Hi,

         I have downloaded the open-fcoe-upstream and was able to build it
successfully. There is no problem on the initiator side, it's working fine.
But I have problem on target side. Fcoe target is built and inserted
successfully. When I try to enable NIC using "fcconf eth1 enable" I am
getting the following error,

fcconf: device file /dev/openfc does not exist- check udev and rules.

On the initiator side, there is no problem with "fcconf eth1 enable", it's
showing "Online". The output of the command "fcconf eth1 target" is as
follows,

eth1 target ports:
FC ID     WWPN                     State      Role
010102    20:00:00:30:48:97:49:ed  Online     FCP Target

But if I execute "fcconf eth1 lun", it's not showing anything. Can anybody
please help me on this. The following are the settings for NICs on initiator
and target side.

fcconf eth1 settings (Initiator side)
--------------------------------------
HBA 0: fcoe Port 0 20:00:00:30:48:92:a6:07
Port ID 000000
Actual Data Rate:           1 Gbps
Supported Data Rates:       1 Gbps
Supported FC-4 Types:       FCP, CT
Active FC-4 Types:          FCP, CT
Frame Size:                 1452
Maximum Frame Length:       1452
Node Name:                  10:00:00:30:48:92:a6:07
Port Name:                  20:00:00:30:48:92:a6:07
Enable HBA:                 no
Vendor ID for RNID:         20:00:00:30:48:92:a6:07
Physical Port:              0
Management IP Version:      none
Management Unit Type:       Host
Management UDP/TCP Port:    0
Management Protocol:        SNMP
VLAN priority:              none
FCoE protocol version:      T11

fcconf eth1 settings (Target side)
-----------------------------------------------------------------
HBA 0: fcoe Port 0 20:00:00:30:48:97:49:ed
Port ID 000000
Actual Data Rate:           1 Gbps
Supported Data Rates:       1 Gbps
Supported FC-4 Types:
Active FC-4 Types:
Frame Size:                 2112
Maximum Frame Length:       2112
Node Name:                  10:00:00:30:48:97:49:ed
Port Name:                  20:00:00:30:48:97:49:ed
Enable HBA:                 no
Vendor ID for RNID:         00:00:00:00:00:00:00:00
Physical Port:              0
Management IP Version:      none
Management UDP/TCP Port:    0
Management Protocol:        SNMP
VLAN priority:              none
FCoE protocol version:      T11


Regards,
Gulam.
_______________________________________________
devel mailing list
[email protected]
http://www.open-fcoe.org/mailman/listinfo/devel

Reply via email to