Hi, Did some thorough throughput testing, here are my setup :
1) Processor : PowerQuicc2 Pro MPC8315E 2) Clock speed : 400 MHz. 3) Running buildroot linux for powerpc. 4) WLAN card : Mini-PCI Atheros AR9160 5) Channel 36 6) Channel Type : HT40+ 7) Rate control algorithm used : 11n Minstrel 8) Testing method : Wireless Here are my results : With AuthSAE : 10 parallel iperf summed up to *14.5 Mbps* (max i can achieved) Without AuthSAE : 10 parallel iperf summed up to* 62 Mbps* (max i can achieved) The Tx Bitrate reported is around 65 - 300 Mbps. Done the tests on 3 boards with consistent result. Just concern that are these considered the correct expected output for Meshput release?. Is there any aggregated PDU setting that i can try with? Thanks & Rgds, Zaki.
_______________________________________________ Devel mailing list [email protected] http://open80211s.com/mailman/listinfo/devel
