Hi Bill, On Tue, Nov 20, 2012 at 2:46 PM, Bill Moffitt <[email protected]> wrote: > I'm working in OpenWRT Attitude Adjustment beta 2 on a the PicoStation 2HP > (ath5k). > > I can't seem to bring up a mesh interface successfully. It looks like it > works: > > root@OpenWrt:~# iw phy phy0 interface add mesh0 type mp mesh_id ayrmesh > root@OpenWrt:~# ifconfig mesh0 > mesh0 Link encap:Ethernet HWaddr 00:15:6D:7C:BB:1C > BROADCAST MULTICAST MTU:1500 Metric:1
Apparently the interface is still down. Can you try: ip link set mesh0 up or ifconfig mesh0 up Cheers, Javier > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:32 > RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) > > root@OpenWrt:~# iw mesh0 info > Interface mesh0 > ifindex 7 > wdev 0x4 > addr 00:15:6d:7c:bb:1c > type mesh point > wiphy 0 > channel 11 (2462 MHz) NO HT > > But the radio never comes on. I have a laptop running Kismet and some > PicoStation M2s (I like Ubiquiti...) running just fine. So I know what it > looks like when the mesh i/f comes up (it creates a "no ssid" AP on Kismet), > and nothing comes up from the PicoStation 2HPs. > > I can create a normal AP on the 2HPs, it's just the mesh that's not working > (hence the mail to this list). > > Any ideas? > > -- > Bill Moffitt > Ayrstone Productivity > http://www.ayrstone.com > > _______________________________________________ > Devel mailing list > [email protected] > http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel -- Javier Cardona cozybit Inc. http://www.cozybit.com _______________________________________________ Devel mailing list [email protected] http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel
