Hi!

There's actually quite a nice service to share Wireshark dumps at
https://www.cloudshark.org/

Using this page, you won't run into size restrictions on this mailing list the
next time.

Cheers,
Oleg

On Mon, Jan 04, 2016 at 01:49:17AM +0100, Mateusz Kubaszek wrote:
> Forgotten attachments...
> 
> 2016-01-04 1:46 GMT+01:00 Mateusz Kubaszek <[email protected]>:
> 
> > Hi everyone!
> >
> > A few days ago I ran a sniffer application using CC1101 transceiver.
> > Sniffing device is connected via UART<->USB adapter to PC. A python sniffer
> > application redirects the frames to Wireshark (v. 2.0.0).
> > Sniffer was gathering frames from one node programmed with gnrc-networking
> > example application. This node was sending a frame in every 10 seconds. The
> > problem is that Wireshark did not recognize any 803.15.4 frames. Digging
> > deeper into a 803.15.4 frame, controll part (first octet) look like:
> >
> > bits        description
> > 0-2         frame type (000 Beacon, 001 Data, 010 Ack, 011 MAC command,
> > 100-111 Reserved)
> > 3            security
> > 4            frame pending
> > 5            AR
> > 6            PAN ID Compression
> > 7-9        Reserved
> > 10-11    Dest. Addressing Mode (00 PAN and addr. not present, 01 Reserved,
> > 10 Short address, 11 Ext. Address)
> > 12-13    Frame Version (00 IEEE802.15.4-2003 compatible, 01 IEEE802.15.4
> > compatible)
> > 14-15    Source Addressing Mode (00 PAN and addr. not present, 01
> > Reserved, 10 Short address, 11 Ext. Address)
> >
> > The received data has wrong source address mode (picture in attachment).
> > Why is there no compatibility with IEEE802.15.4 standard?
> > Is there anyone with knowledge concerning sniffing radio packets in RIOT
> > powered mesh using Wireshark? Is there a possibility to recognize 802.15.4
> > packet types using standard Wireshark dissector?
> >
> > Best regards,
> > Kubaszek Mateusz
> >



> _______________________________________________
> devel mailing list
> [email protected]
> https://lists.riot-os.org/mailman/listinfo/devel


-- 
panic("Halt failed!");
        linux-2.6.6/arch/sparc/kernel/process.c

Attachment: signature.asc
Description: PGP signature

_______________________________________________
devel mailing list
[email protected]
https://lists.riot-os.org/mailman/listinfo/devel

Reply via email to