Hi, let's first make sure it is not only your channel that has fluctuations. Do you have the same behavior when using an AP-client link?
Also the information in the station dump only shows the current link situation, but not the whole picture. For more details you can have a look at the rate control stats file in debugfs [1] (if you are using ath9k). So first transfer some MByte of data, then check the rc_stats output and maybe post it here to verify. Best regards, --Marco [1] http://wireless.kernel.org/en/developers/Documentation/mac80211/RateControl/minstrel#DebugFs_contents Am 17.10.2013 05:27, schrieb fred veldini: > I have a question about the tx / rx parameters. > The tx/rx bitrates on a 2 node mesh are inconsistant and the performance is > slow > Im running build o11s-stable-v3.10.9 with the latest IW Command > Is this a known issue? or Is there a patch I should try. > > Node 1 > Station xx:xx:xx:xx:xx:02 (on mesh0) > inactive time: 10 ms > rx bytes: 8149 > rx packets: 37 > tx bytes: 4871 > tx packets: 26 > tx retries: 58 > tx failed: 0 > signal: -40 dBm > signal avg: -40 dBm > Toffset: -966168513 us > tx bitrate: 130.0 MBit/s MCS 15 > rx bitrate: 48.0 MBit/s > mesh llid: 0 > mesh plid: 0 > mesh plink: ESTAB > mesh local PS mode: ACTIVE > mesh peer PS mode: ACTIVE > mesh non-peer PS mode: ACTIVE > authorized: yes > authenticated: yes > preamble: long > WMM/WME: yes > MFP: yes > TDLS peer: no > > Node 2 > Station xx:xx:xx:xx:xx:01 (on mesh0) > inactive time: 3 ms > rx bytes: 54111184 > rx packets: 170157 > tx bytes: 24598462 > tx packets: 97148 > tx retries: 55838 > tx failed: 0 > signal: -43 dBm > signal avg: -44 dBm > Toffset: 966169203 us > tx bitrate: 48.0 MBit/s > rx bitrate: 130.0 MBit/s MCS 15 > mesh llid: 0 > mesh plid: 0 > mesh plink: ESTAB > mesh local PS mode: ACTIVE > mesh peer PS mode: ACTIVE > mesh non-peer PS mode: ACTIVE > authorized: yes > authenticated: yes > preamble: long > WMM/WME: yes > MFP: yes > TDLS peer: no > > > > _______________________________________________ > Devel mailing list > [email protected] > http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel > _______________________________________________ Devel mailing list [email protected] http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel
