did you file these wolfgang? We should unlock the knowledge, and break these tasks down so we can even get more people helping on these.
Cheers Jon On Tue, Nov 29, 2011 at 11:20 AM, Wolfgang Spraul <[email protected]> wrote: > On Tue, Nov 29, 2011 at 08:53:28AM +0800, Jon Phillips wrote: >> Ideally could pull down from the web or usb stick. > > From those two, pulling from the web is easier to implement I think. > Here's what I know about USB sticks now: > > M1 would require reliable USB full-speed support, that's a difficult > problem with both Sebastien and Werner spending some time currently > to try to get this working better. > > After that, we would need support for block transfers and storage > devices, a lot of code in the USB stack. So either this exists already > in RTEMS, or if not then realistically it could only work after > Flickernoise switched to Linux on M1, without loosing functionality. > That in turn would probably require work on an MMU and more time on > the Linux kernel (device drivers etc). > > So all paths to make USB sticks work on M1 are not easy, but I think > we should still openly talk about what we know and invite newcomers to > join and help us. > > I'd say this will take a year :-) > Cheers, > Wolfgang > _______________________________________________ > http://lists.milkymist.org/listinfo.cgi/devel-milkymist.org > IRC: #milkymist@Freenode -- Jon Phillips 王✳爻气 http://fabricatorz.com ✳ skype: kidproto ✳ irc: rejon +1.415.830.3884 (global) ✳ +86-187-1003-9974 (beijing) _______________________________________________ http://lists.milkymist.org/listinfo.cgi/devel-milkymist.org IRC: #milkymist@Freenode
