Hi, See > http://www.xilinx.com/support/answers/29310.htm (and specifically NOTE 3) > > You should have the file xusbdfwu.rules in /etc/udev/rules.d/ and the .hex > files > in /usr/share. >
yes, i did follow manually xusbdfwu.rules copied from /ISE_install_dir/bin/lin/xusbdfwu.hex and all xusb*.hex files from /ISE_install_dir/bin/lin/xusb*.hex These instructions in readme.txt from http://git.zerfleddert.de/cgi-bin/gitweb.cgi/usb-driver?a=snapshot;h=HEAD Place the .hex files in /usr/share and the .rule in /etc/udev/rules.d. > > Then the cable's LED should be ON when you plug it, and the cable should > work > in impact (without any further setup). > > Before copied your all files, my all files have been existed there except "85-xusbdfwu.rules". BTW, after overwrote all files, now my two JTAG cables <before ID 03fd:0007, 03fd:0013> is all became <ID 03fd:0008>, and LED light up when plug it. While initialing iMPACT, it indeed still complains about missing windrv6... WARNING:iMPACT - Module parport_pc is not loaded. Please reinstall the cable drivers. See Answer Record 22648. Cable connection failed. PROGRESS_END - End Operation. Elapsed time = 11 sec. Cable autodetection failed. WARNING:iMPACT:923 - Can not find cable, check cable setup ! Next go directly to see if cable actually works regardless of impact console output. :) Thanks, Adam
_______________________________________________ http://lists.milkymist.org/listinfo.cgi/devel-milkymist.org IRC: #milkym...@freenode Twitter: www.twitter.com/milkymistvj
