Gulam, You should see some SCSI disks sda/sdb on initiator if everything is working fine. Not sure about the "fccconf eth1 lun" command.
See the dmesg log if any disks are exported from target to initiator via fcoe. -Miline On Fri, Aug 22, 2008 at 12:19 PM, Gulam Mohamed <[EMAIL PROTECTED]> wrote: > Hi Milind, > > I got your mail id from the devel list. I have configured both fcoe > initiator and target. On Initiator side, when I run the command "fcconf eth1 > target", I am getting the following output: > > eth1 target ports: > FC ID WWPN State Role > 010102 20:00:00:30:48:97:49:ed Online FCP Target > > But if I execute "fcconf eth1 lun", it's not showing anything. Can you > please help me on this and provide me some pointers? The following are the > settings for NICs on initiator and target side. > > fcconf eth1 settings (Initiator side) > -------------------------------------- > HBA 0: fcoe Port 0 20:00:00:30:48:92:a6:07 > Port ID 000000 > Actual Data Rate: 1 Gbps > Supported Data Rates: 1 Gbps > Supported FC-4 Types: FCP, CT > Active FC-4 Types: FCP, CT > Frame Size: 1452 > Maximum Frame Length: 1452 > Node Name: 10:00:00:30:48:92:a6:07 > Port Name: 20:00:00:30:48:92:a6:07 > Enable HBA: no > Vendor ID for RNID: 20:00:00:30:48:92:a6:07 > Physical Port: 0 > Management IP Version: none > Management Unit Type: Host > Management UDP/TCP Port: 0 > Management Protocol: SNMP > VLAN priority: none > FCoE protocol version: T11 > > fcconf eth1 settings (Target side) > ----------------------------------------------------------------- > HBA 0: fcoe Port 0 20:00:00:30:48:97:49:ed > Port ID 000000 > Actual Data Rate: 1 Gbps > Supported Data Rates: 1 Gbps > Supported FC-4 Types: > Active FC-4 Types: > Frame Size: 2112 > Maximum Frame Length: 2112 > Node Name: 10:00:00:30:48:97:49:ed > Port Name: 20:00:00:30:48:97:49:ed > Enable HBA: no > Vendor ID for RNID: 00:00:00:00:00:00:00:00 > Physical Port: 0 > Management IP Version: none > Management UDP/TCP Port: 0 > Management Protocol: SNMP > VLAN priority: none > FCoE protocol version: T11 > > Thanks & Regards, > Gulam Mohamed. > -- Milind Dumbare Sr. Systems Engg. Linsyssoft Technologies. _______________________________________________ devel mailing list [email protected] http://www.open-fcoe.org/mailman/listinfo/devel
