable (Usb Port - USB21). Checking cable driver. File version of /opt/Xilinx/12.3/ISE_DS/ISE/bin/lin/xusbdfwu.hex = 1030. File version of /etc/hotplug/usb/xusbdfwu.fw/xusbdfwu.hex = 1030. Using libusb. Kernel release = 2.6.32-25-generic. Cable connection failed. OS platform = i686. Connecting to cable (Parallel Port - parport0). Linux release = 2.6.32-25-generic. WARNING:iMPACT - Module windrvr6 is not loaded. Please reinstall the cable drivers. See Answer Record 22648. -----------------------------------------------------------------------------------------
So I followed http://www.xilinx.com/support/answers/22648.htm and http://svenand.blogdrive.com/archive/55.html >sudo apt-get install gitk git-gui libusb-dev build-essential fxload After this , I installed drivers below, and got err: a...@adam-laptop:~/m1/install_drivers$ sudo ./install_drivers --Driver versions in this package: windrvr=900, xpc4drvr=1041 --Script name = ./install_drivers --HostName = adam-laptop --Current working dir = /home/adam/m1/install_drivers --Script location = /home/adam/m1/install_drivers --Kernel version = 2.6.32-25-generic. --Arch = i686. --Installer version = 1053 --Unsetting ARCH environment variable. --User has root permission. --File /lib/modules/misc/install_windrvr6 does not exist. --Installing USB drivers------------------------------------------ --File /etc/hotplug/usb/xusbdfwu.fw/xusbdfwu.hex exists. ./setup_pcusb: 191: Bad substitution --File /sbin/fxload exists. --Installing windrvr6--------------------------------------------- --Checking version. --File /lib/modules/2.6.32-25-generic/kernel/drivers/misc/windrvr6.ko does not exist. --File LINUX.2.6.32-25-generic.i386/windrvr6.ko does not exist. --Setting source version to 900. --File LINUX.2.6.32-25-generic.i386/windrvr6.ko is newer than the destination file. loading cache ./config.cache ./configure: 531: Syntax error: "(" unexpected make: *** No rule to make target `clean'. Stop. make: *** No targets specified and no makefile found. Stop. make: *** No rule to make target `install'. Stop. --make windrvr install rc= 2 --install_windrvr6 rc = 2 --Module windrvr6 is not running. --Module xpc4drvr is not running. --Note: By default, the file permission of /dev/windrvr6 is enabled for the root user only and must be changed to allow access to other users. --Return code = 2 But I still got above err, what things I missed? Thanks, Adam
_______________________________________________ http://lists.milkymist.org/listinfo.cgi/devel-milkymist.org IRC: #milkym...@freenode Twitter: www.twitter.com/milkymistvj
