Jose, is the following PR yours? https://github.com/RIOT-OS/RIOT/pull/5552 What's the status of the PR, are you still working on it?
2016-06-16 17:30 GMT+02:00 Oleg Hahm <oliver.h...@inria.fr>: > Hi José! > > On Thu, Jun 16, 2016 at 05:18:32PM +0200, Jose Alamos wrote: >> I'm porting the OpenThread stack to RIOT. I have hooks for sending and >> receiving frames and for transmision/reception "Done" signals (TransmitDone >> and ReceiveDone) >> >> In their examples they are manually checking/sending IEEE802.15 ACK before >> calling the corresponding Done hook, but I'm not sure if I should do the >> same from RIOT. Are drivers in charge of handling these ACKs (so RIOT's >> TX_COMPLETE is triggered after receiving ACK)? >> >> Basically I have to call the TransmitDone hook when the transmission is >> done, and that's only if the ACK is received. > > That's dependent on the driver and (at least in principle) on its > configuration. For the at86rf2xx the current driver sends ACKs automatically > and the caller will get the TX_COMPLETE if an ACK was received (or > transmissions was broadcast). > > Cheers, > Oleg > -- > printk(CARDNAME": Bad Craziness - sent packet while busy.\n" ); > linux-2.6.6/drivers/net/smc9194.c > > _______________________________________________ > devel mailing list > devel@riot-os.org > https://lists.riot-os.org/mailman/listinfo/devel > -- Baptiste _______________________________________________ devel mailing list devel@riot-os.org https://lists.riot-os.org/mailman/listinfo/devel