Javier Cardona schrieb:
> Hi Marco,
>
> On Thu, Mar 11, 2010 at 3:21 AM, Marco Porsch <[email protected]>
> wrote:
>
>> is it just me or is 11s broken in the latest compat-wireless?
>> I tried with 2010-03-03 and an earlier release, in both versions Peering
>> links do not establish (compat-wireless-2010-02-02 was fine).
>>
>> "iw <interfae> station dump" shows
>>
>> Station xx:xx:xx:xx:xx:xx (on mesh)
>> inactive time: 270 ms
>> rx bytes: 5019
>> rx packets: 157
>> tx bytes: 7614
>> tx packets: 135
>> signal: -20 dBm
>> tx bitrate: 6.0 MBit/s
>> mesh llid: 0
>> mesh plid: 0
>> mesh plink: LISTEN
>>
>> The plink status stays HOLDING, LISTEN or OPN_SNT, but does not reach ESTAB.
>> Since no peering links are established, no further cummunication is
>> possible (except for ARP).
>> The mesh config should be fine, since it is the same script i used in
>> earlier versions.
>>
>
> Did you upgrade all your mesh nodes to 2010-03-03 or just one? I'm
> trying to determine where to start troubleshooting this.
>
> Cheers,
>
> Javier
>
>
are there any news on this?
Can someone confirm that this is a general problem or just OpenWrt
specific? Because I forgot to mention, I am using OpenWrt...
_______________________________________________
Devel mailing list
[email protected]
http://open80211s.com/mailman/listinfo/devel
