Hello I have been testing the Authsae with ath5k and ath9k. Everything with ath9k is working great, encryption and speed. But I have not been able to establish a encrypted mesh with the ath5k cards. I have tried the nohwcrypt=1 and other patches sent up to the list but no luck. I did notice another error when Authsae is trying to connect with another node. Maybe it will help. (or maybe not)
I have been following the http://www.spinics.net/lists/linux-wireless/msg96505.html list for a while to see if anyone else had this error. Node 1 shows this error half way through Unexpected error -67 (expected -107) NL80211_CMD_NEW_PEER_CANDIDATE(1136395638.495356) new unauthed sta (seq num=1136395655) NL80211_CMD_NEW_STATION (1136395638.496356) NL80211_CMD_FRAME (1136395639.111262) then I get Mesh plink: incorrect plink ie length 3 6 Node 2 shows this error at the end estab with 00:14:6d:94:6e:6f set auth flag (seq num=1136075917) set plink state (seq num=1136075918) mesh plink with 00:14:6d:94:6e:6f established Unexpected error -22 (expected -107) nlerror, cmd 11, seq 1136075915: Invalid argument Mesh plink timer for 00:14:6d:94:6e:6f fired on state ESTAB Timeout for peer 00:14:6d:94:6e:6f in state 4 According to Javiers information Cmd 11 is NL80211_CMD_NEW_KEY, and the kernel seems to be rejecting it. The invalid argument error is -EINVAL, which could be raised by cfg80211_validate_key_settings (see Yeoh's patch). authsae will install 3 keys for each newly established peer. See estab_peer_link, in meshd-nl80211.c I tried commenting out different area's of the meshd-nl80211.c as suggested but no luck. Incorrect plink ie length 3 6 This is reported by authsae: a PLINK_CLOSE IE is received of size 6 bytes. Should be 22 or 24 bytes (see ampe.c:942). My question is what is Unexpected error -67 (expected -107) maybe it will me or someone else with the same issue. Thanks Fred > _______________________________________________ > Devel mailing list > [email protected] > http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel >
_______________________________________________ Devel mailing list [email protected] http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel
