Chun-Yeow, Thanks for the suggestion, but there's no luck here…
root@gh3:~# iw phy0 interface add mesh0 type mp root@gh3:~# iw mesh0 set channel 11 root@gh3:~# ifconfig mesh0 192.168.100.23 netmask 255.255.255.0 root@gh3:~# ifconfig mesh0 up root@gh3:~# iw mesh0 mesh join mymesh root@gh3:~# iw mesh0 mpath dump Dest Next/Gate Iface Flags SN Metric Qlen root@gh3:~# sleep 60 root@gh3:~# iw mesh0 mpath dump Dest Next/Gate Iface Flags SN Metric Qlen root@gh3:~# iw phy0 interface add mon0 type monitor root@gh3:~# iw mesh0 mpath dump Dest Next/Gate Iface Flags SN Metric Qlen root@gh3:~# ifconfig mon0 up root@gh3:~# iw mesh0 mpath dump Dest Next/Gate Iface Flags SN Metric Qlen 4c:e6:76:44:9a:e8 4c:e6:76:97:d7:1 mesh0 ARS 174780 17250 0 4c:e6:76:a9:5b:9d <direct> mesh0 ARS 150900 8193 0 4c:e6:76:44:9a:d5 <direct> mesh0 AGTRS 328839 8193 0 4c:e6:76:44:9b:a 4c:e6:76:97:d7:1 mesh0 ARS 32539 8421 0 0:1:8e:10:bc:79 <direct> mesh0 ARS 308552 8193 0 4c:e6:76:aa:51:a8 <direct> mesh0 ARS 81618 8193 0 4c:e6:76:97:d7:1 <direct> mesh0 ARS 131398 8193 0 4c:e6:76:44:9b:4 <direct> mesh0 ATS 97623 8193 0 4c:e6:76:44:9a:d6 4c:e6:76:44:9a:d5 mesh0 P a:0:27:0:0:0 0:1:8e:10:bc:79 mesh0 P 4c:e6:76:44:9a:d5 <direct> mesh0 AgTRS 328839 8193 0 root@gh3:~# --- shinoda On 2012/08/30, at 0:44, Yeoh Chun-Yeow wrote: > Hi, Shinoda > > Up the mesh interface before joining the mesh network. > > Like this: >> # ifconfig mesh0 up >> # iw mesh0 mesh join mymesh > > --- > Chun-Yeow > > On Wed, Aug 29, 2012 at 8:21 PM, LEO Airwarosu Yoichi Shinoda > <[email protected]> wrote: >> >> With OpenWrt r33276 (compat-wireless-2012-07-13), >> Buffalo WZR-HP-G300NH (AR9132) does not start a mesh >> until an adjacent monitor interface is created and brought up. >> >> For example, let's consider a mesh interface mesh0. >> >> # iw phy0 interface add mesh0 type mp >> # iw mesh0 set channel 11 >> # iw mesh0 mesh join mymesh >> # ifconfig mesh0 up >> >> I need to issue following additional commands before >> the mesh is actually capable of seeing the interface, >> or the interface seeing the mesh. >> >> # iw phy0 interface add mon0 type monitor >> # ifconfig mon0 up >> >> Where do I start looking? >> >> Oh, BTW, the WSoC is identified as >> >> [ 8.100000] ieee80211 phy0: Atheros AR9100 MAC/BB Rev:7 AR2133 RF Rev:a2 >> mem=0xb80c0000, irq=2 >> >> --- shinoda >> >> _______________________________________________ >> Devel mailing list >> [email protected] >> http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel > _______________________________________________ > openwrt-devel mailing list > [email protected] > https://lists.openwrt.org/mailman/listinfo/openwrt-devel _______________________________________________ Devel mailing list [email protected] http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel
