> > Thanks you. I can configure the node in mesh point. But I still have the
> > same problem when I execute the instruction "sudo iw dev mesh0 mesh join
> > MyMeshNet" (it doesn't work and iw help appears in the console).
>
> Are you able to redo everything again?
>
> Let us know what's the command step-by-step that you have executed.
>
The command step-by-step is:
sudo stop network-manager
sudo iw dev wlan0 interface add mesh0 type mp
ifconfig -a | grep mesh0
sudo iw dev mesh0 set channel 2
ifconfig mesh0
sudo ifconfig mesh0 192.168.0.30
sudo iw dev mesh0 mesh join MyMeshNet
Then, when I execute this last instruction, iw help appears in the console (it
seems there is some problem with input parameters in iw command) .
I remind you that I want to create a mesh network consisting of 3 Pentium PCs,
and each PC has an Atheros AR9285 wireless communication card and operating
system Ubuntu 11.10 is installed on them.
Víctor
_______________________________________________
Devel mailing list
[email protected]
http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel
