I can confirm the same error, I installed it a few hours ago and not rebooted yet to confirm the rest.
>> ++ (7/7) >>> net-wireless/broadcom-sta-5.100.82.38-r1#3.0.0-sabayon >> ## Unpacking package: net-wireless:broadcom-sta-5.100.82.38-r1#3.0.0-sabayon~0.tbz2 >> ## SPM: pre-install phase * Package: net-wireless/broadcom-sta-5.100.82.38-r1 * Repository: gentoo * USE: amd64 elibc_glibc kernel_linux multilib userland_GNU * FEATURES: preserve-libs sandbox splitdebug * Checking for suitable kernel configuration options... * CONFIG_B43: should not be set. But it is. * CONFIG_SSB: should not be set. But it is. * CONFIG_MAC80211: should not be set. But it is. * Please check to make sure these options are set correctly. * Failure to do so may cause unexpected problems. >> ## Installing package: net-wireless/broadcom-sta-5.100.82.38-r1#3.0.0-sabayon >> ## [Broadcom's IEEE 802.11a/b/g/n hybrid Linux device driver.] >> ## Updating database: net-wireless/broadcom-sta-5.100.82.38-r1#3.0.0-sabayon >> ## Cleaning previously installed application data. >>> Regenerating /etc/ld.so.cache... >> ## SPM: post-install phase * Updating module dependencies for 3.0.0-sabayon ... [ ok ] >> ## Cleaning: net-wireless/broadcom-sta-5.100.82.38-r1#3.0.0-sabayon >> @@ Installation complete. Switching to nvidia OpenGL interface... done !!! Error: Target "3.0.0-sabayon" doesn't appear to be valid! exiting >> sys-kernel/linux-sabayon-3.0-r3 has been installed. >> Attention: some external drivers cannot work across multiple kernels. >> Please reboot your computer now ! On Sat, Jul 23, 2011 at 10:17 AM, Lorenzo Cogotti <[email protected]>wrote: > By the way, kernel-switcher didn't update my kernel sources package, I > had to manually update them. > > I ran: > equo install linux-sources > > but that didn't update the sabayon-sources package (since apparently > there is still no linux-sources-3.0 package), I had to manually run: > equo install sabayon-sources > > this command correctly installed the sabayon-sources-3.0-r3 package. > > Il giorno sab, 23/07/2011 alle 18.08 +0200, Lorenzo Cogotti ha scritto: > > When updating to linux-3.0, using kernel switcher, exact command: > > kernel-switcher switch linux-sabayon-3.0-r3 > > > > I got this output, after the usual modules installation: > > > > * Updating module dependencies for 3.0-sabayon ... > > [ ok ] > > * Please report kernel bugs at: > > * http://bugs.sabayon.org > > * The source code of this kernel is located at > > * =sys-kernel/sabayon-sources-3.0-r3. > > * Sabayon Linux recommends that portage users install > > * sys-kernel/sabayon-sources-3.0-r3 if you want > > * to build any packages that install kernel modules > > * (such as ati-drivers, nvidia-drivers, virtualbox, etc...). > > >> ## Cleaning: sys-kernel/linux-sabayon-3.0-r3 > > >> @@ Installation complete. > > Switching to ati OpenGL interface... done > > !!! Error: Target "3.0.0-sabayon" doesn't appear to be valid! > > exiting > > >> sys-kernel/linux-sabayon-3.0-r3 has been installed. > > >> Attention: some external drivers cannot work across multiple kernels. > > >> Please reboot your computer now ! > > > > it seems that kernel-switcher tries to eselect the: > > linux-3.0.0-sabayon > > kernel, but eselect kernel list reports: > > eselect kernel list > > Available kernel symlink targets: > > [1] linux-2.6.39-sabayon > > [2] linux-3.0-sabayon > > > > So it should actually set the: > > linux-3.0-sabayon > > kernel. > > > > I am using Sabayon 6 Gnome, fully updated from Limbo, amd64 > > architecture. > > > > > > > > > >
