Philip Rhoades wrote: > - the USB device is not visible it seems . . Aah, I just realized what's wrong. Your u-boot must still have the short kernel size setting. This prevents kernels build with "moredrivers" from booting.
To fix this, - bring up the boot menu of NAND u-boot - switch the console to USB - enter the u-boot command line with neocon /dev/ttyACM{0,1,2} (or use the serial communication program of your choice) - enter the following two commands: setenv bootcmd setenv bootargs \${bootargs_base} \${mtdparts}\; nand read.e 0x32000000 kernel 0x300000\; bootm 0x32000000 saveenv - you can now boot with boot The change is persistent, so you'll be able to boot large kernels from now on. A small drawback of this change is that loading the kernel now takes a little bit longer. See also http://lists.openmoko.org/pipermail/openmoko-kernel/2008-October/006086.html > I have never installed Qi so it must be u-boot - should I install Qi? You don't need to install Qi for this. Thanks, - Werner _______________________________________________ devel mailing list devel@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/devel