What is the version of iw that you are using? Please confirm whether iw command with mesh join is there.
Thanks --- Chun-Yeow On Wed, Sep 26, 2012 at 4:55 PM, Víctor ... <[email protected]> wrote: > >> > Thanks you. I can configure the node in mesh point. But I still have the >> > same problem when I execute the instruction "sudo iw dev mesh0 mesh join >> > MyMeshNet" (it doesn't work and iw help appears in the console). >> >> Are you able to redo everything again? >> >> Let us know what's the command step-by-step that you have executed. >> > > The command step-by-step is: > > sudo stop network-manager > > sudo iw dev wlan0 interface add mesh0 type mp > > ifconfig -a | grep mesh0 > > sudo iw dev mesh0 set channel 2 > > ifconfig mesh0 > > sudo ifconfig mesh0 192.168.0.30 > > sudo iw dev mesh0 mesh join MyMeshNet > > Then, when I execute this last instruction, iw help appears in the console > (it seems there is some problem with input parameters in iw command) . > > I remind you that I want to create a mesh network consisting of 3 Pentium > PCs, and each PC has an Atheros AR9285 wireless communication card and > operating system Ubuntu 11.10 is installed on them. > > Víctor > > _______________________________________________ > Devel mailing list > [email protected] > http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel > _______________________________________________ Devel mailing list [email protected] http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel
