Well,I installed distutils from feedbrowser here http://www.angstrom-distribution.org/repo/?pkgname=python-distutils But when I tried to install pyserial got the following error message: *r...@om-gta02 ~/tmp/pyserial-2.4 $ python setup.py install standart distutils running install error: invalid Python installation: unable to open /usr/include/python2.6/pyconfig.h (No such file or directory)*
Please suggest. Thanks and Regards Sriranjan On Sun, Jul 26, 2009 at 12:32 AM, RANJAN <infi...@gmail.com> wrote: > To do the serial comm I tried to install pyserial in the free runner.I got > error saying "No module distutils.core"Any way I can solve this? > > Or it will be solved right away using picocom or ser2net? > > Sriranjan > > On Sun, Jul 19, 2009 at 11:59 AM, RANJAN <infi...@gmail.com> wrote: > >> Thanks.Will try and get back. >> Regards >> Sriranjanst >> >> >> On Sun, Jul 19, 2009 at 11:53 AM, Visti Andresen <ta...@talpa.dk> wrote: >> >>> On Sun, 19 Jul 2009 01:03:47 +0530 >>> RANJAN <infi...@gmail.com> wrote: >>> >>> > YOu mean this thing will work on any DISTRO?Also ser2net and picocom >>> > are to be loaded into a PC which openmoko wants to talk to?Right. >>> >>> It should work on any distro that has a driver module for your >>> USB->serial converter. >>> And since the distros more or less shares the kernel source they either >>> all have support for your specific hardware or none has. >>> >>> The "Sure. It should work just like on your PC." I believe was to be >>> interpreted as: >>> If you know how to access the USB->serial converter serial port on your >>> desktop PC, then the procedure/programming required on a Freerunner is >>> the same. >>> >>> NOTE: On the Freerunner you probably have to switch the USB controller >>> into "host" mode first (see the wiki) >>> >>> One of the brilliant things about running Linux on a phone is the fact >>> that your phone is then behaving just like your PC (running Linux) >>> >>> > >>> > Sriranjan >>> > >>> > On Sun, Jul 19, 2009 at 12:05 AM, Timo Juhani Lindfors >>> > <timo.lindf...@iki.fi >>> > > wrote: >>> > >>> > > RANJAN <infi...@gmail.com> writes: >>> > > > I want to make free runner communicate with an embedded device >>> > > > and for >>> > > that >>> > > > I need a serial port.Can I use a USB to serial converter on the >>> > > > free >>> > > runner >>> > > > and how shall I do the serial communication?(software and >>> > > > hardware?) >>> > > >>> > > Sure. It should work just like on your PC. >>> > > >>> > > You load the usb-serial module and a /dev/ttyUSB* device will >>> > > appear. Then you can use e.g. ser2net or picocom to talk to it. >>> > > >>> > > >>> > > >>> > > >>> > > >>> >>> _______________________________________________ >>> devel mailing list >>> devel@lists.openmoko.org >>> https://lists.openmoko.org/mailman/listinfo/devel >>> >> >> >
_______________________________________________ devel mailing list devel@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/devel