No one has posted publicly about these in 5 days and asking privately a group of mvme users, I only got feedback from Heinz
============== I can only note that we have some (many) users who would like to stay at the fixed 9600 baud because that is what they have been used to since "forever”. I had received feedback on the MVME2500. There I had set the console of this QorIQ based system to the typical 125600 baud for arm (also with the option BSP_CONSOLE_BAUD). Some were not happy that there are two different baud rates for the different MVME boards. I personally find Paul's approach ok and if the default value (bsp-defaults) eventually stays at 9600 baud on all these boards could everyone be happy? ============== This patch series makes all the mvme BSPs consistent so I plan to merge these today. --joel On Sat, Apr 10, 2021 at 7:41 AM <dufa...@hda.com> wrote: > From: Peter Dufault <dufa...@hda.com> > > The "powerpc/shared/console" code has the start-up console value fixed > at 9600 baud. This changes the hard-wired constant "9600" in the code > to the configuration setting "BSP_CONSOLE_BAUD" and adds configuration > support in both the "waf" and the legacy configuration systems. > > In addition, once the shared console baud rate can be set to start at > anything other than 9600 the termios code will reset it to 9600 at the > first open. > > Peter Dufault (2): > powerpc/shared/console: Make console baud rate configurable. > powerpc/shared/console: "termios" first open sets console baud to 9600 > > bsps/powerpc/shared/console/console.c | 4 ++-- > bsps/powerpc/shared/console/uart.c | 5 ++++- > c/src/lib/libbsp/powerpc/beatnik/configure.ac | 4 ++++ > c/src/lib/libbsp/powerpc/haleakala/configure.ac | 4 ++++ > c/src/lib/libbsp/powerpc/motorola_powerpc/configure.ac | 4 ++++ > c/src/lib/libbsp/powerpc/mvme3100/configure.ac | 4 ++++ > c/src/lib/libbsp/powerpc/mvme5500/configure.ac | 4 ++++ > spec/build/bsps/optconsolebaud.yml | 5 +++++ > spec/build/bsps/powerpc/beatnik/bspbeatnik.yml | 2 ++ > spec/build/bsps/powerpc/haleakala/bsphaleakala.yml | 2 ++ > spec/build/bsps/powerpc/motorola_powerpc/obj.yml | 4 +++- > spec/build/bsps/powerpc/mvme3100/bspmvme3100.yml | 2 ++ > spec/build/bsps/powerpc/mvme5500/bspmvme5500.yml | 2 ++ > 13 files changed, 42 insertions(+), 4 deletions(-) > > -- > 1.8.3.1 > > _______________________________________________ > devel mailing list > devel@rtems.org > http://lists.rtems.org/mailman/listinfo/devel >
_______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel