Werner, Phil.
Werner Almesberger wrote: > Philip Rhoades wrote: >> Can't get it to boot with wlan-trial-20090206.uImage at the moment . . > > Strange. I retried again (kernel and rootfs in NAND) and it works just > fine for me. I.e., you should be able to log in through USB about a > minute after booting. Trying to setup the connection from the desktop machine I get: iptables -A POSTROUTING -t nat -j MASQUERADE -s 192.168.0.0/24 sysctl -w net.ipv4.ip_forward=1 net.ipv4.ip_forward = 1 ifconfig usb0 192.168.0.200 netmask 255.255.255.248 SIOCSIFADDR: No such device usb0: unknown interface: No such device SIOCSIFNETMASK: No such device SIOCGIFADDR: No such device SIOCSIFBROADCAST: No such device - the USB device is not visible it seems . . > If you bring up the u-boot boot menu and boot from there, does the > output on the LCM shed any light on the issue ? Using "Boot" I see "Reading from data" and numbers clicking over but it just goes back to the menu after that. If I use reboot, I get the hanging problem. > BTW, what do you > normally use - Qi or u-boot ? I have never installed Qi so it must be u-boot - should I install Qi? Thanks, Phil. -- Philip Rhoades GPO Box 3411 Sydney NSW 2001 Australia E-mail: p...@pricom.com.au _______________________________________________ devel mailing list devel@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/devel
