I will look into the authsae debug to coordinate it with the XXX dmesg debug and send back the results.
Chun-yeow this occurs on both xr5 and xr9 cards, i have also tested it with a none ubiquity cm9 card and the results are the same. Fred On Monday, October 15, 2012, Bob Copeland <[email protected]> wrote: > On Sat, Oct 13, 2012 at 02:18:35AM -0400, fred veldini wrote: >> # dmesg |grep XXX >> >> [ 562.522664] XXX: tx frame with 0 rates! >> [ 562.522674] XXX: skbp: dcb2a2c0 >> [ 562.522682] XXX txinfo: 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 >> 00 00 00 ................ >> [ 562.522688] XXX txinfo: 00000010: 00 00 00 00 00 00 00 00 54 b8 f2 db 00 >> 00 00 00 ........T....... >> [ 562.522693] XXX txinfo: 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 >> 00 00 00 ................ >> [ 562.522699] XXX: frame: 00000000: d0 00 00 00 ff ff ff ff ff ff 00 15 6d >> 94 5a 39 ............m.Z9 >> [ 562.522705] XXX: frame: 00000010: 00 15 6d 94 5a 39 00 00 0d 01 84 0f 1f >> 01 ..m.Z9........ > > I haven't had a chance to look into this with any detail (and may not > for a few days) -- but this dump is showing that some action frames sent > by authsae are sent with an invalid rate set. I believe the 0xdbf2b854 in > the txinfo dump is a vif pointer while everything else is zeroed out. > > -- > Bob Copeland %% www.bobcopeland.com > _______________________________________________ > Devel mailing list > [email protected] > http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel >
_______________________________________________ Devel mailing list [email protected] http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel
