On Sun, 19 Jul 2009 01:03:47 +0530 RANJAN <infi...@gmail.com> wrote: > YOu mean this thing will work on any DISTRO?Also ser2net and picocom > are to be loaded into a PC which openmoko wants to talk to?Right.
It should work on any distro that has a driver module for your USB->serial converter. And since the distros more or less shares the kernel source they either all have support for your specific hardware or none has. The "Sure. It should work just like on your PC." I believe was to be interpreted as: If you know how to access the USB->serial converter serial port on your desktop PC, then the procedure/programming required on a Freerunner is the same. NOTE: On the Freerunner you probably have to switch the USB controller into "host" mode first (see the wiki) One of the brilliant things about running Linux on a phone is the fact that your phone is then behaving just like your PC (running Linux) > > Sriranjan > > On Sun, Jul 19, 2009 at 12:05 AM, Timo Juhani Lindfors > <timo.lindf...@iki.fi > > wrote: > > > RANJAN <infi...@gmail.com> writes: > > > I want to make free runner communicate with an embedded device > > > and for > > that > > > I need a serial port.Can I use a USB to serial converter on the > > > free > > runner > > > and how shall I do the serial communication?(software and > > > hardware?) > > > > Sure. It should work just like on your PC. > > > > You load the usb-serial module and a /dev/ttyUSB* device will > > appear. Then you can use e.g. ser2net or picocom to talk to it. > > > > > > > > > > _______________________________________________ devel mailing list devel@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/devel
