Thomas, I was preparing some trace/log data for you, but Chun-Yeow's suggestion did the trick.
Thank you very much anyway. --- shinoda On 2012/08/30, at 6:39, Thomas Pedersen wrote: > On Wed, Aug 29, 2012 at 5:21 AM, LEO Airwarosu Yoichi Shinoda > <[email protected]> wrote: >> >> With OpenWrt r33276 (compat-wireless-2012-07-13), >> Buffalo WZR-HP-G300NH (AR9132) does not start a mesh >> until an adjacent monitor interface is created and brought up. >> >> For example, let's consider a mesh interface mesh0. >> >> # iw phy0 interface add mesh0 type mp >> # iw mesh0 set channel 11 >> # iw mesh0 mesh join mymesh >> # ifconfig mesh0 up >> >> I need to issue following additional commands before >> the mesh is actually capable of seeing the interface, >> or the interface seeing the mesh. >> >> # iw phy0 interface add mon0 type monitor >> # ifconfig mon0 up >> >> Where do I start looking? > > Is the card even beaconing before the monitor interface comes up? Are > peering frames transmitted? What does station dump show before > starting mon0? A capture during this period would also be useful. > > Thomas > _______________________________________________ > Devel mailing list > [email protected] > http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel _______________________________________________ Devel mailing list [email protected] http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel
