Are you able to share the 802.11 chipset that you used for testing? ---- Chun-Yeow
On Fri, Nov 28, 2014 at 1:37 AM, Cedric Debarge via Devel <[email protected]> wrote: > Hi all, > > I am using 2 mesh gates (openwrt) and encounter some problems using authsae. > > The problem is that I'm not able to communicate between devices. See config in > notes below. One device is already started and beacons correctly. > > Launching meshd on the other device with debugs reveals that 2 > NL80211_CMD_SET_STATION failed (invalid argument) during the startup sequence > : > NL80211_CMD_SET_STATION in new_unauthenticated_peer => NOK > =>nlerror, cmd 18, seq 1416576729: Invalid argument > NL80211_CMD_SET_STATION in set_plink_state (state=0) => OK > NL80211_CMD_SET_STATION in set_plink_state (state=1) => OK > NL80211_CMD_SET_STATION in set_plink_state (state=2) => OK > NL80211_CMD_SET_STATION in set_plink_state (state=4) => OK > NL80211_CMD_SET_STATION in set_authenticated_flag => OK > NL80211_CMD_SET_STATION in set_supported_rates => NOK > =>nlerror, cmd 18, seq 1416576741: Invalid argument > > I did not investigated the second error, but the first one is rejected by > cfg80211_check_station_change inside mac80211 when it checks the supported > rates: > > if (params->supported_rates) <= this test returns true > return -EINVAL; > > After this sequence, I am not able to communicate through the mesh network. > > An air capture of the sequence shows a bunch of malformed packet > (see attached pcap file). The errors above were observed on > the 92:a4:de:aa:42:65 device. > > Do you have any pointer that might allow me to make thing work ? > > Thanks in advance, > Cédric > > configs: > > Kernel 3.3.8 > Compat Wireless : 2014-09-26 > Authsae : (from github) : 8531ab158910a525d4bcbb3ad02c08342f6987f2 > > the mesh interface is bridged with an Ethernet interface: > #brctl show > bridge name bridge id STP enabled interfaces > br-lan 7fff.000990002c25 no eth0 > > wlan0 > > authsae-radio0w0.conf: > { > debug = 1; > password = "cdmytest"; > group = [19, 26, 21, 25, 20]; > blacklist = 5; > thresh = 5; > lifetime = 3600; > }; > meshd: > { > meshid = "cdtest"; > interface = "wlan0"; > passive = 0; > debug = 1; > mediaopt = 1; > band = "11a"; > channel = 132; > htmode = "HT20"; > hwmp-rootmode = 0 > }; > }; > > > _______________________________________________ > Devel mailing list > [email protected] > http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel > _______________________________________________ Devel mailing list [email protected] http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel
