Werner,
Werner Almesberger wrote:
Philip Rhoades wrote:
I then setup wireless networking and run my script for testing LAN
connection - it has now been running for nearly 26 hours! (and is still
going) - about 10 hours longer than the previous record!
Cool !
It finally failed at about 30 hours.
The question is was this just a lucky test
I'd say, once we see a 10x difference to your average update (that
would be something like 10 hours ?), then I'll slowly start to
believe it's not just Murphy being busy to bring mischief to
someone else ;-)
Is the rest of the system behaving normally ?
When I am running the test I am usually not using the FR for anything
else - maybe just some terminal stuff.
that is allowing the much improved uptime?
Hmm, there are three charger changes to WLAN:
- SIOCGIWSCAN no longer returns an error if it doesn't find an AP.
That may keep user space from unnecessarily entering panic mode.
- the addition of rfkill. Don't see how this one could affect it,
though.
- the "shot in the dark" for SDIO communication. If this does
anything, the kernel prints either
READ WHILE BUSY !
or
WRITE WHILE BUSY !
Do you see any of these in dmesg ?
Oddly, after it had failed, I restarted the network and it failed again
in about a minute. I then started it again and copied the attached
files over FYI - no "BUSY" in dmesg output . .
Phil.
--
Philip Rhoades
GPO Box 3411
Sydney NSW 2001
Australia
E-mail: p...@pricom.com.au
828.795000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106828.795000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106828.795000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106828.795000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106828.795000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106828.795000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106828.795000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106828.795000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106828.795000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106828.795000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106828.795000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106828.795000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106828.795000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106828.795000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106828.795000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106828.795000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106828.795000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106828.795000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106828.795000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106828.795000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106828.795000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106828.795000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106828.795000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106828.795000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106828.795000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106828.795000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106828.795000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106828.795000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106828.795000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106828.795000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106828.795000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106828.795000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106828.795000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106828.795000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106828.795000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106828.795000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106828.795000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106828.795000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106828.795000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106828.795000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106828.795000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106828.800000] Host does not want target reset.
[106828.990000] -ar6000_destroy
[106828.990000] mmc1: card 0001 removed
[106829.035000] ar6000_wow interrupt
[106829.195000] s3c2440-sdi s3c2440-sdi: powered down.
[106829.195000] s3c2440-sdi s3c2440-sdi: powered down.
[106832.635000] s3c2440-sdi s3c2440-sdi: host detect has no irq available
[106832.635000] mapped channel 0 to 0
[106832.635000] regulator: Unable to get requested regulator: SD_3V3
[106832.640000] s3c2440-sdi s3c2440-sdi: Regulator for SD_3V3 unavilable
[106832.665000] s3c2440-sdi s3c2440-sdi: powered down.
[106832.665000] s3c2440-sdi s3c2440-sdi: running at 0kHz (requested: 0kHz).
[106832.665000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
[106832.670000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
[106832.675000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
[106832.685000] s3c2440-sdi s3c2440-sdi: initialisation done.
[106832.690000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
[106832.705000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
[106832.720000] mmc1: queuing CIS tuple 0x01 length 3
[106832.760000] mmc1: queuing CIS tuple 0x1a length 5
[106832.795000] mmc1: queuing CIS tuple 0x1b length 8
[106832.800000] s3c2440-sdi s3c2440-sdi: running at 25000kHz (requested:
25000kHz).
[106832.800000] s3c2440-sdi s3c2440-sdi: running at 25000kHz (requested:
25000kHz).
[106832.810000] mmc1: queuing CIS tuple 0x80 length 1
[106832.810000] mmc1: queuing CIS tuple 0x81 length 1
[106832.810000] mmc1: queuing CIS tuple 0x82 length 1
[106832.810000] mmc1: new SDIO card at address 0001
[106832.865000] ar6000_available
[106833.860000] BMI Get Target Info: Exit (ver: 0x20000059 type: 0x1)
[106833.860000] Block Size Set: 128 (target address:0x8000066C)
[106833.860000] eth0 (sdio_ar6000): not using net_device_ops yet
[106833.860000] ar6000_init() Got WMI @ 0xc79f0600.
[106833.910000] mac address = 00:12:cf:8e:ef:27
[106833.910000] AR6000 Reg Code = 0x40000060
[106833.910000] ar6000_init() WMI is ready
[106833.980000] ar6000_avail: name=eth0 htcTarget=0xc69a0000, dev=0xc699e000
(0), ar=0xc699e460
[106834.410000] Connect called with authmode 1 dot11 auth 1 PW crypto 1 PW
crypto Len 0 GRP crypto 1 GRP crypto Len 0
[106834.420000] AR6000 disconnected
[106834.420000]
[106834.420000] Disconnect Reason is 3
[106834.420000] Protocol Reason/Status Code is 0
[106834.420000] AssocResp Frame = NULL
[106835.740000] AR6000 connected event on freq 2472 with bssid
00:1c:10:09:8e:32 listenInterval=100, beaconInterval = 100, beaconIeLen = 0
assocReqLen=29 assocRespLen =22
[106835.740000] Network: Infrastructure
[106835.740000]
[106835.740000] AssocRespIEs= 01 08 82 84 8b 96 0c 18 30 48 32 04 12 24 60 6c
[106835.740000] AssocReqIEs= 00 07 6c 69 6e 6b 73 79 73 01 08 82 84 8b 0c 12 96
18 24 32 04 30 48 60 6c
[106838.745000] AR6000 scan complete: 0
[106838.745000] AR6000 Neighbor Report Event
[106838.745000] bssid 00:1c:10:09:8e:32
[106838.745000] AR6000 Reg Code = 0x80000114
[106858.780000] fbcon_event_notify action=9, data=c7ea3de8
[106858.780000] jbt6k74 spi2.0: **** jbt6k74 powerdown
[106901.870000] Target debug interrupt
[106901.870000] AR6K: Location of register dump data: 0x800013A8
[106901.910000] AR6K: Register Dump:
[106901.910000] 0 : 0x20000059
[106901.910000] 1 : 0x0000087A
[106901.910000] 2 : 0x82020420
[106901.910000] 3 : 0xA10087A1
[106901.910000] 4 : 0x82020420
[106901.910000] 5 : 0x23C1C5D0
[106901.910000] 6 : 0xA10087A1
[106901.910000] 7 : 0x80004A98
[106901.910000] 8 : 0x80004A90
[106901.910000] 9 : 0x8000DBBE
[106901.910000] 10 : 0x00000076
[106901.910000] 11 : 0x80004A98
[106901.910000] 12 : 0x00000000
[106901.910000] 13 : 0x8000DB90
[106901.910000] 14 : 0x80004A90
[106901.910000] 15 : 0x800047A2
[106901.910000] 16 : 0x00000000
[106901.910000] 17 : 0x00000000
[106901.910000] 18 : 0x0000FFFF
[106901.910000] 19 : 0x00008000
[106901.910000] 20 : 0x80002620
[106901.910000] 21 : 0x80004A40
[106901.910000] 22 : 0x800047A0
[106901.910000] 23 : 0x80001558
[106901.910000] 24 : 0x800025B8
[106901.910000] 25 : 0x0000002A
[106901.910000] 26 : 0x8000DB70
[106901.910000] 27 : 0x80001558
[106901.910000] 28 : 0x00000001
[106901.910000] 29 : 0x82001804
[106901.910000] 30 : 0x80002620
[106901.910000] 31 : 0x800025B8
[106901.910000] 32 : 0xAB505706
[106901.910000] 33 : 0x80001460
[106901.910000] 34 : 0x80004A40
[106901.910000] 35 : 0x820203F8
[106901.910000] 36 : 0x18000010
[106901.910000] 37 : 0x10001C03
[106925.515000] fbcon_event_notify action=12, data=c7ea3dac
[106925.515000] jbt6k74 spi2.0: **** jbt6k74 unblank
[106925.630000] fbcon_event_notify action=9, data=c7ea3de8
[106925.630000] jbt6k74 spi2.0: **** jbt6k74 unblank
[106999.180000] +ar6000_destroy
[106999.180000] ar6000_destroy(): Disconnect
[106999.180000] ar6000_destroy(): WMI stopped
[106999.180000] --- EP : 0 ServiceID: 0x1 --------------
[106999.180000] this:0xC69A0014 next:0xC69A0080 prev:0x0
[106999.180000] DistFlags : 0x0
[106999.180000] TxCreditsNorm : 0
[106999.180000] TxCreditsMin : 0
[106999.180000] TxCredits : 0
[106999.180000] TxCreditsAssigned : 0
[106999.180000] TxCreditsSeek : 0
[106999.180000] TxCreditSize : 1544
[106999.180000] TxCreditsPerMaxMsg : 1
[106999.180000] TxCreditsToDist : 0
[106999.180000] TxQueueDepth : 0
[106999.180000] ----------------------------------------------------
[106999.180000] --- EP : 1 ServiceID: 0x100 --------------
[106999.180000] this:0xC69A0080 next:0xC69A0230 prev:0xC69A0014
[106999.180000] DistFlags : 0x80000000
[106999.180000] TxCreditsNorm : 1
[106999.180000] TxCreditsMin : 1
[106999.180000] TxCredits : 0
[106999.180000] TxCreditsAssigned : 1
[106999.180000] TxCreditsSeek : 0
[106999.180000] TxCreditSize : 1544
[106999.180000] TxCreditsPerMaxMsg : 1
[106999.180000] TxCreditsToDist : 0
[106999.180000] TxQueueDepth : 11
[106999.180000] ----------------------------------------------------
[106999.180000] --- EP : 5 ServiceID: 0x104 --------------
[106999.180000] this:0xC69A0230 next:0xC69A01C4 prev:0xC69A0080
[106999.180000] DistFlags : 0x80000000
[106999.220000] TxCreditsNorm : 5
[106999.220000] TxCreditsMin : 1
[106999.220000] TxCredits : 0
[106999.220000] TxCreditsAssigned : 0
[106999.220000] TxCreditsSeek : 0
[106999.220000] TxCreditSize : 1544
[106999.220000] TxCreditsPerMaxMsg : 1
[106999.220000] TxCreditsToDist : 0
[106999.220000] TxQueueDepth : 1
[106999.220000] ----------------------------------------------------
[106999.220000] --- EP : 4 ServiceID: 0x103 --------------
[106999.220000] this:0xC69A01C4 next:0xC69A00EC prev:0xC69A0230
[106999.220000] DistFlags : 0x0
[106999.220000] TxCreditsNorm : 5
[106999.220000] TxCreditsMin : 1
[106999.220000] TxCredits : 0
[106999.220000] TxCreditsAssigned : 0
[106999.220000] TxCreditsSeek : 0
[106999.220000] TxCreditSize : 1544
[106999.220000] TxCreditsPerMaxMsg : 1
[106999.220000] TxCreditsToDist : 0
[106999.220000] TxQueueDepth : 0
[106999.220000] ----------------------------------------------------
[106999.220000] --- EP : 2 ServiceID: 0x101 --------------
[106999.220000] this:0xC69A00EC next:0xC69A0158 prev:0xC69A01C4
[106999.220000] DistFlags : 0x80000000
[106999.220000] TxCreditsNorm : 5
[106999.220000] TxCreditsMin : 1
[106999.220000] TxCredits : 0
[106999.220000] TxCreditsAssigned : 10
[106999.220000] TxCreditsSeek : 0
[106999.220000] TxCreditSize : 1544
[106999.220000] TxCreditsPerMaxMsg : 1
[106999.220000] TxCreditsToDist : 0
[106999.220000] TxQueueDepth : 3
[106999.220000] ----------------------------------------------------
[106999.220000] --- EP : 3 ServiceID: 0x102 --------------
[106999.220000] this:0xC69A0158 next:0x0 prev:0xC69A00EC
[106999.220000] DistFlags : 0x0
[106999.220000] TxCreditsNorm : 5
[106999.220000] TxCreditsMin : 1
[106999.220000] TxCredits : 0
[106999.220000] TxCreditsAssigned : 0
[106999.220000] TxCreditsSeek : 0
[106999.220000] TxCreditSize : 1544
[106999.220000] TxCreditsPerMaxMsg : 1
[106999.220000] TxCreditsToDist : 0
[106999.220000] TxQueueDepth : 0
[106999.220000] ----------------------------------------------------
[106999.220000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106999.220000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106999.220000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106999.220000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106999.220000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106999.220000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106999.220000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106999.220000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106999.220000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106999.220000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106999.220000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106999.220000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106999.220000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106999.220000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106999.220000] ar6000_tx_complete() -TX ERROR, status: 0x10
[106999.220000] Host does not want target reset.
[107001.155000] -ar6000_destroy
[107001.155000] mmc1: card 0001 removed
[107001.205000] ar6000_wow interrupt
[107001.360000] s3c2440-sdi s3c2440-sdi: powered down.
[107001.360000] s3c2440-sdi s3c2440-sdi: powered down.
[107004.725000] s3c2440-sdi s3c2440-sdi: host detect has no irq available
[107004.725000] mapped channel 0 to 0
[107004.725000] regulator: Unable to get requested regulator: SD_3V3
[107004.725000] s3c2440-sdi s3c2440-sdi: Regulator for SD_3V3 unavilable
[107004.775000] s3c2440-sdi s3c2440-sdi: powered down.
[107004.775000] s3c2440-sdi s3c2440-sdi: running at 0kHz (requested: 0kHz).
[107004.780000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
[107004.785000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
[107004.785000] s3c2440-sdi s3c2440-sdi: initialisation done.
[107004.790000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
[107004.795000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
[107004.815000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
[107004.835000] mmc1: queuing CIS tuple 0x01 length 3
[107004.865000] mmc1: queuing CIS tuple 0x1a length 5
[107004.890000] mmc1: queuing CIS tuple 0x1b length 8
[107004.895000] s3c2440-sdi s3c2440-sdi: running at 25000kHz (requested:
25000kHz).
[107004.895000] s3c2440-sdi s3c2440-sdi: running at 25000kHz (requested:
25000kHz).
[107004.905000] mmc1: queuing CIS tuple 0x80 length 1
[107004.905000] mmc1: queuing CIS tuple 0x81 length 1
[107004.905000] mmc1: queuing CIS tuple 0x82 length 1
[107004.905000] mmc1: new SDIO card at address 0001
[107004.950000] ar6000_available
[107005.950000] BMI Get Target Info: Exit (ver: 0x20000059 type: 0x1)
[107005.955000] Block Size Set: 128 (target address:0x8000066C)
[107005.955000] eth0 (sdio_ar6000): not using net_device_ops yet
[107005.955000] ar6000_init() Got WMI @ 0xc7a23600.
[107006.010000] mac address = 00:12:cf:8e:ef:27
[107006.010000] AR6000 Reg Code = 0x40000060
[107006.010000] ar6000_init() WMI is ready
[107006.080000] ar6000_avail: name=eth0 htcTarget=0xc69a0000, dev=0xc699e000
(0), ar=0xc699e460
[107006.670000] Connect called with authmode 1 dot11 auth 1 PW crypto 1 PW
crypto Len 0 GRP crypto 1 GRP crypto Len 0
[107006.680000] AR6000 disconnected
[107006.680000]
[107006.680000] Disconnect Reason is 3
[107006.680000] Protocol Reason/Status Code is 0
[107006.680000] AssocResp Frame = NULL
[107007.980000] AR6000 connected event on freq 2472 with bssid
00:1c:10:09:8e:32 listenInterval=100, beaconInterval = 100, beaconIeLen = 0
assocReqLen=29 assocRespLen =22
[107007.980000] Network: Infrastructure
[107007.980000]
[107007.980000] AssocRespIEs= 01 08 82 84 8b 96 0c 18 30 48 32 04 12 24 60 6c
[107007.980000] AssocReqIEs= 00 07 6c 69 6e 6b 73 79 73 01 08 82 84 8b 0c 12 96
18 24 32 04 30 48 60 6c
[107010.405000] AR6000 scan complete: 0
[107010.410000] AR6000 Neighbor Report Event
[107010.410000] bssid 00:1c:10:09:8e:32
[107010.410000] AR6000 Reg Code = 0x80000114
[107037.815000] fbcon_event_notify action=9, data=c7ea3de8
[107037.815000] jbt6k74 spi2.0: **** jbt6k74 powerdown
[107078.095000] AR6000 scan complete: 0
[107078.095000] AR6000 Neighbor Report Event
[107078.095000] bssid 00:1c:10:09:8e:32
[107142.305000] AR6000 scan complete: 0
[107142.305000] AR6000 Neighbor Report Event
[107142.305000] bssid 00:1c:10:09:8e:32
Tue Feb 10 06:37:06 GMT 2009
eth0 AR6000 802.11g ESSID:"linksys"
Mode:Managed Frequency:2.472 GHz Access Point: 00:1C:10:09:8E:32
Bit Rate=54 Mb/s Tx-Power=15 dBm Sensitivity=0/3
Retry:on
Encryption key:off
Power Management:off
Link Quality:201/94 Signal level:-150 dBm Noise level:-96 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:1 Invalid misc:0 Missed beacon:0
eth0 Scan completed :
Cell 01 - Address: 00:1A:73:C8:9D:A8
ESSID:"Motorola"
Mode:Master
Frequency:2.412 GHz (Channel 1)
Quality=12/94 Signal level=-83 dBm Noise level=-95 dBm
Encryption key:on
Extra:bcn_int=100
Extra:wpa_ie=dd160050f20101000050f20001000050f20001000050f202
Cell 02 - Address: 00:1A:70:ED:2E:52
ESSID:"WII NATION"
Mode:Master
Frequency:2.462 GHz (Channel 11)
Quality=3/94 Signal level=-92 dBm Noise level=-95 dBm
Encryption key:on
Extra:bcn_int=100
Extra:wpa_ie=dd180050f20101000050f20201000050f20201000050f2020c00
Extra:wmm_ie=dd180050f2020101000003a4000027a4000042435e0062322f00
Cell 03 - Address: 00:60:64:1F:3C:10
ESSID:"wireless"
Mode:Master
Frequency:2.437 GHz (Channel 6)
Quality=8/94 Signal level=-87 dBm Noise level=-95 dBm
Encryption key:on
Extra:bcn_int=100
Cell 04 - Address: 00:1C:10:09:8E:32
ESSID:"linksys"
Mode:Master
Frequency:2.472 GHz (Channel 13)
Quality=39/94 Signal level=-56 dBm Noise level=-95 dBm
Encryption key:off
Extra:bcn_int=100
eth0 Link encap:Ethernet HWaddr 00:12:CF:8E:EF:27
inet addr:192.168.0.33 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:534 errors:0 dropped:0 overruns:0 frame:0
TX packets:430 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:102989 (100.5 KiB) TX bytes:147477 (144.0 KiB)
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 usb0
192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0
Wed Feb 11 12:13:23 GMT 2009
eth0 AR6000 802.11g ESSID:"linksys"
Mode:Managed Frequency:2.472 GHz Access Point: 00:1C:10:09:8E:32
Bit Rate=65.535 Mb/s Tx-Power=0 dBm Sensitivity=0/3
Retry:on
Encryption key:off
Power Management:off
Link Quality:204/94 Signal level:-147 dBm Noise level:-96 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:51 Invalid misc:0 Missed beacon:0
eth0 Scan completed :
Cell 01 - Address: 00:1C:10:09:8E:32
ESSID:"linksys"
Mode:Master
Frequency:2.472 GHz (Channel 0)
Quality=39/94 Signal level=-56 dBm Noise level=-95 dBm
Encryption key:off
Extra:bcn_int=100
eth0 Link encap:Ethernet HWaddr 00:12:CF:8E:EF:27
inet addr:192.168.0.33 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2144558 errors:0 dropped:0 overruns:0 frame:0
TX packets:21706 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:3179291079 (2.9 GiB) TX bytes:1243917 (1.1 MiB)
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 usb0
192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0
_______________________________________________
devel mailing list
devel@lists.openmoko.org
https://lists.openmoko.org/mailman/listinfo/devel