Hi I am a little newbie with compat-wireless...^^ How can upgrade my compat-wireless version of my M5 with openwrt? I`ve tried build in compat-wireless-3.1.1-1.tar.bz2 my laptop but I`ve got some problems to build it with my laptop's kernel, and I am confused between the version of the kernel of my laptop and the version of the kernel for the Nanostation M5.What version of compat-wireless should I build?How could I add to my openwrt version? Any help or link with a Howto?
Thanks!! Regards Esteban 2012/8/17 Thomas Pedersen <[email protected]>: > Hi Esteban, > > On Fri, Aug 17, 2012 at 10:33 AM, Esteban Municio <[email protected]> wrote: >> In nanostation 5: >> root@OpenWrt:/# cat /sys/module/compat/parameters/compat_version >> compat-wireless-2012-07-13 >> >> In nanostation m5: >> root@OpenWrt:/# cat /sys/module/compat/parameters/compat_version >> compat-wireless-2011-11-29 > > So 5 will choose the manadatory phy rates as BSSBasicRateSet and > validate potential peers on whether this set matches. m5 will have > some other default BSSBasicRateSet. Try upgrading the compat-wireless > on m5 to 2012-7-13 as well. > >> I do not know how to see directly the beacons, can I use iw phy o some >> similar? > > I mean on a sniffer. > > Thomas > _______________________________________________ > Devel mailing list > [email protected] > http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel -- Esteban _______________________________________________ Devel mailing list [email protected] http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel
