I'm working in OpenWRT Attitude Adjustment beta 2 on a the PicoStation
2HP (ath5k).
I can't seem to bring up a mesh interface successfully. It looks like it
works:
root@OpenWrt:~# iw phy phy0 interface add mesh0 type mp mesh_id ayrmesh
root@OpenWrt:~# ifconfig mesh0
mesh0 Link encap:Ethernet HWaddr 00:15:6D:7C:BB:1C
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:32
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
root@OpenWrt:~# iw mesh0 info
Interface mesh0
ifindex 7
wdev 0x4
addr 00:15:6d:7c:bb:1c
type mesh point
wiphy 0
channel 11 (2462 MHz) NO HT
But the radio never comes on. I have a laptop running Kismet and some
PicoStation M2s (I like Ubiquiti...) running just fine. So I know what
it looks like when the mesh i/f comes up (it creates a "no ssid" AP on
Kismet), and nothing comes up from the PicoStation 2HPs.
I can create a normal AP on the 2HPs, it's just the mesh that's not
working (hence the mail to this list).
Any ideas?
--
Bill Moffitt
Ayrstone Productivity
http://www.ayrstone.com
_______________________________________________
Devel mailing list
[email protected]
http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel
