I have a question about the tx / rx parameters.
The tx/rx bitrates on a 2 node mesh are inconsistant and the performance is
slow
Im running build o11s-stable-v3.10.9 with the latest IW Command
Is this a known issue? or Is there a patch I should try.
Node 1
Station xx:xx:xx:xx:xx:02 (on mesh0)
inactive time: 10 ms
rx bytes: 8149
rx packets: 37
tx bytes: 4871
tx packets: 26
tx retries: 58
tx failed: 0
signal: -40 dBm
signal avg: -40 dBm
Toffset: -966168513 us
tx bitrate: 130.0 MBit/s MCS 15
rx bitrate: 48.0 MBit/s
mesh llid: 0
mesh plid: 0
mesh plink: ESTAB
mesh local PS mode: ACTIVE
mesh peer PS mode: ACTIVE
mesh non-peer PS mode: ACTIVE
authorized: yes
authenticated: yes
preamble: long
WMM/WME: yes
MFP: yes
TDLS peer: no
Node 2
Station xx:xx:xx:xx:xx:01 (on mesh0)
inactive time: 3 ms
rx bytes: 54111184
rx packets: 170157
tx bytes: 24598462
tx packets: 97148
tx retries: 55838
tx failed: 0
signal: -43 dBm
signal avg: -44 dBm
Toffset: 966169203 us
tx bitrate: 48.0 MBit/s
rx bitrate: 130.0 MBit/s MCS 15
mesh llid: 0
mesh plid: 0
mesh plink: ESTAB
mesh local PS mode: ACTIVE
mesh peer PS mode: ACTIVE
mesh non-peer PS mode: ACTIVE
authorized: yes
authenticated: yes
preamble: long
WMM/WME: yes
MFP: yes
TDLS peer: no
_______________________________________________
Devel mailing list
[email protected]
http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel
