Hello List,
is it just me or is 11s broken in the latest compat-wireless?
I tried with 2010-03-03 and an earlier release, in both versions Peering
links do not establish (compat-wireless-2010-02-02 was fine).
"iw <interfae> station dump" shows
Station xx:xx:xx:xx:xx:xx (on mesh)
inactive time: 270 ms
rx bytes: 5019
rx packets: 157
tx bytes: 7614
tx packets: 135
signal: -20 dBm
tx bitrate: 6.0 MBit/s
mesh llid: 0
mesh plid: 0
mesh plink: LISTEN
The plink status stays HOLDING, LISTEN or OPN_SNT, but does not reach ESTAB.
Since no peering links are established, no further cummunication is
possible (except for ARP).
The mesh config should be fine, since it is the same script i used in
earlier versions.
Regards
Marco
_______________________________________________
Devel mailing list
[email protected]
http://open80211s.com/mailman/listinfo/devel
